HP H8000 Wireless Headset Dongle problem

HP H8000 Wireless Headset Dongle problem
The dongle has stopped working, the blue light which it has generally does not show up anymore.
Eventually the headset is nolonger useful without the dongle working..
Pls help how do I fix this or get a new dongle....

Victor,
Please use this form instead. Let us know if you are still having problems writing in.

Similar Messages

  • H8000 wireless headset

    I did try to email you but couldnt product code or serial number didnt work.
    Purchased H800 wireless headset because I need to use a voice recognition was told this was a good headset. (I now cant use finger to type as it is very painfull.)
    Wernt they wrong! 
    microphone is way to low my settings are on 100% boost!speach keeps cutting out (breaking up)if i try to read the headphones beep at me and turn off!! (3 times in a minute)my headset is 2ft away from the reciever. I have followed info on this forum!!btw personal note this email took me a long time to type!!!I cant take the headset back its not considered faulty! and is out of the 14 day guarentee I thought buying a good well known brand name would produce a good product but guy/gals you failed with this one I think. now I have to go searching for a new headset that doesnt do all of the above, and not cost the earth. please feel free to take this off the forum and contact me privatly. Im not a complainer by nature but this product just isnt upto the quality you would expect. Rosheen x  

    Sorry, i didn't realize that this are actually not operate by HP company. The real issue is that HP doesn't have proper path to handles all the complaints.  Although I do sounds like i found a good HP product specialist, but it cost me 5 visit trip to HP center in a month times, buying a defect unit for K, been send in to factory for nearly 1 month for mouse issue, get exchange from RM100 mouse to RM50 mouse as solution by HP, a RM200 headset that couldn't work at all... Gosh.... now the batteries problem... there are not even an e-mail provided by hp. all you can do is just rise you issues here, and hope that someone can solve your problem, or walk in to HP center, and wait for few months. You can't complaint!!!! there are no pathway for it!!! sorry for been so frustrated... it really do annoyed me a lot...

  • Nokai E71 and PS3 Wireless Headset pairing problem

    hi!
    My PS headset should be good with my E71 Phone,
    but i have no idea, how to pair them!
    I've tried to find answer online, but couldn't.
    Could someone please give me some advice?
    Thx!

    many have talked about its need, I dont know when a software update will enable this
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Soundblaster Rage Wireless headset, strange problem

    i was playing a game when the headset just startet to reboot and continued to reboot when it got connected to the usb stick again, the headset have been stuck in a reboot cycle for the past 24 hours.
    anyone got an ide of what to do?
    tried to update the firmware on the stick but it failed and now the stick is dead.

    Hi danblo88,
    Do you want to try upgrading the firmware again?
    I have found two threads with similar problems, maybe you can try the solutions other users tried. One user tried discharging the headset battery and it worked, the other tried to remove the battery in the headset and put it back and it worked.
    http://forums.creative.com/showthread.php?t=709043
    http://forums.creative.com/showthread.php?t=708216

  • Soundblaster creative tactic3D Rage wireless headset, Having problem charging

    Just bought the headset installed all the software and charged them for the 8 hours.
    Now the USB-chord (the charger) won't connect to the headset when I plug them in.
    The USB is plugged in directly to the computer but as soon as they are plugged to the headset i get this message (USB Device Not Recognized)
    I got w7 if that helps
    EDIT: It helped when i used a USB adapter directly into a power outlet but not into the computor

    Hi Guys,
    You can refer to these forum threads for similar topics:
    Article 1:
    http://forums.creative.com/showthread.php?t=700751
    Article 2:
    http://forums.creative.com/showthread.php?t=702488
    Cheers!
    Philip-CL

  • HP Wireless Headset H8000

    Dear Sir,
    I bought an HP wireless headset h8000.
    1. I can not use it because there is no sound coming (the audio does not work). Nevertheless the speakers work, because there is a sound coming everytime I switch the headset on. The lights blink too. I tried to switch the audio at my laptop from speakers to headset and the laptop says the headset works. When music plays,it even shows that there should come noise from the speakers (of the headset). Do you have any idea why there is still no sound?
    2. I wanted to charge my headset but it stopped to charge after a few minutes. Now it is hard to charge it again, because it stops every 5 minutes or so. It even starts to charge only when I connect the USB-Stick as well (if, however, I only connect the headset and do not connect the stick, the headset-light just flashes one moment, so I guess it does not charge) Why is it so hard to charge the headset?
    Thank you very much for your efford!
    With regards,
    Headsetissues

    Hello urtheone,
    I understand you are having trouble connecting your HP Bluetooth H7000 Headset to your computer. You also want to know what the term "Pairing" means.
    When connecting Bluetooth devices for the first time, a registration is required. This process is called Pairing. Most Bluetooth devices must be paired before they can communicate with each other. When devices are paired, they share a pass key which authenticates the two devices to make sure that wireless communication and security is established.
    After two devices are paired, the devices will automatically recognize each other and you can then connect and disconnect the devices easily. You don’t have to pair them again unless the pairing is deleted on one or both devices. 
    Now, what I need to know is what computer do you have? I need the brand and model number. It is either an HP computer or a Lenovo, it cannot be both.
    You probably need to turn on the Bluetooth hardware first on the computer before you can pair the two devices. Usually on a laptop it’s the Fn key and F3 or Fn and F5. Or you can go into Windows 8 and turn on and off your wireless settings.
    http://www.youtube.com/watch?v=fhuXwelEo-A
    Then you may need to go into Windows settings and go to “Add a device” to add the headset. This is where you will hold down the button on the headset to pair the device and connect. 
    Here is a video of a guy showing how to add a Bluetooth device on Windows 8. https://www.youtube.com/watch?v=QQZsd4Yk1nE
    If you do have a Lenovo computer and are having trouble connecting still, you will need to contact Lenovo for further info.
    Hope this helps.

  • Problems with Smart Wireless Headset Pro after upgrading my Xperia Sola to ICS

    Just want to let the community, and Sony, know that since I "upgraded" my Xperia Sola to ICS, the Text to Speech on my Smart Wireless Headset Pro is not functioning. It used to work just fine when I had Gingerbread on my phone, but when I upgraded to ICS, the Text to Speech voice is not output on the headset, but on the phone, on the call speaker... Hope this bug gets fixed soon.
    Maybe someone already knows of a solution?
    Thanks in advance.

    There is a new update available for the Smart Wireless headset pro, MW1 (0.1.C.0.3).
    Which software version are you running your MW1 on?
    If you don't have the latest I suggest that you use SUS to update your software.
    http://www.sonymobile.com/gb/tools/update-service/
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Sony DR-BT21G Wireless Headset & windows 7. Device driver software?

    Hi Guys, trying to connect my Sony DR-BT21G Wireless Headset , to my P.C via Bluetooth, 
    Operating system for my machine wasW8, but has been downgraded to W7. 
    I have installed a Bluetooth dongle. 
    The computer recognises the headset as a device, but states that "the Driver for the Bluetooth peripheral device is not installed" 
    Cannot find a download to fix this problem.. any ideas? 

    Please try the following. Each of these steps represents a possible solution to this issue, check the pair status after completing each step:
    Make sure both devices are turned off at the beginning of the pairing procedure.
    Be sure to place the Bluetooth wireless devices within 1 meter (3 ft) of each other.
    Make sure that the Bluetooth wireless device is in the Pairing mode.
    Enter the same Passcode for both Pairing devices.
    Make sure that the profiles of the Bluetooth wireless devices match. Devices that do not support the same profile cannot be paired.
    If the Bluetooth wireless device has a TX/RX (transmit/receive) switch, make sure it is set to the appropriate function.
    Some Bluetooth wireless devices can function as a transmitter or receiver only. Two devices that serve the same function (transmit or receive) cannot be paired. You must pair a transmitter with a receiver.
    The device you are trying to pair with must support Advanced Audio Distribution Profile (A2DP) and AVRCP (Audio Video Remote Control Profile).
    If pairing is not established within five minutes, pairing mode will be cancelled and the Bluetooth headphones will automatically turn off. If this happens, perform the pairing procedure again. 
    If my post answers your question, please mark it as "Accept as Solution"

  • My iPhone 5 will no longer connect via bluetooth to Fitbit Flex or wireless headset

    My iPhone 5 will no longer connect via bluetooth to my Fitbit Flex aftering updating to ios 7.  Apple phone support had me completely erase and set my phone up again as new to restart bluetooth pairing, then restore again through iCloud.  Worked last night but same problem today.  It also will no longer connect to my wireless headset in my car.  Of course I'm now 5 days over my 1 year warranty as well.  Any ideas?

    Delete the pairing from both devices then pair them again.

  • Wireless Headset

    Dear Friends,
    I need a Wireless Headset to make and receive VOIP calls (skype, ichat, SJphone, etc.) in my MacBook Pro 2.33 (MacOS 10.5.2)...
    At home I have a “GN Netcom GN 9330 USB wireless Headset” that is very good but it is not portable and needs an AC Power Adapter.
    I try the “Microsoft LifeChat ZX-6000 Wireless Headset” of a friend of mine that is a USB Wireless Headset, but this doesn’t work with MacOS.
    I already tried several bluetooth headsets but all have a very poor audio quality. The sound comes and goes out with interference and with interruptions like “cuts”.
    I have heard about “Plantronics Voyager 510-USB Bluetooth Headset System” as a good option, but I am afraid of spending money with it and then becoming a bad option.
    Can anybody tell me something about this device??? As the MacBook has Bluetooth can I only buy the Plantronics Voyager 510 Bluetooth instead of Plantronics Voyager 510-USB Bluetooth???
    Can anyone recommend me a good Bluetooth headset to pair up with my Macbook Pro for VOIP use. OR a good wireless USB headset???
    Sincerely,
    Paulo
    (sorry for my bad english)

    I find Plantronics kit excellent. I use their Pulsar headset for my iMac and mobile phone.
    However, unless your OS has A2DP bluetooth protocol, which my Tiger does not, you can only use the built-in mike on your pc unless you get a compatible bluetooth dongle. Two way conversation with the phone however, is OK.

  • Planatronics Wireless Headset..

    I recently purchased the Plantronics .Audio 995 wireless usb headset. It claims it works on both Windows and Macintosh. I have used Plantronics headsets in the past and they have worked fine with iChat.
    This headset will not give me any audio output in iChat. The mic works in iChat. I have both chosen in the iChat preferences, however, the sound does not work.
    This headset works fine using Skype, Garage Band, and Rosetta Stone, the sound works with iTunes.
    The only problem I have is the sound output in iChat.
    Has anyone had this problem? Does anyone have any suggestions?
    I called Plantronics and they said since it works with skype, it's not the headset, it's iChat.
    Thanks
    Message was edited by: greyeyed

    I do have wifi turned on, on my router, however, my computer is hardwired to it via cat5 ethernet cable. The wifi is only used by the iPhone. My mouse is wireless as well. Everything else is hardwired.
    I tried to see what I could do with the MIDI Sound Utility.
    First, I could not change the 16000.0 Hz that was the only option available and I could not change it by choosing another option or typing over it.
    I also tried to create an Aggregate Device and combining the both into One Device. I got a mismatch message so the only way I could Make them match was to back the speakers off to match the mic, by changing the 44000.0 Hz to 16000.0 Hz. However, iChat would not allow me to choose the Aggregate as an option.
    I did set the computer to use the wireless headset as my sound output and sound input. I set iChat to use the wireless headset as my sound output and sound input and when I received a call I heard it RING through the wireless headset, but when I answered, no sound at all.
    I am wondering if it's because it's showing up as two devices if iChat is confused and only giving me the wireless mic as an option for both input and output. I just don't understand why it works everywhere else and not with iChat. As no one else seems to have this problem, maybe it's time to call AppleCare.
    I did try talking with Plantronics and they say their product is working, it's a problem with iChat. They do not test with iChat and have no information, I have to go to Apple for help.
    Thank you for your time and patience and suggestions. Have a lovely day.

  • Logitech Wireless Headset and Mac Book Pro

    I recently purchased a Logitech H600 wireless headset. However I cant get my MBP to recognise the nano receiver. I have managed to get a connection between the MBP and the headset using standard bluetooth however the mic on the headset is not working as an input device. Has anyone any suggestions as to what I can do?
    Thanks

    Hello Weaver,
         I actually just bought this headset. The headset exposes itself as an A2DP music streaming device when paired to a standard Bluetooth host, but this is an unadvertised feature (There is no Bluetooth logo on this product). Officially, Logitech's dongle exposes itself as a USB Audio Device but actually compresses the audio and sends/receives via A2DP. In this mode, it can do two-way communications but the audio quality sounds much poorer than direct A2DP Bluetooth from the MacBook. But in A2DP mode the microphone doesn't function. It doesn't support mono headset (HFP) profile. Microphone support is only via their proprietary audio mode from the dongle.
          So I guess it's just a compromise depending on how you need to operate it. Skype, dongle. Music, direct Bluetooth IMHO.
    -LeJon

  • BlackBerry Wireless Headset HS700

    I like to know if his BlackBerry Wireless Headset HS700 can be use in the left ear with one of the hocks provide, Because I have a damage right ear and I can't put any think in that ear.
    Please any reply will help Thanks.

    flip it and rotate the rubber around and you will be fine
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • BlackBerry Wireless Headset HS700 before I buy ???

    I like to know if  this BlackBerry Wireless Headset HS700 can be use in the left ear with one of the hocks provide ???  Because I have a damage right ear and I can't put any think in that ear.
    Please any reply will help Thanks.
    Solved!
    Go to Solution.

    you just flip it and turn the rubber ear piece
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • WoW Wireless Headset Not Charging

    I bought my WoW wireless headset in August and so far haven't had many problems, except for when fully charged I can't seem to talk on it unless I plug the USB cord. But today for some unknown reason I will not charge. I tried using different computers and different USB ports and nothing. It will light up for 5 to 0 seconds then go black. For what I paid for this headset it should last longer than it did. Seriously does Creative just slap a few cheap pieces together put the WoW logo on it and charge 0 times what they should?

    Hi,
    Sorry about that, please write to Customer Support and ask for an RMA.

Maybe you are looking for