HP HD-2200

 My computer crashed due to a bad motherboard. Installed a new motherboard. Then installed HP HD-2200 webcam. The web cam does not work in Yahoo. What do I do?

Hello lazarus331,
Have you tried to reinstall the driver?  What is the product number to your notebook?  Does the webcam work everywhere else except Yahoo?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • How to print on HP LaserJet 2200 over Ethernet?

    Hi,
    I did an upgrade to Snow Leopard and would like to print on a HP LaserJet 2200 over Ethernet. OS X and the HP printer drivers are up to date now.
    The printer has been cold reset and on the configuration print out there's the IP address 0.0.0.0
    Now my question is how to get this printer to work with Snow Leopard over Ethernet? I did not find a tutorial how to assign an IP address to the printer first so I got stuck.
    Could you give me a hint where I should start with the configuration first?

    OK, now the printer works
    I reset the router and checked if DHPC is running.
    I reset the printer (hold down the GO button, turn the printer on and continue to hold the GO button for five to ten seconds).
    Checked at router that the printer is visible as network device.
    At the router I assigned a fixed IP address to the printer.
    At OS X System Preferences > Printer I added a new printer with "HP Jetdirect - Socket", the fixed IP address and the correct printer driver "HP LaserJet 2200".
    Now the printer has been recognized well by the system (Tray 3, Duplex and printer RAM) and printing works.
    THANKS.

  • A problem with my mifi 2200 need help please

    Hey everyone. I came here to get help with my verizon mifi card that all the sudden after such a great run stops working!
    I had bought two mifi 2200 cards at the same time about a year ago. All I did was turn them on and was getting Internet connection wirelessly to my ipad right away. My connection worked for ages and never had a problem until recently. One of the cards stopped working roughly about three months ago. I looked around online for things that perhaps was stopping the device from working. I figured that the device was ready for an update and that was prohibiting the device from working, but here is the weird part; the other card (the exact same one) was working when this first card I mentioned wasn't. The card working continued to work until just recently like a day or so ago. Odd right. Anyway, the first card I connected to the USB cord that was provided in the box into my laptop. I was immediatly prompted to download Verizon Manager. My first time ever getting to this step. I was connected to my Internet connection at home via LAN line because that was my only option to Internet. After the software was downloaded, I was prompted to update firmware in which I did, then I was told to update wifi area coverage information which is just that search for finding local wifi spots, the next one is the important one that never seemed to work. The message read somewhere along the lines of you need to update coverage area information as if in there was some new program via coverage to get the stuff to communicate with the device. I said yes and then a message popped up saying Activation and had this bar going side to side, but after a while was told the programming failed. The device has already been activated so I don't understand the reason for the word Activation. Regardless, I tried doing other things I've read on this forum like resetting the device, turning standby mode to never, and so forth, but none worked. The device powers on/everything is on, and I can connect to the device, but I have no Internet. Please, some one tell me what is going on.
    Thank you and hope to hear from you soon.

    Sounds like you botched a firmware update and bricked your MiFi.
    Have you tried contacting VZW for a replacement device yet?

  • Possible Resolution to MiFi 2200 connection issues when using WiFi

    I was having issues connecting to the Internet with my Windows 7 laptop using the MiFi 2200 as a WiFi device.
    My WiFi adfapter was retaining the last IP Address it had obtained ... in my case my home network.
    Go to a command prompt and do an ipconfig -release followed by ipconfig-renew.
    It pulls an address from the MiFi from the DHCP range and works perfectly.
    Hope this works for everyone!

    Maybe also check specific for the 2 different tcpip protoclas loaded.. here is the solution that resolved my connection issue:
    Updated Vista Home sp1 to sp2 ( 450+MB download )
    Updated Atheros AR5007 drivers to 7.6 , 2008 release... there might be a newer release but I dont want to jack with it now that I'm working.
    Check in network connections for wireless connection.
         I had 2 TCPIP protocols loaded. v6 and v4 .. v4 had IP and DNS hard set. changed both over to auto assign
    WALLA Mifi is now working wirelessly.

  • Cannot print with HP Laserjet 2200 on network

    I run software update periodically and downloaded the HP driver update when it was offered.
    I uninstalled the Laserjet 2200 that worked with 10.5.8 in the print and fax system preferences and reinstalled it. It is recognized and I get the correct image for the printer, but when I try to print it pauses, I resume printing and it thinks a little and pauses again.
    I chose the Laserjet 2200 printer driver, but it does the same with a generic printer driver and the offered alternative Gutenprint driver.
    Other users on the network running 10.5.8 have no trouble printing to this printer.
    Thank you

    Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
    I have no experience with Linux, sorry.
    Michael

  • HP Laserjet 2200 and new JetDirect card and DHCP

    We had to replace the JetDirect card in an HP laserjet 2200.  As soon as that was done, the DHCP service will not give it an IP address in our network.  It has an APIPA address 169,254.X.Y.  The printer is in a distant branch office and so before I travel to the office I was hoping for hints on why this might have happened (and if anything can be done remotely).  On the laserjet 2200, there is no LcD panel or display to alter settings, so we must use the web interface, which we cannot get to.  Thanks in advance for anyone's thoughts.
    Marty Franek

    It appears this is for a commercial printer.  It would be best to post in the commercial LaserJet forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I need help printing with HP laserjet 2200 and OS 10.6

    I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

    Hey jeo1951,
    If you haven't already, try running through the recommended steps in the following article:
    Mac 101: Printing (Mac OS X v10.6)
    http://support.apple.com/kb/HT3771
    It should help you set up your printer.
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • I can't print to my HP laserjet 2200

    After installing Mac OS 10.4.4 Tiger on my Mac G4, Illustrator CS2, version 12.0.1, Adobe Acrobat and InDesign won't allow me to print to my HP LaserJet 2200.The error message says the PPD is wrong. I can use my Epson printer, and the LaserJet works as usual in Word and Mail, and even in Photoshop CS. It was printing fine until OS 10.4.4. It seems to be the Adobe products mentioned that have a problem. The printer uses a USB port, and shows up correctly in the System Profiler and in the Printer Setup Utility. I also repaired permissions. Can anyone tell me how to regain the use of my printer?

    success at last! I somehow found PPD drivers for HP laserjet printers on the Adobe website. http://www.adobe.com/support/downloads/product.jsp?product=44&platform=Macintosh
    Nowhere on the Adobe website do I see any indication that this PPD needs to be added when upgrading to OS 10.4 Tiger. Nor is it on the Apple site.They really should make an effort as there are pages of Forum postings regarding this problem.
    I had to upgrade Stuffit to 10x as well in order to expand the download. Once I did that the old HP2200 printer file had to be deleted from the Setup Utility, and the new printer driver added. After doing all that, my print dialog windows returned to normal and printing was restored. Thanks for your help. It was a nightmare. By the way, I did try the trial version of Fixamc, which didn't work, but cleaned up some files. They were very responsive to my e-mail request for assistance.
    Louis

  • HP Laserjet 2200 problem solved  v2

    I was having problems getting Snow Leopard to recognise my old HP LaserJet 2200 (in my case a 2200DN which I was trying to access through the Ethernet port of a Time Capsule). Tony from London in this post: http://discussions.apple.com/thread.jspa?messageID=10073041&#10073041 explained how to find the IP address of your LaserJet (for the 2200DN you press Go and Job Cancel buttons simultaneously, and the details are printed out). In my case Tony's solution of using this to connect via the Internet Printing Protocol did not work. Instead I found it did work using the HP Directjet - Socket protocol. The steps are:
    1. Find the IP address of your printer as described above.
    2. Click the + sign to add a printer in the Print & Fax preferences window
    3. Select the IP option (globe symbol) in the toolbar
    4. In the Protocol pull-down, select HP Directjet - Socket
    5. Enter the printer's IP address in the Address box
    6. Select the correct driver in the Print Using pull-down
    7. Click the Add button
    Hope that works for you!
    Julian

    Hi ialewis, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HP Laserjet 2200 orange light is on and paper wont feed

    HP Laserjet 2200
    Windows 2000
    Giving me no message on the problem but orange light is on by the triange with exclamation point
    Acts as if the paper is having trouble feeding

    Hi ialewis, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Printing problem with Epson photo 2200

    I have a Powerbook G4 running the most recent version of OSX. I can no longer print to my Epson Photo 2200. When I try and print the Printer window pops up, and the job automatically stops without printing.
    I have tried uninstalling and reinstalling the 2200 driver, I have hooked up a Canon printer to the powerbook (and this printer works fine with the powerbook), I have printed a test sheet on the 2200 (which is done without a connection to the Powerbook and it printed fine). The problem lies in the computer printer connection (I am using USB for the link).
    Any help you can provide would be greatly appreciated.

    I had a similar problem with a Epson Stylus Photo R800. The printer would not print Word docs or DVD media using the most updated software from Epson. After going through two printers I paid a consultant to come in on a Saturday night who told me that communication errors between Epson printers and current versions of the MacOS are encountered every day in his business. And neither Apple or Epson address the issue directly.
    To get the Stylus Photo R800 to work we had to reconfigure the driver to deal with Manual Feeding of documents and DVDs. It took about an hour of experimentation but once done...with no help from Apple or Epson...the printer did work very well. However, the Epson Print CD software is a total bust. We found a third party solution called DiscLabel that allowed us to print DVDs with the reconfigured driver. I'm disgusted with both Apple and Epson because Epson sells printer with the promise that it will work with the MacOS when three hours of struggle with useless software proved otherwise.
    If others have a better experience or know of simple solutions to the Epson Print CD problem please post them.
    Thanks in advance for tolerating my rant.
    Powerbook 167 GHz PowerPC G4   Mac OS X (10.4.6)  

  • I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

    I am trying to print a color photo on my MacBook Pro from iPhoto (not using Photoshop) using Epson 2200 printer, and everything I do in the Color Matching and Print Settings results in a photo with a pink cast to it. What am I doing wrong?

    Have you checked the ink cartridges and made sure the nozzles are clear? Are you able to print from outside of iPhoto with the correct color?
    Try the following: make temporary copy of the library and do the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    OT

  • Can't print from new laptop with windows 8.1 to HP 2200 DTN

    I can't print to 2200 DTN. have installed spftware and still has error

    @recasto 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • LaserJet 2200 and Windows 7 Professional 64-bit - a mutual disagreement society?

    In upgrading my XP Professional system to Windows 7, I've got a real problem linking to my LaserJet 2200d printer. The store that did the upgrade mistakenly upgraded to 32-bit Windows 7, but the printer worked fine. In doing the proper upgrade to 64-bit 7 Pro, a problem arose - nothing prints and the data light on the Laserjet 2200 does not even flash. Observables:
    1. I've tried all the 64-bit drivers published from Microsoft via Windows Update and from HP. Nothing works, including the universal printer driver and regressing to the 32-bit driver.
    2. The printer shows as installed, but with a yellow, triangular warning sign, yet there are no details on the problem or suggested fixes.
    3. Windows Troubleshooter doesn't fix the problem.
    4. I thought to uninstall all the drivers and start fresh, but links to HP's driver uninstaller yield a "page no longer available" error message.
    I use this printer as my workhorse - sure would appreciate some help. I'm a nontechie, so step-by-step instructions would be very helpful. Thanks!

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at HP Enterprise Business Community.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HOW DO I CONNECT AN HP 2200 TO OS X TIGER??

    Does anyone know how a Powerbook G4 w/Tiger installed to CORRECTLY to be connected to a dated but still-terrific HP Business Inkjet 2200 printer? So far I'm getting a flashing light response but no print yet after using a Belkin USB-to-parallel adapter for Windows and am waiting for a Keyspan Mac-compatible one in the mail but do I still need an HP JetDirect card? Are the 2001 drivers on the HP site OK? Are the 2250 & 2300 divers also workable? Downloaded them all. Anyone out there had any success between Powerbook & the "2200" (HP, that is).

    None of the drivers that come with OS 10.4 seem to work. The HP Businees Inkjet 2200/2250 driver downloadable from the HP site requires that you purchase an upgrade for the HP 2200 - this seems unfair and I haven't tried it. I downloaded a driver from opensource
    http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs
    and this is tantalisingly close to working (it prints once, then it won't print a second time without powering off the printer and waiting an eternity)
    I would very much appreciate a solution too, or else it will be a matter of throwing away a nice printer (with new ink!) - or trying to buy the ugrade from HP.

  • Epson 2200 and 2400 and Mountain Lion.

    Today I will buy an iMac with Mountain Lion.  Will I still be able to use my Epson 2400 scanner and 2200 printer?

    Please carefuly look at Printing Overview OS X Lion to see if your devices are supported, they're quite old now so it's possible support for them has been dropped however you may still be in luck.

Maybe you are looking for