Hp g62 doesn't respond after bios update

after buying this laptop brand new, i installed windows and drivers, and after all was settled i went to do the bios update, using the recommended tools on the hp page. as millions times before, i followed the instructions, the update process completed itself, and the laptop went to shut down / reset. however, nothing happened, and the power led and the wireless led were on, the fan was working, but the screen was blank.
i tried to turn it on again, and every time i turn it on the fan starts to work really loud for 15 seconds. during that time i can turn of the laptop just by pressing the power button. during these 15 seconds the wireless LED is orange (off). after that, the fan calms down to normal levels, and the wireless LED is blue (on). when this happens i can only turn off the laptop by holding the power button.
i tried the hard reset, and it didn't help. what else can i do? it's a brand new laptop, but i don't know will the warranty work in this scenario? those are HP tools i used, from their site and they caused this

Disconnect all peripherals from the laptop. (external drives, mice or other devices)
Remove AC power, remove the main battery, locate and then remove the RTC coin cell battery for 15 minutes. RTC battery is located in the memory module bay on this model, L shaped cover with 2 screws, you will need to remove the main battery before removing this cover.
Put the coin cell back in and connect AC power only, see if it will post the HP screen, if it does Immediately use F10 to enter the bios and set the date and time, save changes on exit.
If it does not start, power it back down, hold all 4 arrow keys down and power it up while holding keys for 2~3 seconds after power up, let up on the keys and wait (2~3 minutes) to see if the bios recovers. If you get the HP post screen, enter the bios and set the date and time before booting into windows.
Your service guide
http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf

Similar Messages

Satellite A50 doesn't function after BIOS update

Hi All,
I tried flashing my BIOS through windows as recommended on my Laptop Manufacturer (Toshiba) website. I guess the process went wrong as after 2 hours still the message "Do not interrupt" was getting displayed. I had to force power off my PC. Now it is not booting up.
The Laptio is Toshiba SA50-114, Satellite series.Model No - PSA50E
I have tried suggestions in following link
http://askiris.toshiba.com/ToshibaSu...200%2035586212
However, this did not work.
However, I don't have the recovery disk tool and BIOS/ROM file. Have tried searching on internet, but with no results.
Can someone please help me with
1. How can I perform the BIOS update to get my PC running back.
2. Point me to links where I can find the files in the above link.
Many Thanks in advance.
Best Regards,
Parag

> 1. How can I perform the BIOS update to get my PC running back.
Not possible if your BIOS ROM module was wrong flashed.
If you are a lucky man then only the ROM module must be flashed again using an special procedure. But this can be done only by an authorized service provider in your country.
> 2. Point me to links where I can find the files in the above link.
There is no link! You will have to ask the ASP for the help.
Bye

X121e doesn't boot after BIOS update

Hello everybody,
I am experiencing following problem with my Lenovo X121e Laptop.
After suffering problems with the Fn-keys on my Laptop, I yesterday decided to give it a shot and upgrade my BIOS for 1.06 to 1.11. I downloaded the BIOS update package from the Lenovo website and startet flashing using WinFlash. Flash progress went fine, ending in the WinFlash shutting down and innitiating a reboot. After Windows had shut down, the Display remained black, not giving me a chance even to reach the BIOS.
I have already tried to start up the Laptop without AC and battery pack, but no change. Even tried to hold the power button for about 60 seconds when having the Laptop disconnected from AC and battery, nothing.
Can anybody tell me what happend to my X121e and how I can get it working again ? Or is it a case for warranty now ? I
Thanks for helpful answers in advance.

http://gluek.info/wiki/hardware/howto-enter-bios-hotkeys
You probably already tried these.
Dave
Special additional keys for USB boot:
Press SHIFT-u to force USB 1.1
Press CTRL-u to wait for a keypress before starting the operating system. When a drive was found, then you can press "s" to skip the device or you can boot from the drive.
Press ALT-u to wait for a keypress before detecting the usb device type. When a device was found, then you can press "s" to skip the device or you can boot from the device when its as mass storage device.
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Satellite L40 (PSL48E) - Doesn't reboot after BIOS update

Hi,
My problem is that I update the BIOS and after that the machine does not restart. ( BIOS corrupt ? )
After the BIOS update (Satellite L40 PSL48E) the machine reboot and with the F2 key I open the BIOS setup.
I check the BIOS version ( 5.50 ) and exit the BIOS setup.The machine must be reboot now.....
No Way, the machine does not restart . No screen only the powerled lights-up.
Is there anything I can to fix it on my own like a BIOS reset ?
Thank you for cooperation.

This is strange because after the BIOS update you could go into the BIOS.
However, try to remove the battery and AC/DC adaptor. Wait one hour and then put the battery in and connect the AC/DC adaptor. Try it again.
If it doesnt work there is something wrong with the BIOS or hardware and should be checked by a notebook technician.

Re: Satellite A200-1AX doesn't boot after BIOS update

Hello all!
I wanted to install XP on a Satellite A200-1AX.
So I tried to update the Bios to the version that supports XP.
When I tried to install it, Vista crashed and now the laptop won't even turn on.
When I keep the power button pressed, the fan wheezes but nothing else happens.
I think the BIOS is gone or corrupted.
What do I do?
Thanks in advance for any help!

> When I keep the power button pressed, the fan wheezes but nothing else happens. I think the BIOS is gone or corrupted. What do I do?
What to say buddy. Looks like something went wrong during the BIOS update procedure Possibly the BIOS was not written correctly and the ROM module must be flashed again using a special procedure and tool.
In such case you can do nothing you have to contact the ASP in your country for a fix!!!
Dont waste a time and ask an authorized service technician for a help.
Good luck and best regards

Satellite A100 - Windows and BIOS doesn't start after BIOS update

Hello, I have updatet BIOS of my notebook sattelite A100.
After updating I cannot start my notebook and BIOS doesn't start.

Hey guys... I tried to update my girlfriend's BIOS on a A100 just now (the windows installer) and the procedure stoped in the middle because windows crashed while doing. Now the laptop won't start at all (obviously). I have a black screen when turning it on. No boot sounds or anything. I've already removed the AC power source and battery in case that works. I guess removing the BIOS battery won't help either since the flashing was wrong... In case that doesn't work, is there any chance i could find a BIOS from ebay or somewhere else?
Thx in advance, Jimmy..
PS. My gf is going to shoot my brains out :P

Comp doesn't boot after bios update

I flashed the new 1.90 bios using winflash on my K8N Neo2 Platinum, after the reboot my comp screen didn't turn on and ventilators stayed at max rpm.
I tried clearing CMOS (i know it can't do anything but it's worth trying) and using another stick of ram (PC4000 on hynix chips that can do cl3, my BH5 doesn't boot on cl 3)
but nothing helped.
Is there a way of reverting to the older BIOS?

Well it's hard to flash back to an earlier bios if your system don't post .
What you can do is to shut off system , remove +5vsby by turning off PSU .
Then remove all devices except the neccesary cpu/memory/gfx card/floppy drive (specially disconnect all USB ,including usb mouse/usb kb )
After having it barebone , reset cmos with the jumper (min 15.secs to be sure) .
Connect the power and see if it posts with a normal PS2 keyboard and no mouse.
If it does you can flash back with a msdos bootable floppy with awfl833d.exe and the bios file on it .

Power button orange light doesn't work after BIOS update on MSI 2A9C

Hi,
I have updated my system BIOS (downloaded from HP web site), the computer works I can enter into BIOS setting.
PC: HP Pavillion p6716it-m
OS: Windows 7 Home Premium
Old BIOS version: 6.16
Mainboard: MSI 2A9C (from CPU-Z)
Data from new BIOS main page:
BIOS revision: 6.18 01/05/12
Core version: 08.00.15
When I put the computer into sleep mode with the old BIOS the power button became orange, now with the new BIOS it is off. In the BIOS setting I have noticed that if I go to: "main -> SYSTEM IDs" the renderig stage is not perfect, at regular intervals some strange artifacts has shown. It seems like when you draw on a window some GUI components without using double buffering.
After update I realized that the new BIOS in the HP web site is for mainboard: MS-7613. It is equivalent to mine? Thanks.

Sorry we support retail msi products only: https://forum-en.msi.com/index.php?topic=110544.0
topic locked.

HP G62-a22se not booting after bios update

Yesterday, i downloaded an update from HP's site for my bios and since my laptop is not booting. on reboot i see the caps lock flashing twice each 2 secs. is there anything i can do to reflash bios or undo the update?? any help would be appreciated.

Disconnect all peripherals from the laptop. (external drives, mice or other devices)
Remove AC power, remove the main battery, locate and then remove the RTC coin cell battery for 15 minutes. RTC battery is located in the memory module bay on this model, L shaped cover with 2 screws, you will need to remove the main battery before removing this cover.
Put the coin cell back in and connect AC power only, see if it will post the HP screen, if it does Immediately use F10 to enter the bios and set the date and time, save changes on exit.
If it does not start, power it back down, hold all 4 arrow keys down and power it up while holding keys for 2~3 seconds after power up, let up on the keys and wait (2~3 minutes) to see if the bios recovers. If you get the HP post screen, enter the bios and set the date and time before booting into windows.
Your service guide
http://h10032.www1.hp.com/ctg/Manual/c02542102.pdf

Right shift key doesn't work after BIOS update on Satellite A200-28P

For some reason, after I upgraded my Bios, my right shift key doesnt work and neither does my FOUR and SIX button, hence why i have written in words :(,
I tried reinstalling windows, hasnt made a difference.
I tried rolling back the drivers for the keyboard, as well as changing to the US version of the keyboard, nothing has helped.
Thanks

okay first problem is, my warranty was due to expire, so i brought an extension, and nothing has happened whatsoever on those regards, secondly, i ran a keyboard test, and i found out that it wasnt only the four six and right shift key which was now no longer working, but also the f2, f10, f11, f12,
I have used a external keyboard, which works :D but it annoying to use that when the whole point of a laptop is to have the inbuilt keyboard,
any suggestions on this

Programs not responding after BIOS update

I have an HP Envy 15 Touch Smart notebook, less than 6 months old, running Windows 8.1. Since automatically updating the BIOS (per HP Support Assistant recommendation) a week ago, performance has collasped. Machine boots up OK, but then programs either fail to start, or go into endless wait mode. Response lag may be 20 minutes or more for any command. Can anyone help me understand what is going on? Many thanks in anticipation.

There are two possible erros on a computer, hardware or software.
with these issues you're having the software part if it's a softwre issue, is windows in general.
To test if it's software related, I'd suggest either using the microsoft system recovery to try and take the computer back to a date before these errors started occuring.
If you wnt to test for hardware issues instead, you can when you power on your computer, press the F2 key multiple times.
You will then go to hardware diagnostics where you can test the various components of your computer.
My first suggestions would be the harddrive/harddisk and the memory test.
Run the extensive tests and see if they fail.
If they fail you know it's hardware related, if they pass, it's software related and you'll have to try the reinstall of windows.
AlHaste - HP Notebook Technician
Were I able to help you? Please say thanks by clicking on the purple thumbs up icon over to the left
Did I solve your issue? If so, Please mark Accept As Solution to the right

After BIOS update Satellite L350-172 doesn't start anymore

Satellite L350-172 Bios-Update from bios-20090203164614 to bios-201002250
I just updatet the BIOS of my notebook from 1.60 to 2,20. Now the Notebook doesn't start any longer.
"It was stopped for reason not to damage the Computer" - blue schreen.
How can I downgrade the bios again? Or - what have I to change in the bios-settings?

Hi schuwe,
Im a little bit confused about your posting. How do you tell your BIOS not to restart?
Anyway, after BIOS update you should load the default settings in BIOS.
Did you choose the right BIOS especially for your model?

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My Qosmio F10 is dead after Bios Update

My Qosmio F10 is dead after BIOS update ... it doesn't work anymore .. i update the bios from 1.10 to 1.20
the switch Led is always orange...
what can i do to make it work again ? or return the 1.10 version?

Hi
You can check many postings in this forum about the BIOS upgrade procedure.
Mostly the users damage the notebook because of wrong BIOS or wrong BIOS procedure.
If the notebook is dead after this procedure so it could be a damage motherboard.
In this case only the Toshiba service partner can solve this issue. ;(

Safari doesn't open after i updated it to 1.6.8

Safari doesn't open after i updated it to 1.6.8

Reinstall Safari 5.1.2
Then restart your Mac.
If that doesn't help, you may have a third party add on that was compatible with the prior version of Snow Leopard, but not 10.6.8.
Troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And try Safari in another user account. If you can't open Safari there as well, that's an indication the startup disk may need repairing.
Log back in to your admin account, launch Disk Utility. That's located in /Applications/Utilities
Select the startup disk on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
Help for repairing the disk if necessary here > Using Disk Utility to verify or repair disks

Hp g62 doesn't respond after bios update

Similar Messages

Maybe you are looking for