HP GPU Driver Software

Hello I have an HP dv6 notebook with an ATI mobility Radeon HD 5650 GPU. I have been told that I ahve to contact HP to obtain new driver software for my GPU and was wondering how I can obtain that.

Hello Shane - Actually what you've suggested I've already tried, without success. There is the possibility of course that I'm doing something completely stupid, however I don't currently know where the stupid point is.
But I followed your advice - the computer is connected to LAN port #1 on the router via an Ethernet cable; likewise the printer, which is powered up, is connected to the router via Lan port #3; no other devices occupying ports #2 & #4.
Print & Scan pane open > + button selected > Add Printer Pane opens, nothing there under the Default printer button, likewise when the IP button is selected: Protocol choices are LIne Printer Daemon - LPD, Internet Printing Protocol IPP, HP Jet Direct socket - no IP address in any of them, no Name, no Location.
If I select 'Print Using" and choose HP Laserjet from the Printer list then enter the router's IP address 192.168.1.254, I get a message in that "The selected printer sofware isn't from the manufacturer and may not let you use all the features of your printer." If I select Add anyway, I get another pop-up message "Unable to verify the printer on your network; it cannot currently be determined if 192.168.1.254 supports Internet Printing Protocol. Would you still like to create the queue?" Yes.The printer, now titled 192.168.1.254 now shows up in the Print & Scan window. if I try to print a document, a print queue is created alongside the message "The printer is busy' and of course it doesn't print anything.
If I do this again and enter instead the Ethernet IP address, same sequence of alerts occurs, but when I try to print something a pop-up message says "Printer's URL is incorrect."
Is there a wrong step in here somewhere Shane? I'm sure the solution is nearby, but I'm a blind man groping in the dark.
Regards
Alex

Similar Messages

Windows vista, Ipod shuffle 4th gen. Computer cannot find device driver software for ipod.

After several hours trying the troubleshooting options provided by the apple support site, I have come to what I think is the issue here. My girlfriend recently got an ipod shuffle and when plugging it into her computer the dialog pops up saying it is installing device driver software for the ipod. Eventually it asks me to insert the CD that came with the ipod. No CD came with the ipod, so I click the option that says "I do not have my cd". Then it gives me the option of searching automatically or manually for the driver software. The automatic way can't find it. Doing it manually, with the help of the troubleshooting page, didn't work either. google search can't seem to help me on this one. Also, I tried plugging the ipod into my computer (not hers) and it worked fine, it was able to install the device driver software on its own. Does anybody know the issue here? My computer has windows 7, and hers has vista. Hers is Serice Pack 1. When I tried installing service pack 2 it wouldnt work. I don't know if that is the issue though. I have tried just about everything, I think the issue is finding the device driver software. When I do a google search nothing comes up, so I have no idea what to do at this point. Any help would be appreciated, thanks.

Well its surprising to know that! But even have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .

Cannot find the driver software for my printer hp 1515

First i found it..but then i realized that it for hp 1510 printer,so i had stopped the download. but then, itry again to download but it not show the dowload for software, it only show the utility download. what should i do? i need the driver software because i'm using netbook that there's no place for cd driver to install.i want to use my printer but can't because not install yet.where can i find the driver software download?

Hello,
If your PC works on Windows 7 / 8 or 8.1, then please download and run the HP Print and Scan Doctor from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

New laptop can't find the driver software for my ipod. What should I do?

Previously I've used a family member's computer to sync their songs onto my iPod. We have very different tastes in music so I was excited to finally get my own songs on here. I now own my own laptop and have installed the most recent iTunes. However, whenever I plug the Ipod in it says "Windows needs to install driver software for your Unknown Device" I click locate and install driver software but it doesn't work and remains an Unknown Device and I can't sync songs. Should I have a CD or something for this? I have a 2nd gen. iPod nano so if I ever did get one it's long gone now...

sheamb wrote:
I have downloaded 10.6 but it says that it is not the next update. Any suggestions?
where did you download 10.6 from? It is only available on a DVD.

How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card

Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;

Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments

How do I reinstall the driver software for my iphone 3gs to my PC?

Hi there,
I accidentally deleted the driver software for my iPhone 3GS and don't know how to get it back.
My computer is a Windows Vista and I can still sync to iTunes and sync music and photos etc. But I want to use internet tethering for an internet connection on my computer which I have done previously. One day I was mucking around with the tethering and I accidentally deleted my iPhone from the computer. I went to reinstall it and and it searched for the driver software which it could not find on my computer, after this it asked for a disc so it could search for the software on that. My phone never came with a disc originally and I didn't have this problem when I first got my iPhone and initially installed it. So I chose the option that I didn't have a disc, the next options are to browse manually or search for another option and both of those failed (I chose a manual locotion on the computer where I thought it might be which was: (C:)/Program Files/Common Files/Apple/Mobile Device Support/Drivers, but this didn't work.) The computer still recognises my phone and all it just needs to install it.
I would be pleased if I could get any sort of reply guys.

Probably only way is to call Applecare in your country and they may tell you who holds the lock. IIRC you IMEI and serial # are required

How can I open a project that has been created with Mercury Playback Engine GPU Acceleration software, on my trial version of Premier Pro CC?

Hi,
I'm working with a colleague who is using Mercury Playback Engine GPU Acceleration software on his PC version of Premier Pro CC. I am using a mac and have a trial version of Premier Pro CC. When I try to open a project file that he has sent me I get an error message-
"Missing renderer: This project was last used with Mercury Playback Engine GPU Acceleration (CUDA), which is either not available or not certified on this system. Mercury Playback Engine Software Only will be used."
When I click OK and locate the files I get a message saying "File format not supported".
Can anyone tell me what to do so that we can share project files?
Many thanks,
Jessie

Shouldn't really be the MPE at fault here ... what is the codec of the footage/sequence/project?
Second, can you create a new project in PrPro, then in the media browser, import that sequence from the other project?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

Can I set up a new Mac Pro late 2013 using a Wacom Cintique 13HD tablet as the default monitor? How would I install the driver software for the tablet?

The wacom site will have the drivers for you.
http://us.wacom.com/en/support/drivers

I have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?

Load the drivers and you should then be able to add it in Print Center.

Install Device Driver Software for Palm TX

My new notebook has Windows Vista and I have had my Palm TX for almost two years. To install the Palm on my notebook I downloaded the version for Vista from Palm.com. When I went to synchronize the Palm with the computer during the installation the message kept coming back that "device driver software" could not be found. Where do I find the driver software? Is it on the original CD that came with the Palm? At this point I don't know what to do. Can someone help me with this problem?
Post relates to: Palm TX

mar008,
When you upgraded to Vista, did you install over the existing XP install on the same PC or get a new computer with Vista?
If you upgraded over the existing install of XP, you may need to do a "clean" uninstall and re-install Palm desktop. You should be able to use the original CD that you got with the TX on the Vista OS.
Not sure why you are getting the 680 message. Did you ever have a Treo 680 or a handheld that is a different model than the TX?
Here are the "clean" uninstall procedure for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Device Driver Software for Zire Z22

I have a Zire Z22 palm unit and am using Windows Vista on a desktop computer. I have loaded the special Palm Desktop Software suggested for Vista. But, when I connect the Palm using the USB cable and hit the hotsync button I get a message that the device driver software must be installed. It tries to search for the needed driver, but doesn't find it, not even on the Palm software disk. Where can I find the device driver software to download so I can hotsync?
Post relates to: Zire

Hi, and welcome to the Palm Community Forums.
There are more than one kind of Vista...32 bit or 64 bit. If your Vista machine is 64 bit, you are limited to syncing via IR (infrared) beaming. Please review the threads "stickied" near the top of the Windows Hotsync board about syncing a Z22 with 64-bit Vista.
If your Vista desktop is 32 bit, you might need to do a clean uninstall and reinstall. Stickies have that information as well.
BTW, I am moving this thread to the Windows Hotsync board.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

IPod Nano 8G - Win7 - Device driver software wat not successfully installed

Hi,
Just got my first Apple iPod Nano 8G (4th) and has installed iTune 9.0.2 (64bit) on my Win 7 Ultimate x64. But I am not able to connect iPod nor Sync with iTune successfully even after reinstall/reboot many times with the same problem.
After the installation of iTune accomplished, I plug USB adapter into PC, then Win7 detected and started to install the driver for the hardware, but got "Device driver software wat not successfully installed" as a result.
Then I went to Device Manager tring to install the driver manually for "Apple iPod USB Driver", but finally I failed again and got "Windows cannot verify the digital signature for the drivers required for this device....", I think this is the software problem, please kindly advise, thanks a lot!

First, my officejet 4500 all-in-one installed and is working perfectly with wireless; however, I have for months still/have been getting the error/uninstall window continuously, telling me install was not successful, but again, printer, scanner, etc., working fine! But this "the installation was not successful" window is ALWAYS up or if I ctrl-alt-del and get it to end now, it comes back up; I have even let it do its thing, finish, restart, but it ALWAYS comes back up, trying to find a solution, etc. BUT MY PRINTER IS WORKING FINE! Please help me get rid of this; also, the file that it puts on desktop to troubleshoot, etc then delete afterward, I have deleted it, but this "unsuccessful" keeps trying to uninstall, reinstall; and as I said, actually went through all the steps to get it gone (printer working fine) but it will not go away! Thanks. ajm

Windows needs to install driver software for your unknown device

Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!

The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567

Driver software for vista having problems

something is wrong with the driver software on my computer im trying to use my new ipod nano 5th generation on my computer that uses windows vista everytime i plug it in though it says that my computer doesnt have the proper driver software to work properly, so i go through the set up and no matter which options i choose( for it to update manually or automaticly or anything) it will not work i installed the latest version of itunes and everything, i searched the apple site and couldnt find anything relating to this topic, so if anyone knows what to do please post or somthin

Try the iPod forum. There is one just for nano, itunes, etc
http://discussions.apple.com/index.jspa?categoryID=1
http://discussions.apple.com/category.jspa?categoryID=150
also there are daily Apple tech notes
http://support.apple.com/kb/index?page=articles

Cannot install driver software for N8-00, Windows ...

I'm having a lot of trouble getting any Nokia software to work on my PC.
(This was the same for my previous Nokia 2730.)
The first time I connected my N8-00 to my PC, running Windows Vista 32, my PC worked out it was an N8-00 and a window appeared asking me to confirm AutoPlay settings - there was a checkbox (which I checked), but no OK button.
I could go to Start > Computer and see the N8-00 there though.
I opened the device and found the Ovi Suite Installer and tried to run that (because the downloaded version didn't work either - I'll start another thread about my troubles with Ovi Suite) but it didn't work.
I then removed the phone from my PC.
Now whenever I connect my phone to my PC Windows tries to install the N8-00 drivers and fails, giving me these messages:
"Found New Hardware - Nokia N8-00"
"Windows encountered a problem installing the driver software for your device
Windows found driver software for your device but encountered an error while attempting to install it.
Nokia N8-00 USB Phone Parent
No such interface supported
If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Obviously not being able to connect my phone to my PC is very frustrating and restricts many of the features I wish to use.
Help in solving this issue would be very greatly appreciated.

Could someone of you resolve the problem about the connection of N8-00 to PC??
I have the same problem and I can't resolve it.
Best regards!!

HP GPU Driver Software

Similar Messages

Maybe you are looking for