HP Hard Drive Diagnostic Failure Code VC7C3D-6NF7NV-MFPWWJ-60SJ03 -- What does it mean?

   Hello,   I recently used HP diagnostics (freshly updated) to run an extended diagnostic on the hard drive (Samsung/Seagate ST500LM012). The diagnostic failed within the first minute with the following failure code:   Failure Code: VC7C3D-6NF7NV-MFPWWJ-60SJ03   What actions should this failure code be prompting?   I did a search on the web for this rather elaborate failure code, but the search returned nothing. The system boots and runs with no problems, but the hard drive does have some bad blocks that have been recently picked up by "chkdsk /r" and added to the bad cluster file. A lot of device resets were being being logged to the Windows Event Log, issued by "amdsata" to the hard drive (/Device/Raid0), but since upgrading the amdsata driver to the most recent version from AMD's web site a day ago, the errors have stopped. So far as I can tell, everything else seems to be in order.   Any help from someone at HP (who can hopefully look up the failure code) would be very much appreciated.   Thanks,   EAT

the meanings to those codes are not made public and only Apple certified technicians have access to them.

Similar Messages

  • Failure ID : OLHKGK-64B78L-MFPX1G-61B703 what does it mean ( pavilion6 with windows 7)

    my computer keep sending me this message ( pavilion g6 with windows 7)
    HP PC hardware diagnostics UEF1
    smart check : passed
    long DST :failed
    failure ID : OLHKGK-64B78L-MFPX1G-61B703
    PRODUCT ID : B3X31EA#ABV
    HARD DRIVE :1
    could you please tell me what does it mean & how to solve it

    The hard drive has failed or is failing fast and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance  you have a 640GB hdd  so you could use a 750GB hdd but not a 500GB hdd.
    Your Maintenance & Service Guide shows how to replace hdd:
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&docname=c03292555&lc=en&product=52530...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP Pavilion dv8t-1100 Hard Drive Diagnostic failure - but runs fine?

    I have a HP Pavilion dv8t-1100 CTO Entertainment Notebook PC (Windows 7 Professional 64-bit) that seems to run just fine.  On a whim, I ran the pre-boot diagnostic check and received the following error code that the hard drive test had failed.
    Q7NK1R-52M62E-XD002J-60WW03
    Nothing in my PC's performance prompted me to run the diagnostic test, I simply ran it as a double check for the heck of it.
    Is this something to be worried about?  Of course an error code is always something to look into but since the PC seems to be running just fine is this a true error or simply a nuisance that should be ignored?
    I can not remember making any signficant changes lately to the installed software and have made no changes to the hardware at all.
    Any help would be greatly appreciated.
    MJD

    Hi,
    I would resaet (not reset) the HDD or you may want to try this first:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443463&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_in...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Error codes on install...what does it mean?

    HI all -- I had to uninstall and install premiere pro cs4 on vista and when it was done I received the following message:
    Media Encoder CS4 Dolby
    Error
    Error Code 2
    Adobe Premiere Pro CS4
    Error
    Error Code 2
    Adobe Premiere Pro CS4 Language Pack
    Error
    Error Code 2
    Also - when running Sherlock Codec Detective I noticed some broken codecs:
    MainConcept (Adobe 2) H.264/AVC Decoder
    MainConcept (Adobe 2) H.264/AVC Encoder
    MainConcept (Adobe 2) MPEG Encoder
    How do I get this fixed?  Reinstall?  I noticed on some message board games can mess up the codecs...my son installed a game from Steam called Alien Swarm that I just uninstalled....
    HELP!!!
    Opusf15

    This ARTICLE will give you a bit of background on the Sherlock errors.
    This is a general Adobe program installation CHECKLIST. You might see something that you missed.
    Good luck,
    Hunt

  • Xcode clang exit code of 254 error message; what does it mean?

    I have tried to develop an iOS app on Xcode 4.3 and it has failed and quite with the message: clang exit code of 254.
    This has happened twice with the exact same error message. When it happened the first time, I closed my project, then quit Xcode and opened it again. I thought that I needed to flush my settings and should start over again to make sure that the error did not happen again. But it did.
    Can you tell me what this error message means and tell me what I need to do to keep it from happening again?
    Thank you.

    this happened to me alsi and it turned out to be the slightest error in my code. I simply went through my methods in the class where the crash was occuring and found a couple of simple mistakes that 4.2 was not bothered with and fixing the second one fixed it.

  • I'm trying to burn a dvd and this code keeps coming up (0x8002006E) what does it mean ?

    What's this code mean???  0x8002006E, when trying to burn DVD/ CD ???

    What iMac do you have and what version of the Mac OS? From what program are you trying to burn the DVD?

  • HT1151 usb shows error code of 43...what does that mean?

    Ipod touch 3rd gen stuck on itunes screen....plug in usb and says it has malfunctioned.

    error code 43 when USB not recognised - Microsoft Answers
    Also:
    iOS: Device not recognized in iTunes for Windows

  • I have a 4S. When I try to get my icloud to work and verify my email it states "Request could not be completed, language code supplied is not supported" What does this mean and how can I correct it?

    I had accidently put in a different email but can't get it to change. Could this be the issue?

    means that apple mobile device service needs to be started try this article to get it turned back on
    Restart apple mobile device service

  • Why wont it work it wants a code as  well as serialnumber what does this mean

    i cant get ade13 to work its saying im offline and something about my clock what does all this mean

    See if this article is of help: iPod displays a folder icon with an exclamation point

  • HT201250 What does it mean to "partition" an external hard drive? Is it something that I want to do?

    What does it mean to "partition" the external hard drive?  Is it something I want to do?  How do I save files from another hard drive to the new one?  I have to reformat the old one as it was not set up correctly.  The drive I have is Seagate but not specifically for MAC, so I have to format it.. never have done this before. Don't know the jargon.  I read that Time Machine will back up automatically but I want to take files from the old drive to the new one.  Do I have to take them to the computer first and then to the new drive?  I need more memory on my computer. It's way too cluttered and congested.  HELP!

    Whoa! Slow donw. TRhere's a lot here. I would suggest you buy a good book on computers in general or macs in particular, one is "OSX the missing manual".
    What does it mean to "partition" the external hard drive?
    It means you take one large drive and make it into more than one volume. This means that it might show up as 2,3 or 4 inde[pendenmt drives. Each one could have, for example, a different operating system on it. Its  a good thing to do if you want to use a drive for several purposes
    Is it something I want to do?
    beats me, you didnt way what you're trying to accomplish. Sorta like sking "should i turn left?"  Depends on where you want to go.
    How do I save files from another hard drive to the new one?
    See advice n book above. Copy them in finder. Copy them in unix. Use a backup or sync utility. No different from Windows in that respect.
    I have to reformat the old one as it was not set up correctly.  The drive I have is Seagate but not specifically for MAC, so I have to format it.. never have done this before. Don't know the jargon.
    Hook it up. Run disk utility. Partition 1 or more partions. GUID map.  Format each partition Mac OS extended, Journaled.  for more, read book, above.  Seriously - we could give you more tips, but you really should learn enough to be comnfident.
    I read that Time Machine will back up automatically but I want to take files from the old drive to the new one.  Do I have to take them to the computer first and then to the new drive?
    I have no idea what you are asking.
    I need more memory on my computer. It's way too cluttered and congested.  HELP!
    What kind of memory and why?  RTAM? Hard drive space? Explain. By the time you are done explaining, i suspect you will have ansered your own question.
    Good luck,
    Have you read the PDF manual for your cmputer?
    Have you used a search engine to look for info, for example, in two seconds i got this from google and wikipedia:
    http://en.wikipedia.org/wiki/Disk_partitioning
    Grant

  • Hard drive is full software cannot get updated! what should I do?

    Hard drive is full software cannot get updated! what should I do?

    Here are some general tips to keep your Mac's hard drive trim and slim as possible
    You should never, EVER let a conputer hard drive get completely full, EVER!
    With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
    If it does, it's time for some hard drive housecleaning.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your Mac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
    STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    To find other large files, download an app called Omni Disk Sweeper.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    I have and apple tv,,..how do i play movies,from my apple mac,onto the apple tv..my movies are not on my itunes,but on an external hard drive...i just want to mirrow whats playing,on my mac to the tv...

    Are the movies in the correct format:
    Video formats
    H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
    When you say tit only sees your music folder, are you saying it only sees your music folder or does it see other empty folders.

  • Trying to erase hard drive, but get "input/output error". What does this mean? What can I do to erase my hard drive so I can reinstall?

    Hi all,
    My computer a few days ago wouldn't start up, would just stay at the gray loading screen forever. So as a result I tried to reformat the hard drive and reinstall, but I can't reinstall, until I erase the hard drive, but when I try to erase the hard drive it says the erase failed due to an input/output error. What does this mean? What can I do to fix my computer?

    The startup drive is failing, or there is some other internal hardware fault.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    My MacBook Pro is not recognizing my external hard drive.  The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data.  Is there any way to resolve this?

    WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
    For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
    What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
    Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

  • Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location.  I've searched my hard drive and the file doesn't exist.  What to do?

    This worked...found on a prior discussion:
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
    http://majorgeeks.com/download.php?det=4459
    From the link above (near the top of the page)....Under 'download locations'   click on 'download@majorgeeks'
    To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Restart your computer.
    Re-download Itunes (latest version form Itunes website) and install.  It worked!

Maybe you are looking for

  • Scanning of 2D barcodes

    Hi, I have created a 2D barcode via a SMARTFORM by concatenating several fields into one barcode field. Each individual field is suffixed by '\&'. The barcode appears to print O.K. but will not scan. I am using the same scanner which I use for scanni

  • Flash builder 4 productivity issue

    Hi! We are currently using flash builder 4.0.1 and I believe we are running into the source path issue : http://bugs.adobe.com/jira/browse/FB-27301 We have around twenty developers using flash builder on a large project and this issue is slowing us c

  • FF will Not open php files

    no info anywhere solves this for me

  • Mac book pro is not charging fully. any USB i use is disengaged by the computer as 'it uses to much power'. Can anyone help me please

    My Mac book Pro seems to have a power problem. I have used a telstra prepaid USB for 18 months as broadband. It has been great. Yesterday, I downloaded Mozilla Firefox. Sometimes later, I got a message that the USB ( telstra broadband toogle) had bee

  • Reuse of same tab when using same link

    Hi, I got a new third question... Safari 3.1.2, Windows XP Pro SP2 On one of the web pages I use, there is a listing of topics to which I can link. In IE and Firefox, if I right click on one of the topics and select "Open link in new tab", then once