HP HDX 16-1010EA: Battery charging and performance problems

Hi,
Due to my warranty being finished by HP, this place will be the only hope for some problems that I'm having, so please help guys.
1. I own a personal copy of Windows 7 Pro x64, installed it on a different partition from my Vista x64 that came with my HDX 16. After i updated the drivers, especially the chipset drivers, running on battery with  the balanced profile is like HELL, it's like loading windows 7 on an old 8086 IBM piece, it decreases the performance radically, now it's obvious that the problem is on a driver level but i've updated the chipset for 3 times so far and nothing has changed, i cannot address Intel for this since i have no idea what to tell them, so I'm hoping someone had some similar issues and has a solution for it.
2. Lately, my battery started to charge very very slow and end the cycle of charge pretty fast, now since i cannot act on the balanced profile (explained above why.) i have to use the high performance one, i know this can reduce the life cycle dramatically, but 30-40 minutes are too LESS for even the high performance profile. AND, i am a very careful notebook owner and i treat it as a baby, i charge it fully, then i unplug it immediately, and don't charge it until it reaches 10%. I also give it an airspray treatment every 2 months so you can imagine, this notebook should run as normal as brand new.
3. Now this is not a problem, though pure curiosity. I know the HDX 18 has two hard drive ports and it comes with two hard drives. After Intel upgraded from Matrix Storage app to the Rapid Storage Technology one, i have noticed a little extra interface (logical wise) on the output. Now to clear things out, HDX 16 has an interface for the hard drive, another one for the optical drive and an external interface (eSata), if you look clearly in the picture linked below, you'll see another port, a mysterious port:
http://i46.tinypic.com/x5cw28.jpg
Internal Empty Port, with a SATA Icon on it, is there any chance that the HDX 16 has a spare interface to connect another hard drive??
Regards,
Pluto

Anyone?

Similar Messages

  • No Battery Charge and Other Problems After OS3 Install - Solution?

    This relates ONLY to iPhone Users using the "PUSH" Function for Email or Other Apps!
    PROBLEM: It seems as though Apple is at least aware of the problem(s), i.e. once Exchange Email or another App using PUSH is configured, there is an OS3 bug that seems to be hardware independent (impacting ALL 1G, 2G and GS iPhones, but not consistently).
    SYMPTOMS: Include some or all of the following . . . rapid discharge (less than two hours from a fully charged phone, failure to charge (by AC adapter or USB to computer), failure to charge completely, perpetual dead battery icon, inability to boot, inability to automatically sleep, quite warm on upper back side, slow email, indication of a full or partially full charge dropping to no charge or dead when removed from charging source.
    CAUSE: OS3 Bug prevents consistent charging, draining the battery even when plugged in to a computer via the USB or into an A/C adapter (although I've been able to intermittently charge on an A/C adapter). In push mode, the Exchange email client on the iPhone continually queries the Exchange Server, cycling the iPhone CPU and continually draining the battery at a high rate (can
    WHAT I'VE BEEN TOLD BY APPLE:
    1) Defective Hardware (though I'm on my third 3G in a week, so I don't think hardware is the problem . . . Apple will consider replacement with a new 3G if my third 3G has the same problem)
    2) Corrupted App in iTunes - so I manually reloaded each app directly over wi-fi, one app at a time, this worked until I configured Exchange Email, at which time symptoms immediately appeared . . . so corrupted app unlikely.
    3) Initial data transfer after email configuration . . . but symptoms continued long after this.
    4) Wi-Fi - but turning wi-fi on or off had little effect, beyond normal.
    5) Restore to New Phone - this works fine UNTIL Exchange Email is configured and activated. Thus, the time consuming practice of reload all apps, photos, music, etc. will be for naught, once exchange email is turned on with "push"
    SOLUTION: Turning off "push" on your exchange email account
    1) Go to Settings - Mail, Contacts, Calendars - Fetch New Data
    2) Set Fetch Setting to 15 minutes to approximate the much more frequent "push" uploads and downloads. NOTE: Turning off \"push\" at this level will NOT turn off push on your exchange email account and the problem will not be resolved
    3) Scroll down and select - Advanced -
    4) Identify and select your Exchange Server account
    5) Select - Fetch -
    6) Leave settings
    Phone should cool down in a few minutes and work normally. The problem can be replicated and resolved repeatedly merely by toggling "push" on and off in your exchange email configuration.
    I was told that this is likely to be the "fix" until a patch is issued. No time frame was given for an actual fix that allows Exchange users to use push technology. Disappointing, since broader use of "push" technology beyond exchange was one of the big benefits of OS 3.0.
    NOTE: THIS PROBLEM DOES NOT OCCUR ON ALL iPHONES WITH OS3 USING THE EXCHANGE CLIENT. I have second 3G phone, identically configured (including push to exchange email) that has no symptoms at all. Go figure.

    Since two days ago, my battery indicator has been indicating 100% until the phone dies, which seems to be one of the symptoms you're describing.
    However, I don't use Push emails; my email client is configured to poll an imap server and has been that way since I got my phone over 6 months ago. To be on the safe side, I turned off Push anyway, but I'm still having the problem. Definitely 3.0 related as I've never had this problem before.
    Perhaps it's linked to an app? Personally I don't have a whole lot of them installed: Aurora Feint, fstream, twitterific, flixster, wikipanion, google earth, urbanspoon, STM Mobile, iDicto, Air Sharing, Facebook and Apple Remote. I've removed a few and will see how it goes.

  • First battery charge and current issues?

    Hi!
    I just bought a new MacBook (2.0 GHz, 160 GB). I have two quick questions:
    1. I plugged in my AC adapter, turned on the notebook for about 5 minutes to make sure it works fine, etc, then shut it down to let the battery charge. Would I have lost any battery capacity by not fully charging the battery first? And do I need to let the battery run through a full cycle when I first use the computer to ensure full capacity?
    2. Are there any updates/best practices for the 2008 (December) MacBook batteries? I know there was an issue in 2007, but for the new line am I set to go? And is it still best practice to put shut the Mac down instead of putting it to sleep to save wear and tear on the hard-drive/battery?
    sorry for all the questions: it has been 5 years since I bought my last notebook so I am a bit rusty/excited!

    See the following:
    About Batteries in Modern Apple Laptops
    Apple - Batteries - Notebooks
    Extending the Life of Your Laptop Battery
    Apple - Batteries
    Determining Battery Cycle Count
    Calibrating your computer's battery for best performance
    Battery University

  • Want more info about optimizing battery lifespan and performance

    I have read Apple Support's basic article on iPhone battery charging, but it doesnt answer all of my questions.  i am kind of a fanatic about maintaining the health and longevity of my battery.  I usually run it down to 3% or less before plugging in, then charge it all the way up.  This creates some inconvenience, but after one year, my iPhone 5 battery is still performing much better than any previous iPhone ever did.  Here are a few questions I have:
    1. Is it really neccessary to wait for the battery to drop to 3%, or could I charge it after it goes below 20%, if it is more convenient?
    2. Is there any harm in charging to less than 100% if I am in a hurry?
    3. If I regularly plugged it in at over 50%, would it develop a memory and hold less charge?
    4. What effect, if any, do Mophie Juick Packs have on iPhone battery health (I just got one)?
    If there were no memory issues, the most convenient thing to do would be to plug it in every night at bedtime.  Any knowledgable commentary would be welcome.

    There's a few aspects to this - and such several "correct" answers.
    First, what exactly will you be doing? Are you just editing or will there be vfx/color grading etc? If it is the latter, and you're in SD, I'd personally go with uncompressed 10-bit. The files will be large, but it will be worth it if you do a lot of processing.
    ProRes files will be much smaller, and still look very good, but may not hold up as well to heavy processing.
    Not sure what you mean with #2... what other codec(s) are you looking at. Saying it is "unnecessary for SD" is an interesting comment - depends on what you want to do with the footage.
    Some info about ProRes (and uncompressed) bitrates:
    http://www.appleinsider.com/articles/07/04/18/acloser_look_at_apples_new_prores_422_videoformat.html
    http://www.apple.com/finalcutstudio/finalcutpro/apple-prores.html
    http://sportsvideo.org/main/blog/2009/08/11/apple-final-cut-prores-lowers-bitrat e/
    http://documentation.apple.com/en/finalcutpro/professionalformatsandworkflows/in dex.html#chapter=10%26section=1%26tasks=true

  • My Macbook Pro runs VERY slow when unplugged. The battery charges and runs ok. Ran an SMC reset (no success), Safe mode (did not work), and hardware check (came back ok). What can I try next to fix this?

    Hello all,
    I am new to posting on this forum but I really hope that someone out there can help me out. I have a 13" MacBook Pro, 2.53 GHz Core 2 Duo, 4GB 1067 MHz DDR3, running OSX 10.6.8. My problem is that when I unplug the laptop form the charger and run it on the battery, the computer becomes unresponsive to any commands at all. It basically really slows down to a crawl. Even when rebooting it will take 5-10 minutes or more to do so. The odd thing is, when it gets plugged back in while any of this is going on, within a minute or two it works perfectly. It has been in a mac authorized repair shop for 7 weeks and has had a new logic board and a new hard drive replaced. The battery was tested and charges fine, holds a charge when unplugged, and the system profile shows the battery at Normal. Recently, many knowledgeable mac enthusiasts gave me tip that might help. Here is what I did: Ran an SMC reboot (no success), rebooted the computer under safe mode then unplugged it to test (no success), and ran a hardware test on the install disk (showed hardware ok)
    I am at a loss as to what to do next. It has become impossible to use this laptop for my classes when it is unplugged. I am about ready to just go buy a new one, and call this one a goner.
    I am hoping someone reading this can help with any other ideas on its problem. Help? Anyone?
    Steve

    LPBassman,
    since the tech in your IT department was able to copy your daughter’s data from her MacBook Pro’s internal disk, I’d suggest completely erasing the internal disk (using Disk Utility in Recovery mode, reformatting it with a “Mac OS Extended (Journaled)” filesystem), reïnstalling its original version of Mac OS X (either Snow Leopard from the grey Mac OS X Install DVD if it originally came with two grey DVDs, or Lion via OS X Internet Recovery if no grey DVDs originally came with it), running Software Update to get it to 10.6.8 or 10.7.5 respectively, reïnstalling Mavericks, running Software Update again to get it up to date, and finally restoring your daughter’s data.

  • I need the mother board plug for the battery charger and Bios Battery for an XT178 Laptop?

    HP xt178 Laptop (1P) F4685H SN: TW24604214
    I need to replace the motherboard plug that the Battery Charger plugs into as it is broken.
    The Bios Battery has failed and is NO: ML1220 with a number 28 in ink stamped on it.
    are these parts available from HP or can you provide me with common part numbers.
    Jack

    Hey JD,
    That's a reaalllllllllyyy old laptop.  As an HP employee I feel obligated to recommend picking up a new one at your local retailer.  
    If you are serious about finding parts then you may be out of luck.  HP stopped servicing that notebook in 2006.
    http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=F4685H
    -wes
    I am an HP employee.

  • Battery Questions and RAM problems in TP S531

    Hey there,
    I got my first Thinkpad (S531) about a month ago and the good news is I really like working with a Thinkpad. However, there are a few things and issues that reading the forums did not yet solve.
    First a bit of technical info about my system:
    Model: Thinkpad S531
    OS: Win 8.1 (self-install)
    CPU: Intel Core i5 3337U @1.8Ghz
    RAM: 6 GB (2GB+4GB)
    GPU: AMD Radeon HD8670M (+Intel HD Graphics 4000)
    1) Battery Life.
    I know there are plenty of posts about this but I have a quite specific question all the forum posts I found couldn't answer: Does the battery at the point where the power level reaches 100% stop charging and power is taken only from the power connenctor? If so, is there a way of only charging the battery up to about 80% and then start using only the connector for power supply?
    2) RAM.
    I bought my Thinkpad with 6GB RAM installed, a fixed 2 GB piece somewhere fixed on the motherboard and a 4GB piece in a normal RAM slot. Now, I know that this isn't ideal for dualchannelling, but that's got nothing to do with this problem. Rather it seems, that Windows only manages to access 2GB, according to what I read from the Task Manager (screenshot attached) What can I do to make all 6GB accessible?

    Hello Ihateallfruit,
    It sounds like you are concerned about the Standby Time increasing using your battery excessively. Here is some info about what the Standby Time indicates and why it keeps counting up when the device is asleep from the article named:
    iOS: About standby and usage time
    http://support.apple.com/kb/HT1805
    View Standby to see the amount of time the device has been turned on since its last full charge, including the time the device has been asleep.
    Here is another webpage that you can use to help optimize your settings to extend your battery life:
    http://www.apple.com/batteries/iphone.html
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • IPad 1 email and performance problems ios5

    Since I upgraded my iPad 1(wifi only) to iOS 5' I have been having numerous performance problems, and my email continuously sys "checking Email". I have tried restarting my iPod ith no luck. Deleting d reading the accounts woks briefly, but after 15-20 minutes the email problem ones back. The update has relly crippled my iPad.
    Has anyone else had this problem? Any ideas to resolve it?
    Regards,
    Jason

    While Downgrading is not actually supported by Apple I found a video on You Type that walked me through it. Just do a search on You tube and you will find it. The one I used was by lizards821. His videos cover any errors you might have.
    Once I reverted, I then did a restore from the backup I made when upgrading to IOS 5 and all of my apps were restored while keeping my downgraded IOS.
    Good Luck, it was well worth it for me. I have the stable IPAD I love so much back again.

  • BOSD, Battery issues and Heating problem after iOS 8 upgrade

    i have upgraded my iPad mini to iOS 8. Ever since I upgraded to iOS 8 am facing blue screen issues and heating problem as well. This is really frustrating even the patch iOS 8.0.2 dint solve the problem. Are you guys listening our complaints. When will you fixing it.

    The same thing happened to me on my 2012 Subaru Outback.  I'm not sure this will help you since you have a Honda, but I'm posting this just in case.
    I paired the audio on my car with my iPhone 6.  However, when I turned the car off and back on again, the iPhone would not pair automatically.  I had to manually connect the iPhone with the car.  Turns out there are two separate bluetooth pairings on my car: one for phone which allows up to 5 devices and one for audio which allows only one device.  So I did the second bluetooth pairing for the phone (had already done the audio), and that fixed it.  YMMV

  • Battery Charging and Diagnostic Issue

    My problems began a year ago when I bought a HP Envy 17. I'm sure you hear that a lot.
    I have come to terms with carrying a portable fire hazard around with me, as with the bizarre decision to seemingly set a different temperature for 'auto-overheat emergency shutdown' off battery than when on battery (side-note, any cure for that?)
    More pressingly, my battery has decided that it no longer wishes to charge itself. It has slowly reduced from 100% to 0% over the past few days, even when plugged in. The mesage reads "plugged in, not charging"
    The suggestion from HP forums is to follow the instructions here:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01443470
    I resolved to perform a battery test. It took several attempts to reach system diagnostics, but the battery test option was easy to find. On being asked to perform it, the screen displayed the following:
    Battery Check - Test in Progress
    Estimated Remaining Time: 8 seconds
    Progress: 0%
    It remained the same for the next 10 minutes. There was no response either to any attempt to exit the check by using the ESCape key. Eventually, I performed a sophisticated manouevre which involved pressing the 'Off' key, then trying again. The same happened the next time.
    Am I not waiting long enough? Or is there a better way to deal with the issue? Any advice would be appreciated. Thanks in advance.
    EDIT: Resolved by reference to a response given to a user who posted half an hour after I did. Bit sad I didn't receive one. Any info on how to meddle with the auto-shutdown thing would still be appreciated.

    Hi E57,
    Thank you for your inquiry.
    I am glad you were able to resolve your issue from another thread. 
    I do not know how to meddle with the autoshut down fearture, but here is a document that may assist you to reduce the overheating issues.   Troubleshooting an Overheating and Auto Shutdown Issue.
    I hope this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Battery charging and power adaptor issues

    I'm having slight issues with both my power adaptor and the battery itself.
    First I think I have cord issues as the light status can change from dim green to red or bright green if I move the cord around.
    Second, my MBP is having trouble recognising if power is going to the battery or if it's charging etc. It can recognise if there's no adaptor connected at all, but if there's an adaptor connected, it has trouble seeing if there's power coming from the adaptor even if the light is on. I.e. it can stay at 100% and supply comes from the power adaptor and then suddenly drop to 80% power and start charging agan. One issue that happened earlier today was the adaptor was connected, and the battery indicator was at 100% with supply from the adaptor. Suddenly the MBP shutdown, and when I rebooted it was at 17% (I've tried repeating that in case of a dodgy battery but I couldn't)
    System profiler Power information: (MPB is 18 month old)
    Battery Information:
    Model Information:
    Manufacturer: SMP
    Device name: ASMB012
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0200
    Charge Information:
    Charge remaining (mAh): 4779
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 4876
    Health Information:
    Cycle count: 111
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 285
    Voltage (mV): 12603
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 0
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: No
    Current Power Source: Yes
    Display Sleep Uses Dim: No
    Battery Power:
    System Sleep Timer (Minutes): 0
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 0
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    ID: 0x0100
    Wattage (W): 85
    Revision: 0x0000
    Family: 0x00ba
    Serial Number: 0x00527d2c
    Charging: Yes

    Try an SMC reset.
    http://support.apple.com/kb/HT3964
    If that doesn't help, the problem could be the adapter, the battery, or the I/O board (or a couple of less likely things). If you can borrow another adapter and/or battery, try them to see where the problem is. Or, if you're near an Apple Store, take it in and they'll diagnose it for you (for free, but they will charge for repairs if you need them and don't have AppleCare).

  • MacBook suddenly turns off at 40% of battery charge and trackpad doesn't work

    Hello,
    I had to replace the battery of my white MacBook (13 inches, mid 2010), because it was swollen, and the capacity was about just 20-30% of its original one. I bought a new one. Specifically, this one. After replacing it, I have those problems:
    When I run on battery, the computer suddenly turns off at about 40% of the charge. No warnings. Just turns off.
    The trackpad is not working properly. I can move the mouse, but I can not click. The swollen battery was pusing the trackpad, and I guess it's broken now. I don't know if I can replace it.
    Coconut battery tells that the maximum charge of the battery is below the design capacity. Not sure if this is a problem, or Coconut battery is just comparing my battery's numbers with the theoretical numbers of a brand new battery. Check a screenshot
    The battery drains too fast. From 100% to 65% in about 20 mins. So, at the end, I have less than 1 hour of battery time.
    I've tried resetting the SMC, following these instructions. Specifically, pressing (left side)Shift-Control-Option keys and the power button at the same time, releasing all the keys and then pressing power button to turn on the computer. Not worked. I think it was even worse.
    Could it be a problem of this specific battery? Or maybe just the MacBook doesn't accept batteries like that one? It's not original.
    In the first case, I would return the battery to get my money back. In the second case, I guess I should have bought an original one.
    Additional data that may be useful:
    Mac OS X 10.8.5 (12F4S)
    EFI boot ROM version: MB71.0039.B0E
    SMC version: 1.60f6
    About EFI boot and SMC versions, those are the last available official updates, obtained from here.
    Many thanks in advance.

    I'd say it was a faulty battery.

  • Simple script to get battery charge and time remaining...

    Here's something I threw together last night, to report on the battery at the command line.  It uses /proc/acpi/battery.  My battery is C11F, just substitude your own.
    It takes (remaining capacity) / (design capacity) to get the percent left, and it takes the (discharge rate) / (remaining capacity) to get approximate life.  If the rate is zero (which mine reports as when plugged in) it says the battery is charging.
    I don't know if this will work for other people, or if different batteries give different times of information to ACPI.
    #!/bin/bash
    current=`grep remaining /proc/acpi/battery/C11F/state | tr -d A-z | tr -d " " | tr -d :`
    total=`grep "design capacity:" /proc/acpi/battery/C11F/info | tr -d A-z | tr -d " " | tr -d :`
    rate=`grep "present rate:" /proc/acpi/battery/C11F/state | tr -d A-z | tr -d " " | tr -d :`
    percent=`bc << EOF
    100.0 * $current / $total
    EOF
    `
    if [ $rate -eq 0 ]; then
    echo $percent'%, charging'
    else
    hours=`bc << EOF
    (1.0*$current) / (1.0*$rate)
    EOF
    `
    minutes=`bc << EOF
    60.0 * $current / $rate - $hours * 60
    EOF
    `
    echo $percent'%, '$hours':'$minutes
    fi

    zen_guerrilla wrote:You can also try the 'acpi' pkg, which does exactly the same thing .
    Considering the acpi package is only dated a few days ago, I don't feel too bad about not knowing about it.
    BTW, here's an update I did to my script.  This one prints minutes less than 10 correctly (1:02 vs 1:2), as well as finding batteries with other names, and printing the CPU speed (nice if you have speed stepping turned on).  It rounds to the nearest 100MHz, which is easy to remove if you don't like it.
    #!/bin/bash
    speed=`grep "cpu MHz" /proc/cpuinfo | tr -d A-z | tr -d " " | tr -d :`
    current=`grep remaining /proc/acpi/battery/*/state | tr -d A-z | tr -d " " | tr -d :`
    total=`grep "design capacity:" /proc/acpi/battery/*/info | tr -d A-z | tr -d " " | tr -d :`
    rate=`grep "present rate:" /proc/acpi/battery/*/state | tr -d A-z | tr -d " " | tr -d :`
    int_speed=`bc << EOF
    ($speed+50) / 100 * 100
    EOF
    `
    percent=`bc << EOF
    100.0 * $current / $total
    EOF
    `
    if [ $rate -eq 0 ]; then
    echo $int_speed'MHz, '$percent'%, charging'
    else
    hours=`bc << EOF
    (1.0*$current) / (1.0*$rate)
    EOF
    `
    minutes=`bc << EOF
    60.0 * $current / $rate - $hours * 60
    EOF
    `
    if [ $minutes -lt 10 ]; then
    echo $int_speed'MHz, '$percent'%, '$hours':0'$minutes
    else
    echo $int_speed'MHz, '$percent'%, '$hours':'$minutes
    fi
    fi

  • Quick battery charge and drain

    Hi,
    I hope somebody will be able to help / explain this issue to me - I bought the z3c two days ago (haven't charged it for 30 min before first use, really don't know if this could be an issue), and I have noticed that unlike most people's charging time (which is about 2.5-3 hours) mine is around 1.5 hours on the micro usb charger (1% per 1 minute), and the battery drains quickly with a bit heavier usage. I upgraded it automatically to lollipop, and I did a factory reset afterwards when I noticed that the battery was draining quickly. Google location services have been disabled, I only keep the auto sync on from time to time.
    Is there a possibility that something is wrong with the battery or am I just doing something wrong with the applications etc? Should I wait a couple of days to see how the battery behaves? (I'm sorry if this question has been repeated somewhere else already).

    Hi Nerie
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You have taken some good steps so far to troubleshoot the problem. Have you tried putting the phone on Stamina mode and/or Low battery mode? These functions are designed to maximise the battery life. As well as turning off Google location services you can also turn off Bluetooth, Wi-Fi & Mobile data when not using them. Also try turning the screen brightness down as I can see the Screen is using the most power. Turn off phone or put into Airplane mode when there is no network coverage in the area as the phone repeatedly scans for available networks - which consumes power. 
    Hope the above steps do help, keep us updated.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • HT4060 my i pad show the charging green light .it works properly .however it was 37% battery charged and i tried to charge it .but it refused to charge .pls help .i had the same problem a while ago and then suddenly it charged on its on .pls help

    my i pad is not charging ,however it shows the green light and charging signs
    .before i had this problem, then it started charging on its own . now i was abroad it was 37% charged .was going to charge it for the journey and it stopped charging again .but it works excellent except for the charging .it still works but i am not using it now .just left it on the charger .the green light and the battery sign shows its charging ,but the i pad now is 35% the battery power .pls help .i cant aford another pad .i am broke and i am so much used to it

    It may just be giving you false battery info. Unless it actually dies prematurely, Its just a software error. I would recommend restoring. http://support.apple.com/kb/ht1414

Maybe you are looking for