HP G62 Battery causes slow boot - take battery out and boots normally - HP G62-340US Notebook

All,
Very strange thing going on, and I've not seen it on these forums, so here I go.
Turn on laptop, the HP screen appears, and about 20 minutes later, Windows starts loading.
Turn off laptop, pull the battery, turn on the laptop, and Windows starts loading within 10 seconds (normal).
When the battery is in, EVERYTHING takes 15-20 minutes to start.  If I select F2 for settings, it takes that long.  If I hit F10 (or possibly F8), same delay.      If I take the battery out, it works perfectly.
So....I of course assume bad battery......but I've never seen this type of behavoir in ANY computer previously.
Any suggestions?
HP G62-340US Notebook 
Windows 7 Home Premium
No error message and no changes made to system.
Thanks
Donlen

Hi
Have you tried to run the Start up test from F2 option did they pass.
Please update the Bios, Graphic & Chipset driver from the HP website and have it checked.
Hi
Try this:
Disconnect AC
Shutdown
Remove battery
Connect AC
Startup
Open Device Manager
Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
Click the plus (+) sign next to System Devices.
Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
Shutdown
Disconnect AC
Insert battery
Connect AC
Startup
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • My Macbook will not boot the operating system.  It just goes to a blue screen after the apple logo and the spinning wheel goes off.  I took the battery out and held the on/off button for five seconds and reset the PRAM.  I have the old mac os disk.

    My macbook will not boot.  It goes to a blue screen after the logo and wheel goes off.  I have taken the battery out and held the on/off button for five seconds and reset the PRAM.  I have the the original os disk but have not put it in for fear of losing un backed op data.
    Thanks
    Rich

    You won't lose any data unless you erase your hard drive.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

  • Dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?

    dv 6809wm laptop. Computer still does not boot up when battery out and ac adapter plugged in?
    It lights up initially for a split second when I push power button, but does not continue to boot up. When ac adaptor is put in it glows blue like it is supposed to. Any suggestions?

    i'm going to try to see if a different ac adaptor will work hopefully that solves the issue.

  • HT4060 I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual

    I'm having some problems with my ipad and charging it. I am having to leave it in charge for a lot longer, but when I take it out and want to use it the battery is still not completely full and goes down a lot faster than usual. The other day, I had charged  my iPad overnight so that I could take it to university with me for the day, and when I had switched it on the next day the battery was on 5% and I had not used it since charge.

    Your battery may be dying. THey are only good for so many charges/discharges. If you have an apple store near by make an appointment and have them check itout

  • Blackberry 8530 Curve will not download new pictures without taking battery out and resetting.

    Recently my BB 8530 will not download a new picture taken without taking the battery out and resetting. What is causing this issue?  Thank you.

    Hi and welcome to the forums haibieb!
    A couple of places for you to visit: Blackberry 101     Tips & Tricks
    And is the pic stored once you do a battery pull?
    Where are you storing your camera picS?  Media card or device memory?  and
    What is the setting on your reserve pictures memory? You may be exceeding that limit especially if your file size is too large.
    Let us know.  Happy to have you here!
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • We have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe nor light on the magsafe

    we have a 2009 white macbook it got to 7% power was shut down wont recharge tried taking the battery out and magsafe no light on the magsafe or power on the macbook? do we need a new magsafe or has the battery died?

    Hi degsy t,
    If you feel you may have potential battery or charger issues with your MacBook, you may find the troubleshooting steps in the following article helpful:
    Mac notebooks: All about batteries
    http://support.apple.com/kb/ht1446
    Regards,
    - Brenden

  • I bought an iphone 4s factory unlocked. Can i set it up with my sim card in canada then take it out and bring the phone to iran without any problems?

    I I bought an iphone 4s factory unlocked. Can i set it up with my sim card in canada then take it out and bring the phone to iran without any problems?

    A legitimately unlocked iPhone should work with any compatible 3G GSM carrier. The iPhone, however, is considered 'restricted technology, and cannot be legally taken to Iran.

  • I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

    I was updating my iphone and i deleted everything now it say there is no sim in the phone, i have gone to the iphone shop and they say is is working The sim is in the phone . when i take it out and put it in another phone i can call and recieve calls

    I did call apple care and they guided me through everything..  they said it was the hardware
    I was given this phone last year as a present
    i know, it was not new.. so it could have been on an other cell provider  i am not sure if it was so at the moment that is all i can do

  • Myipad  show that there is no SIM card althoght there is sim and I try to take it out and but it back but it still give me the same massage no SIM card

    Myipad  show that there is no SIM card althoght there is sim and I try to take it out and but it back but it still give me the same massage no SIM card, how I can fix that ?

    Kind of what I figured.....will I be able to sync to iTunes in future as many times as I want without the SIM card (once it's activated again)?

  • I have a 16GB iPhone 3G and my screen will not work. When I have my sim card inserted into the phone calls go through, but I take it out and they don't go through. It was fine one minute and then the screen flashed and now it will not work. any answers?

    I own a 16GB iPhone 3G. My father passed it down to me a year ago after he got the iPhone 4. I pressed the sleep/wake button on the top of the iPhone to check the time, and as I did so, the screen flashed on and off and now the screen won't work. Whenever I put my simcard in there calls will go through but I am unable to hear them, but if I take it out calls don't go through. I've tried charging it for a while, connecting to my laptop, holding the sleep/wake button and the home button for 10seconds to restore it, but nothing works. I've looked around and no-one'ed seemed to have this problem. I'd like to know what is wrong with my iPhone ASAP. thanks.

    First, update iTunes, then connect the phone to the computer and do a restore. This will also get your iOS up to date. Your phone should operate correctly after doing this, if not, you will most likely need to have the phone serviced or replaced.

  • Netfs causing slow boot, waiting for wifi?

    Since adding netfs to the daemons in rc.conf my laptop takes about 30-40secs longer to startup. I realise netfs must be waiting for the network (WiFi) to connect but I have nfsd running as background (@) so I don't know how to fix this.
    Actually I don't need the mounted NFS drive from boot so maybe I can run some script from rc.local to start nfs later and mount the drives?
    My computer has a static IP setup in network client, could I fix the problem above by "hardwiring" the net config from rc.conf, making the WiFi connect faster?
    Last edited by dabbi2000 (2011-11-27 14:10:56)

    nfsd is the nfs server - are you sure you need that running on your laptop?
    You didn't say which network utility you're using, but afaik all of them have some do-this-after-connecting facility e.g. netcfg has PRE_UP/POST_UP/PRE_DOWN/POST_DOWN - I use that to make sure my nfs shares are mounted/unmounted after/before the network comes up/down.

  • My i phone will not turn on should i or can i take the battery out and put it back in and if so how do i do this ?

    My i phone will not turn on this am after I had made a phone call. I have tried to recharge it but no change. I need to know whether or not I can remove battery and if so how do I open the case ?

    Just read the solution from raymze so thank you this has worked - I held the home and sleep button together and it has rebooted. Many Thanks.

  • Took the battery out and put it back in, now I can't get the phone on!

    We were told that it was good for the phone if the battery were removed and put back in so it can reboot. I did that and I can't get the phone back on! Sometimes (not everytime) I'll get the red light to come on, but still nothing. I tried inseerting another bb battery from a Curve and when the red light came on, I held the 'end call' button and then when it went off I held the green 'make call' button and teh screen displayed a battery with a line through it. That same battery works fine in the curve so I am just confused about what else I should be trying.
    Can anyone help me out here??? 

    did you try to insert the pearl-battery and connect it to the wallcharger? maybe the battery is completly empty.
    does the screen display something? 
    If your question was answered, please accept it as a sollution and / or give Kudos ;-)
    Use the Search Field first! Maybe the question you want to ask already exists!

  • Can RAM cause slow startup, loss of chime, and forgetting logged account?

    Recently the iMac (Mid 2011 10.7.5) at work got the RAM upgraded with 2 4GB DDR3 1333 MHz.
    Things I've noticed:
    startup is much slower, with no chime
    sometimes requires me to relog into my account when I didn't log out the day before
    Apple Hardware Test, long and short says everything is fine
    Disk Utility also says everything is fine other than some permissions changed
    Ram has increased the ability to use more applications at a time
    Spotlight sometimes doesn't work
    Affects browser some times:
    Chrome would load a page and then the stuff would disappear a few seconds after
    Firefox does not do this
    Restarting fixes it
    So I'm just wondering if this is just an inconvenience or do I have a serious problem here. Another computer with the same upgrade does not have any start up problems like I do.

    Sorry to bother you again, but my computer has shown symptons again. Here is the entire log before I had to restart to "fix" it. Any help is much appreciated.
    Apr 29 07:59:41 localhost bootlog[0]: BOOT_TIME 1367247581 0
    Apr 29 08:00:20 localhost com.apple.kextd[9]: Safe boot mode detected; invalidating system extensions caches.
    Apr 29 08:00:20 localhost com.apple.kextd[9]: Cache file /System/Library/Caches/com.apple.kext.caches/Directories/System/Library/Extensi ons/KextIdentifiers.plist.gz is out of date; not using.
    Apr 29 07:59:42 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Apr 29 08:00:20 localhost com.apple.launchd[1] (com.apple.powerd): Unknown value for key POSIXSpawnType: Interactive
    Apr 29 08:00:20 localhost com.apple.launchd[1] (com.apple.sandboxd): Unknown value for key POSIXSpawnType: Interactive
    Apr 29 08:00:26 localhost com.apple.pfctl[30]: No ALTQ support in kernel
    Apr 29 08:00:26 localhost com.apple.pfctl[30]: ALTQ related functions disabled
    Apr 29 08:00:26 localhost com.apple.ucupdate.plist[21]: ucupdate: Checked 1 update, no match found.
    Apr 29 08:00:32 localhost UserEventAgent[10]: starting CaptiveNetworkSupport as SystemEventAgent built May 25 2011 12:27:35
    Apr 29 08:00:32 localhost UserEventAgent[10]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    Apr 29 08:00:32 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Apr 29 08:00:32 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Apr 29 08:00:35: --- last message repeated 1 time ---
    Apr 29 08:00:32 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Apr 29 08:00:32 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Apr 29 08:00:35: --- last message repeated 1 time ---
    Apr 29 08:00:32 localhost UserEventAgent[10]: CertsKeychainMonitor: configuring
    Apr 29 08:00:36 localhost com.apple.usbmuxd[20]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    Apr 29 08:00:36 localhost mDNSResponder[33]: mDNSResponder mDNSResponder-320.16 (Jul 19 2012 21:07:07) starting OSXVers 11
    Apr 29 08:00:36 localhost com.apple.revisiond[28]: 2013-04-29 08:00 revisiond[28] (CarbonCore.framework) implementation_callback_rpc: ERROR: CFDictionaryGetValue(FSEvents_streamDict, cfPortNumber) => NULL
    Apr 29 08:00:38 localhost UserEventAgent[10]: ServermgrdRegistration cannot load config data
    Apr 29 08:00:38 localhost systemkeychain[66]: done file: /var/run/systemkeychaincheck.done
    Apr 29 08:00:38 localhost UserEventAgent[10]: get_backup_share_points no AFP
    Apr 29 08:00:39 localhost mDNSResponder[33]: D2D_IPC: Loaded
    Apr 29 08:00:39 localhost mDNSResponder[33]: D2DInitialize succeeded
    Apr 29 08:00:39 localhost org.apache.httpd[17]: httpd: Could not reliably determine the server's fully qualified domain name, using ::1 for ServerName
    Apr 29 08:00:39 localhost airportd[59]: _processDLILEvent: en1 attached (down)
    Apr 29 08:00:39 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Apr 29 08:00:39: --- last message repeated 1 time ---
    Apr 29 08:00:39 localhost UserEventAgent[10]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Apr 29 08:00:41 localhost blued[49]: [BluetoothHIDDevice] CreateHIDDeviceInterface(): Failed to create **plugInInterface via IOCreatePlugInInterfaceForService
    Apr 29 08:00:41 localhost blued[49]: [BluetoothHIDDevice][hidDeviceInterface] Could not create HID Device Interface
    Apr 29 08:00:41 localhost blued[49]: [BluetoothHIDDevice][hidDeviceInterfaceOpen] NULL hidDeviceInterface
    Apr 29 08:00:41 localhost blued[49]: [setFeatureWithReportID] Could not open hidDeviceInterface
    Apr 29 08:00:41 localhost rpcsvchost[83]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    Apr 29 08:00:42 localhost configd[14]: bootp_session_transmit: bpf_write(en1) failed: Network is down (50)
    Apr 29 08:00:42 localhost configd[14]: DHCP en1: INIT transmit failed
    Apr 29 08:00:42 localhost configd[14]: network configuration changed.
    Apr 29 08:00:42 *********-iMac configd[14]: setting hostname to "*********-iMac.local"
    Apr 29 08:00:42 *********-iMac stackshot[24]: Timed out waiting for IOKit to finish matching.
    Apr 29 08:00:45 *********-iMac com.apple.kextd[9]: Cache file /System/Library/Caches/com.apple.kext.caches/Startup/IOKitPersonalities_x86_64. ioplist.gz is out of date; not using.
    Apr 29 08:00:48 *********-iMac netbiosd[88]: Unable to start NetBIOS name service:
    Apr 29 08:00:48 *********-iMac com.apple.kextd[9]: Can't load AppleSMCPDRC.kext - ineligible during safe boot.
    Apr 29 08:00:48 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleSMCPDRC failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load AppleMCCSControl.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleMCCSControl failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load AppleThunderboltEDMSink.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleThunderboltEDMSink failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load AppleSMBusPCI.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleSMBusPCI failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load AppleHDAController.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleHDAController failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load AppleSMCLMU.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleSMCLMU failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load IOFireWireIP.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Can't load ATIRadeonX3000.kext - ineligible during safe boot.
    Apr 29 08:00:49 *********-iMac com.apple.kextd[9]: Load com.apple.ATIRadeonX3000 failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load AudioIPCDriver.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AudioIPCDriver failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load AppleIntelHD3000Graphics.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleIntelHD3000Graphics failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load ATIRadeonX3000.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.ATIRadeonX3000 failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load AudioIPCDriver.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AudioIPCDriver failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load AppleTyMCEDriver.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleTyMCEDriver failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac configd[14]: network configuration changed.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load AppleUpstreamUserClient.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.driver.AppleUpstreamUserClient failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load IOSurface.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.iokit.IOSurface failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Can't load IOUserEthernet.kext - ineligible during safe boot.
    Apr 29 08:00:50 *********-iMac com.apple.kextd[9]: Load com.apple.iokit.IOUserEthernet failed; removing personalities from kernel.
    Apr 29 08:00:50 *********-iMac loginwindow[35]: Login Window Application Started
    Apr 29 08:00:51 *********-iMac com.apple.SystemStarter[22]: Starting MySQL database server
    Apr 29 08:00:51 *********-iMac mds[32]: (Normal) FMW: FMW 0 0
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd170e07260.anonymous.nohup[145]): Bug: launchd_core_logic.c:9386 (26200):3
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd170e07260.anonymous.nohup[145]): Switching sessions is not allowed in the system Mach bootstrap.
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd170e07260.anonymous.nohup[145]): _vprocmgr_switch_to_session(): kr = 0x44c
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd1720011d0.anonymous.nohup[146]): Bug: launchd_core_logic.c:9386 (26200):0
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd1720011d0.anonymous.nohup[146]): Switching sessions is not allowed in the system Mach bootstrap.
    Apr 29 08:00:51 *********-iMac com.apple.launchd[1] (0x7fd1720011d0.anonymous.nohup[146]): _vprocmgr_switch_to_session(): kr = 0x44c
    Apr 29 08:00:56 *********-iMac XProtectUpdater[18]: Ignoring new signature plist: Not an increase in version
    Apr 29 08:00:56 *********-iMac com.apple.launchd[1] (com.apple.xprotectupdater[18]): Exited with code: 252
    Apr 29 08:00:56 *********-iMac loginwindow[35]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    Apr 29 08:01:01 *********-iMac com.apple.launchctl.LoginWindow[187]: com.apple.findmymacmessenger: Already loaded
    Apr 29 08:01:01 *********-iMac loginwindow[35]: Login Window Started Security Agent
    Apr 29 08:01:02 *********-iMac SecurityAgent[194]: Echo enabled
    Apr 29 08:01:02 *********-iMac UserEventAgent[10]: [10] error in getAndLockContext: open returned -1 (errno=2)  file was /private/var/servermgrd//servermgr_certs.lock
    Apr 29 08:01:02: --- last message repeated 1 time ---
    Apr 29 08:01:02 *********-iMac UserEventAgent[10]: CertsKeychainMonitor: ready to process keychain & timer events
    Apr 29 08:01:05 *********-iMac WindowServer[106]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
    Apr 29 08:01:11 *********-iMac genatsdb[197]: *GENATSDB* FontObjects generated = 639
    Apr 29 08:01:31 *********-iMac SecurityAgent[194]: User info context values set for pureglass
    Apr 29 08:01:33 *********-iMac SecurityAgent[194]: Login Window login proceeding
    Apr 29 08:01:34 *********-iMac loginwindow[35]: Login Window - Returned from Security Agent
    Apr 29 08:01:34 *********-iMac loginwindow[35]: USER_PROCESS: 35 console
    Apr 29 08:01:35 *********-iMac com.apple.launchd.peruser.501[211] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    Apr 29 08:01:35 *********-iMac com.apple.launchctl.Aqua[213]: load: option requires an argument -- D
    Apr 29 08:01:35 *********-iMac com.apple.launchctl.Aqua[213]: usage: launchctl load [-wF] [-D <user|local|network|system|all>] paths...
    Apr 29 08:01:35 *********-iMac UserEventAgent[10]: CaptiveNetworkSupport:CNSServerRegisterUserAgent:187 new user agent port: 35079
    Apr 29 08:01:36 *********-iMac mds[32]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputerIndexed"
    Apr 29 08:01:36 *********-iMac com.apple.launchd.peruser.501[211] (com.apple.launchctl.Aqua[213]): Exited with code: 1
    Apr 29 08:01:41 *********-iMac com.apple.launchd.peruser.501[211] (com.apple.mrt.uiagent[225]): Exited with code: 255
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: 2013-04-29 08:01:44.497 com.apple.dock.extra[241:1a07] Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: 2013-04-29 08:01:44.499 com.apple.dock.extra[241:1a07] Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: 2013-04-29 08:01:44.500 com.apple.dock.extra[241:1a07] Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:44 *********-iMac com.apple.dock.extra[241]: 2013-04-29 08:01:44.501 com.apple.dock.extra[241:1a07] Could not connect the action buttonPressed: to target of class NSApplication
    Apr 29 08:01:50 *********-iMac SystemUIServer[234]: Could not load menu extra NSBundle </System/Library/CoreServices/Menu Extras/Volume.menu> (not yet loaded) for Class AppleVolumeExtra
    Apr 29 08:01:58 *********-iMac mds[32]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    Apr 29 08:02:39 *********-iMac mds[32]: (Warning) Server: No stores registered for metascope "kMDQueryScopeComputer"
    Apr 29 08:03:09: --- last message repeated 7 times ---

  • Battery low warning came on,took battery out and reloaded,r​an 5 minutes and stopped again

    5

    Hi, 
    This is posted in the recovery forum, were you attempting to run a system recovery?  During the recovery you must have the battery and AC adapter in.

Maybe you are looking for

  • Enlarging page and print on screen

    Monitor: HP w2338h   Computer:  MiniMac Model #1283 1.  How can I enlarge the print on the monitor? 2.  How can I spread out the page on the monitor, especially horizontally? 3.  What would be the best resolution to set the monitor? Thanks.

  • How to add or delete rows in tablecontrol?

    Hi, I am using a tablecontrol to enter data records. I want to use 2 buttons, one to insert a row into a tablecontrol and another to delete a selected row of a tablecontrol. How do I insert or delete rows of a tablecontrol? Thanks.

  • Transfering music from itunes to zen mi

    Hello, Can anyone tell me how I can transfer music files downloaded from the iTunes website to the zen micro. Is there some firmware that has to be loaded to do this? Thanks, bmorris

  • Exp error in 9i

    I'm using Oracle9i Ent Ed(9.2.0.7) Export Release 9.2.0.7 Windows Server 2003 I just want to export one table, the following error were encountered on all tables. The export file were produced but I think it's erroneous because export terminated unsu

  • SCE variance vs CO-PA

    Hi Gurus, Should system anything post to CO-PA when we update the price thru SCE? In GL the are postings to UMB. What about CO-PA, should anything go to CO-PA? If so, where to set this? Thanks g