Hp g70-467cl: the ts-l633m DVD gives a code 39 error, I need a replacement driver to correct this

I have a HP G70-467CL Notebook PC Computer and I'm getting a (Code 39) error on the TSST corp CDDVDW TS-L633M ATA Device I'm running Windows Vista 64-bit Operating System the error says it is missing or has a corrupted driver issue. and when I checked for a solution nothing came up. Can anyone help me obtain the correct needed device driver? the only device drivers I could locate were for sound, display, chipset, modem, and LAN. I have already exhausted the available troubleshooters onsite HP and Microsoft. Thank you all.

Have you ran "Windows Update"? It can sometimes locate drivers for the hardware that is installed. If that doesn't work for you, let me know and I will see if I can find anything for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes?

I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!

You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own."

When i try to download apps from the app store it gives me an error message help!!

when i try to download apps from the app store it gives me an error message help!!

Well this is my first time using the support community so I didn't know how it worked. It was giving me the error message 1004. I figured it out though thanks.

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

I cannot connect to an update for windows for adobe premiere elements 9 ar to change my sign-in. it gives me an error message 400 saying photo shop is unavailable. this makes the second day.

This is a user to user forum, not Adobe support
Select a topic, then click I STILL NEED HELP to start Premiere Elements Online chat
-http://helpx.adobe.com/contact.html?step=PRE

My Powerbook boots up every few times and the hardware test still gives me -9972 error

René O'Deay wrote:
My Powerbook G4 15" aluminum 1.67Ghz 10.3.9 Panther won't start up.
(I did a backup on an external drive not long before it failed)
have gotten lost in my research on apple forums and knowledge base.
From the original install discs:
The Hardware test gives the error.
"2STF/8/3 ATA-100 ata-6-Master (-9972)"
The Disc utility does see my harddrive but fails to repair with the messge:
1 volume cannot be repaired,
'Invalid node Structure'
Disk 'no valid packets (-9997)'
I do have a useless partition from TechTool 4 and had successfully run the programs just before Powerbook failed.
aid everything was ok, with no warnings.
found somewhere a link to a hardware test code list, that said 9972 could be the cable (ribbon?) to the drive needed to be reset, replaced, or the harddrive replaced.
our local New Orleans 'official' Apple Tech guy calimed it was the harddrive and not worth replacing. he whined that it would take hours, tho the guys on ifixit claimed only half an hour.
i have since got a refurb MacBook (even older it turns out) with Tiger, but I miss my 15 incher Powerbook. (on very tight budget)
the battery got zapped by lightning last year and have struggled with it ever since. it won't fully recharge.
Right now have got it on the AC without the battery to try to charge the backup battery.
I have managed to restore it several times after crashing, inspite of my tech guy claiming otherwise. but have never really opened it up besides just looking at the memory slots. just one filled with 512 card.
so any advice, or suggestions.
I've been messing with my Power book for like 10 hours and finally finished replacing the hard drive. (just installing the software and all the updates took almost 2 hours by itself) Now it boots up every few times and the hardware test still gives me -9972 error.
<Re-Titled By Host>

My friend. Do not despair.
Firstly, you have a backup. Kudos.
Secondly, i suspect the hard drive in the machine is more than just a few years old. Hard drives die. I suspect the hard drive is the issue, not the cable.
Thirdly, it is worth changing the hard drive and take the ifixit advice. Simple to change. If it will be your first time changing the hard drive, just be organized and follow the steps carefully.
Now, before we decided it is the hard drive we need to confirm this.
I would check if SMART reports favorable conditions for the drive. Disk utility can tell you.
If good then I would zero out the drive. This allows the drive to excercise every sector and will build confidence of a well prepared drive going forward.
You can then restore from backup.
The other option is to replace the internal HD with a new one, perhaps with more storage.
As an FYI, I replaced the drive on my powerbook G3 and it's faster, quite , has more storage and gives me some peace of mind. Worth the money. The little guy runs beautifully.
Sent from my iPhone

I rented a movie about 45 mins ago. It stopped downlaoding at 20 mins of the movie. It gives me an error message and wont finish downloading.

I rented a movie about 45 mins ago. It stopped downlaoding at 20 mins of the movie. It gives me an error message and wont finish downloading.

It gives me an error message and wont finish downloading.
What does the error message say? Include error message numbers if you're getting any, please.

HT1199 My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Plz help
My mac won't boot up it goes to a apple sign then the spin thing then gives me a error msg on a 10.5.8 imac what do I do?

Hi LIsa,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Or..
Tough without the Install Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
The volume (name_of_volume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
***** FILE SYSTEM WAS MODIFIED *****
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.

HT201197 how do i fix this (the share operation DVD has failed Quicktime error 0

Ho w do i fix this - The share operation DVD has failed Quicktime error 0

Select a short section of your project and export as a Pro Res master file.
If that also fails, turn off BG Rendering; delete project render files; copy the entire Timeline to a new project.
Russ

With the latest update of iTunes the download quits and gives me and error code of 2324

With the latest update of iTunes the download quits and gives me and error code of 2324. what do I do now? As iTunes wont open up.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

HT5622 Hello, I try to register an apple id and i receive the verification email. But when i try to acces the verification link, browser give me a msg with sorry, .... Why this?

please help

Hello, I try to register an apple id and i receive the verification email. But when i try to acces the verification link, browser give me a msg with sorry, .... Why this?

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project: - There appears to be a broken asset in your project. Correct this problem before burning this project."

It means that iDVD has found a problem with one of the movies added to the project. Did you edit the movie after it had been added to the project.
Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

HT5625 My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716)

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?

I upgraded iTunes to 11. I now receive an error message which reads - 'The iTunes Library file cannot be saved. An unknown error occurred (-50). How do I correct this error?
Thanks
TDB

I know this doesn't help you Bud, but I've had this issue for at least the last couple of versions. If I can ask, what is you enviornment like? Local PC only, libray saved on another PC/Server?
In my case my library is on Windows 2003 server with the share mapped to drive M: This has worked for many years through both XP and Windows 7 until and update a while ago.
Thanks,
Rob

TS3173 i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select your OS X disk.
5. Click on the arrow button below the icon.

Hp g70-467cl: the ts-l633m DVD gives a code 39 error, I need a replacement driver to correct this

Similar Messages

Maybe you are looking for