Hp g72 b60us LED replacement?

anybody here knows where can i buy a new cheap LED for my laptop? i really need it ASAP.

Hi,
Please use the following link to find part # then eBay:
   http://h20141.www2.hp.com/hpparts/?cc=US&lang=EN&jumpid=hpr_r1002_usen
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Hp g72 b60us keyboard

    I have purchased a replacement keyboard for my hp G72 b60us laptop and need instructions on how to install it.

    Hi,
    Please use the following manual  (from page #54) :
      http://h10032.www1.hp.com/ctg/Manual/c02623152.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • G72-B60US

    Is there a good replacement wireless network card that fits into my HP G72-B60US laptop.  The Broadcom 4313GN wireless card that came with it will only do 72Mbps tops.  If I plug in a Netgear A6200 USB adapter, the speed goes up to 144Mbps.  I'd like to replace the Broadcom card with an Intel AC network adapter if possible.  I am purchasing a Dual Band router to replace my present Dlink router that has only 100Mbps capacity.  
    This question was solved.
    View Solution.

    Tommy.
    Your manual here.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?product=4308442&cc=us&dlc=en&lc=en
    Up to 300Mps.
    http://www.ebay.com/itm/HP-Compaq-593530-001-Intel-WIFI-1000-112BNHMW-WIRELESS-300Mbps-MINI-PCI-E-CA...
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Notebook G72-B60US

    I have a notebook computer G72-B60US my computer crashed 3 nights ago when i let a Norton technician into my computer via-Internet. Due to the fact my anti-virus would not pull up the technician erased some files on my computer. my computer restarted -4 times during this process just fine then the final erasing of files my computer would not start back up.  I tried everything i knew how to do and nothing would work. I took my computer to Office Depot where I bought it at for them to get everything off of my hard drive so i did not lose anything. I ordered the "System Recovery DVD Window 7 Recovery Media for Window 7 Products" I just recieved it today and I  am trying to load it back onto my computer and followed all the directions I know it will take longer than an hour to complete the whole process. But it keeps sticking on 12% and I do not know what to do. i tried to restart my computer and it said system reboot failed press ctrl+alt+del. I did that and the same message reappeared. It is like  system start up/ booting file isn't there. I am at a lose for words now i just bought the computer on febuary 23, 2011 so it is not that old. But go figure my older laptop has never failed me and I have had it since 2005. Please Please someone help me I really need it right now.

    I would almost have to be there to see this, but typically, if you boot from the dvd (it seems you've already accomplished this) it'll do a factory restore on the already active partitions.
    I would try to hit the F12 key while your computer is booting, most HP's have the f12 key mapped to the recovery partition, so see if that does anything worthwhile for you. 
    Sorry I can't give a straight answer without seeing the PC in action.

  • Broken G72-B60US AC jack fix

    I have a G72-B6OUS notebook with an ac jack that has broken an anchor pin internally. It still functions but is getting looser with each charging cycle. I'm wondering if anyone has ever tried a 90 degree connector to swing the ac input away from the side of the notebook. As I see it, one fatal flaw the G72 has is the placement of the ac jack, every time it's tugged on the jack gets a little looser. Eventually the jack shorts out and burns the motherboard. 

    Hi
    Please try to update the Bios & Chipset driver on the unit also trythe step given below incase both does not resolve your issue please check the warranty status and call HP Technical support to replace the System Board.
    Try this:
    Disconnect AC
    Shutdown
    Remove battery
    Connect AC
    Startup
    Open Device Manager
    Click the plus (+) sign next to Batteries category, right-click All of the "Microsoft ACPI Compliant Control Method Battery" listings, and select Uninstall In the "Confirm Device Uninstall" dialog box, click OK. (it’s ok if you only have 1 of these listings).
    Click the plus (+) sign next to System Devices.
    Right-click the “ACPI Fixed Features Button" and select Uninstall. In the "Confirm Device Uninstall" dialog box, click OK.
    Shutdown
    Disconnect AC
    Insert battery
    Connect AC
    Startup
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HP Dv7T-4100 LCD (LED) Replacement

    Want to share my problem right now.
    I broke the LCD of my HP Dv7T-4100 Laptop last june and now im having a hard time to find a LCD that will work the same as mine. Problem is that HP here at the Philippines doesnt support this kind of problem only if im going to bring this back to california where my uncle bought it.
    I found a Computer Service here but when we managed to replaced my Laptop LCD there's a green dots on the whole screen (we dont know what is that.). We tried to use 16 inch LCD and i'm suprised that it is working (but i didnt bought it of course) .
    I saw seller at ebay.com.ph and says "We do have the compatible part in stock for your model. B173RW01-V0"
    heres the link :  ebay lcd
    Can somebody give me idea on how can i make sure that if i bought a new lcd it will work as same as my old one?

    You can find service manual of your laptop here which has list of all compatible parts for your laptop
    http://h10032.www1.hp.com/ctg/Manual/c02666747.pdf
    Kindly check Pag#28 which has info regards to your LCD screen
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • 24 inch LED Replacing Stand

    Hey. I detached the stand from my 24" LED display for travel purposes - all fine. Re-attaching the stand is another story. Upon re-screwing the stand to the rear, I can't get the stand to slip into it's 'home' position. Anyone have any ideas? Thanks!

    I doubt reinstalling the OS will fix your problem but that's you choice. 
    FWIW I found the following 6-page thread which may be a similar problem to yours but you will have to search through it for relavance or ideas (I didn't read it):
    24 inch LED cinema Display momentarily goes black

  • Have HP G72-B60us with Core i3 370M Notebook and Socket PGA988 ; will Core i5-580M same socket work?

    a Core i5-580 has same socket but runs at 266speed compared to my i3-370 of 2.4 speed   I think the motherboard is a
    HP 1439  60.3E with Bios F35

    Look on page 83 or your service guide and the  i5-580M is listed. I believe that all the first generation "i" series processors have the same socket.
     http://h10032.www1.hp.com/ctg/Manual/c02623152.pdf
     I suggest using IC Diamond thermal compound, it's very easy to apply.
     You are not going to notice that much difference in performance, installing a solid state drive will make a noticeable improvement.

  • G72 charge discharges

    My G72 B60US- about 2 yrs old, starts to discharge with the charger plugged in, if I move the plug-in around in the port it starts to charge but then goes back to discharging again. The orange light stops lighting meaning its operating on battery. This seems to happen every few months, then stop acting up for awhile. IT will charge (orange light on) for an hrs trhen goes back to operating on battery.

    You need the jack replaced on the motherboard,loosing connection.

  • Where can I purchase a LED screen for my 13" MacBook Pro?

    My 2009, 13" MacBook Pro screen needs to be replaced. It fades to white minutes after I boot up. Apple charges over $400 to replace a screen. Or they will outsource the replacement for $250. I have been repairing all my computers for years. I don't want to pay out a bunch of money for something I can do myself.  I can't seem to find a reputable dealer who sells the correct LED replacement screens for my Laptop. Will somebody here give me the names of places where I can buy a screen? Thanks in advance for your help.

    See either...
    http://www.ifixit.com/MacBook-Parts/13-Inch-Unibody-LCD-Panel/IF163-024
    ...or...
    http://www.ifixit.com/MacBook-Parts/MacBook-Unibody-Model-No-A1278-Display-Assem bly/IF160-002.
    Depending on your actual needs...
    Good luck,
    Clinton

  • LED-alternative for 24-inch cinema display?

    With my month-old Mac Pro 8-core, I cannot use a 24-inch LED Cinema Display, because the Mac does not have a mini display port. No matter how much I would like to buy the LED-display, I'm not willing to invest an extra 315,- euro's to get a new (noisier) graphics card with mini display port to replace my GeForce 8800GT. Does anyone know a good LED-replacement for the 24-inch Apple display? It has to be an IPS-type panel, not TN.

    Hello, Ertjie.
    The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today.  Click the "Download" link I post here or try the one in the kb article again.  Perhaps it will work for you now?
    However, I note that the kb article expressly states that this firmware update: 
    ...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
    If your Mac is really using Mac OS X (10.6.8)  as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled.   If so, contact Apple or your Apple-Authorized Service Provider for help.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • Re: MSI X99S GAMING 9 ACK Power LED Issue

    Thanks Chike for the info,BTW can i find replacement power/led switch board also for Thermaltake core v1 ?

    http://www.ebay.com/itm/2ft-PC-ATX-Reset-Off-On-Switch-HDD-Power-LED-Cable-Front-Panel-Replacement-Wire-/261950581937
    But does not ship to usa
    Just Google or search eBay for atx power led replacement.

  • Unable to print to a network printer, HP LaserJet 4000n

    After much frustrating going in circles, I finally installed the software for my network printer, an HP LaserJet 4000n, otherwise idetified on my 4 other PCs as HP LaserJet 4000 PCL 6.  It works well on the others, including an HP Netbook with Windows 7 Starter.  
    I finally got the printer to show up as HP Universal Printing PCL 6.  I can set the Properties from my wife's new HP G72-B60US, running Windows 7 Home Premium (64 Bit).  I can click on "Print Test Page,"  and I get the message that it was sent to the printer.  However, it doesn't print.  I get an "Error - Printing" message.  I tried using the Windows assistant, but couldn't get any results.

    Downloaded Microsoft_Fixit  Mats_Run.printing.exe  from: http//download.microsoft.com    
    Microsoft Automated Troubleshooting Services Setup
    Checking network printer connectivity
    Printer HP Universal Printing PCL6 cannot be contacted over the network
    Reinstalled printer as HP LaserJet 4000 PCL 6.  Printer HP LaserJet 4000 PCL6 cannot be contacted over the network
    Contact your network administrator
    Windows could no fix the problem.  Please contact your network administrator.
    Tied:    http://support.microsoft.com/kb/980871                  Workaround:
    To work around this issue, you can click to clear the Render print jobs on client computers check box on the Sharing tab of the Printer Properties dialog box for the printer.
    I posted on a Microsoft forum, and received a reply from an MS tech.  Tried all his suggestions to no avail.  My printer is attached to a desktop PC running Windows XP Professional.  Do I need to install some kind of Windows 7 driver on the server?

  • Recording Problem with Windows 8 and Itunes 11

    I have Windows 8 on my HP G72-B60US laptop. I also have downloaded Itunes 11, I cannot burn music to a disc. Any help would be appreciated.

    Sync it the same way any other iDevice would be synced on any other version of iTunes running on Windows or a Mac.
    Plug it in.
    Select the content desired to sync.
    Sync.

  • The Illuminated lights on my keyboard no longer work

    I just noticed last night that my Mac Book Pro's Illuminated keyboard lights no longer work. They used to work without any problems but now they don't. I don't use this feature often, so I don't know how long the problem has been occuring. I only just noticed it last night.
    I tried resetting the PRAM and the power management, to no avail. The "Illuminate keyboard in low-light settings" button is checked in system preferences.
    The strange thing is, I can press the keyboard light controllers on the keyboard and the indicator of the light level appears on the screen, but the lights don't actually come on.
    The ambient light settings for the display are working fine. I don't understand what's going on with the keyboard lights. It's very irritant.
    My Macbook Pro is one of June 2007's models, the Santa Rosa 15", 2.4 GHz Intel Core 2 Duo. It came with Tiger and I upgraded to Leopard in December. Last week I upgraded to 10.5.3. Thanks in advance for any help!

    Yes, as I said in my first post, that box is toggled. It still doesn't work. I've tried turning it off and back on and it still doesn't work.
    I haven't even had this computer for a year yet already it's breaking down. 3 months after I bought I had to have the LED replaced because it was defective, and now this.
    Why is this professional laptop that costs as much as it does breaking down after barely a year? I never had these problems with my IBM ThinkPad laptop. I only needed to take it in for support after 4 years of solid performance.
    I don't expect to see these problems in a supposedly professional computer that is barely a year old.
    Oh well.
    Message was edited by: orbit82
    null

Maybe you are looking for