Hp hdx18 no bass and treble on windows 7

I have an Hp HDX-1000CTO and after upgrading to windows 7 and Installed of the drivers from the HP website.
I do not get on my display the Bass and Treble, however I do get only the sound display which I have to admit is not as nice as the one I used to have with my windows vista displaying the  volume, bass and treble at the same time.

I have an Hp HDX-1000CTO and after upgrading to windows 7 and Installed of the drivers from the HP website.
I do not get on my display the Bass and Treble, however I do get only the sound display which I have to admit is not as nice as the one I used to have with my windows vista displaying the  volume, bass and treble at the same time.

Similar Messages

  • Can't adjust Bass and Treble from windows Mixer (SB Audi

    Hello,?i have Sound Blaster Audigy (5.)i installed drivers for it, but i cannot adjust Bass and Treble from ordinary W?ndows Sound Mixer, because sliders are passi've (disabled)?what is the solution?tahnk you. my system is:windows xp prof. edition + SP2Pentium III 800 mhz,?384 mb ram,asus cuv4x 33mhz mainboard.

    Check your "audio" settings in the sound and audio properties of your control panel.

  • Control bass and treble in System Pref

    Is there a plugin or an add-on that will allow me to control bass and treble output from my Macbook's soundcard?

    when you click on "window" in the menu bar, there is and euqualizer. You can control the bass/treble and preamp levels from there. Other than that, there is no other option. Why kind of setup do you use? Because from the macbook speaker it won't make much of a difference.
    Cheers
    Charles

  • HP Pavillion dv6-6c 11nr entertainment pc Bass and Treble settings not saving.

    I have a pavillion dv6-6c11 nr laptop and every time i turn it on I have to turn it on i have fix the bass and treble settings. They are automatically set to -12[bass] and 4[treble]. It sounds terrible so I set both to 0. After setting it to 0 I am satisfied with the sound. But it resets itself every time i turn on my laptop. It is frustrating me to no end. I've tried updated my drivers but they all say they are up to date. If it helps im running windows 7 64bit with beats audio. Im not sure what other specs i should add. Also I have no idea how to use Beats.

    Hi JeffyBoy1792,
    You'll find the answers to both questions in the owners manual of your notebook, beginning on page 35.
    Please let me know if this helps.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cannot adjust bass and treble settings.

    I just installed the SoundBlaster Li've 24-bit sound card specifically so I could adjust the bass and treble settings under Advanced Options in speaker settings for a new job, but the bass and treble settings are greyed out. Can you tell me why this is? I have Windows XP.
    Thanks,
    Danielle

    I'm having the same problem -- I also have Win XP Home. So I'll be interested to hear of any suggestions for fixing this issue. Also, when I try to record voice using Windows Sound Recorder and play it back, the sound volume is very low and poor quality (yes the mic volume is turned up).

  • Bass and treble settings

    Is there anyway to fix my bass and treble settings from constantly being shown on my screen?  It comes up automatically, usually after the computer has been on for a short period and moves the setting from low to high, shutting off my internet access in the process.  I either have to click the mouse buttom "on a page" I want to see or am on or hit the escape buttom.  Sometimes it goes away, other times it continues to flash on my screen as if it is an equilizer moving back and forth.    How do I fix this?  

    I'm having the same problem -- I also have Win XP Home. So I'll be interested to hear of any suggestions for fixing this issue. Also, when I try to record voice using Windows Sound Recorder and play it back, the sound volume is very low and poor quality (yes the mic volume is turned up).

  • Bass and Treble Sliders in Audiomixer disabled T60

    Hi!
    I just bought a used T60 with a integrated Digital HD sound card. Sound/Audio is working. Problem is: The audiomixer shows control-sliders for Bass and Treble. But they are greyed out and both set to minimum. Result is: The audio sounds pretty low/poor - nearly unusable. To make it work I need a solution to increase the Treble Slider or the Treble itself to a higher value.I have confirmed I used the most recent drivers. OS is: Windows XP Prof Ver. 2002, SP3.
    Thanks in advance
    Josh

    cold_terminator,
    IIRC, that's normal for the Audigy Value. You should have the Creative Equalizer application. That takes the place of the treble and bass controls. It's more complex of course.

  • My question was how do you control bass and treble on your Mac pro? he act of the matter is you can't. Why don't they just say that rather than reading all of the ********

    My question was how do you control bass and treble n a Mac Pro with the latest software.
    The answer is you can't
    In summary why don't you say that upfront?
    Instead of reading a bunch of crap that says nothing

    just a suggestion: try soundflower or Audio Hijack Pro. I know with the 2nd one, you can control the bass, treble, and all that, with anything that makes sound, from itunes, to Safari, DVD player, Skype ( I guess) and other stuff. Worth the $, IMO, so in answer to your question  dbumgardner1, no, no you can't.  I suppose in that sense, Windows has us at a loss. We also need 2nd party stuff to play BluRay's, too. However, I haven't seen any Macintosh viruses (virii?) for a long long time....
    so, there's that....
    JB

  • Hp pavilion dv 8-1200 bass and treble level indicators

    the bass and treble level indicators keep randomly popping up on the screen while using the computer interrupting operation. can anything be done to resolve this issue?  
    This question was solved.
    View Solution.

    Hi,
    If you haven't done so already, download and apply the firmware update for the capacitive strip on the link below.
    http://ftp.hp.com/pub/softpaq/sp53501-54000/sp53677.exe
    When this has completed, shut down the notebook.
    Unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Is there a way to adjust the bass and treble on my iMac Power PC sound system?

    Is there a way to adjust the bass and treble on my iMac Power PC G5 sound system? It has a lot of volume (more than my JBL speakers).

    No, but iTunes has an Equaliser that enables you to do that.

  • My Bass and Treble randomly change on there own until i kill the hptonectl.​exe on the task manager.

    After killing the hptonectl.exe task i can no longer control the volume. Any suggestions or upgrades to the hptonectl program?
    Thanks
    Mark

    How can I fix the HptoneCtl.exe problem? The Bass and Treble control pops up on the screen randomly

  • Does audigy value oem have bass and treble contr

    Hi guys, i just bought an audigy value oem today and i'm using vista x64, for some reason i can't seem to find the sliders for bass and treble control, i've installed the 64bit drivers for vista and the sound card works like normal, but i upgraded from a soundblaster li've value and even that had bass and treble control but it was in win xp so is it the card or vista?thanks guys.

    Hi guys, ............it is here by to inform that I used the "sound blaster li've value (5.) few months ago. but now I've upgraded to 'sound blaster Audigy value (7.). but I can't find any bass and treble option in XP and Vista.
    I think creative don't give the option with the 'sound blaster Audigy value' card.
    what u think about it's
    If it possible so please inform me anybody......my ddress is here ([email protected])

  • Adjust the bass and treble

    Hi,
    I'm trying to adjust the bass and treble so that when I hear my Web Radio in Streaming I will adjust the bass and trebles.
    I can do it very well with a file. But how to perform it with the streaming radio ?
    Thanks in advance

    Did anyone ever answer this???? I'm having the same issue but on my ipad mini...

  • Controlling Bass and Treble

    Here is my issue. I just got a subscription to XM online. When listening to music there is no way to control the bass and treble. Is there any software I can download to do this, or is there a way to use the Itunes eq when listening to music online from the XM website?

    No, you can not use iTunes. Get Audio Hijack Pro which will allow you to add effects (like an EQ) to any app's sound you wish. You can find AHP on versiontracker. 
    <hr width="250" align="left">
    HangTime [Will Compute for Food] B-)>
    ♪♫ The Bullets and Bones Band ♫♪
    Disclaimer<hr width="250" align="left">

  • Controlling Bass and Treble with AS3

    Is there anyway to control Bass and Treble using AS3? I'm
    trying to simulate a new aircraft entertainment system and I'm
    stuck. Thanks

    flash is capable of controlling bass and treble but you'll
    need to code that yourself or find someone that's already coded
    it.

Maybe you are looking for

  • Macbook Pro Mid 2010 keeps on crashing after update

    I updated my macbook pro mid 2010 and now it randomly crashes! Any help is appreciated. Thank you Anonymous UUID:       D4BFA1B4-3FC3-CB21-4ABA-A50D9CE38F8D Tue Jan 14 14:38:42 2014 panic(cpu 0 caller 0xffffff7f9e5fffac): "GPU Panic: [<None>] 5 3 7f

  • HP LaserJet P1005 vs Linux drivers [was a PEBKACH after all]

    Hi, I'm trying to set up my HP Laserjet P1005 printer on Arch.  After some googling I found that the foo2xqx driver should support it -- looking at AUR, I found foo2zjs driver package -- which isn't the same, but after a closer look it seems to inclu

  • Error in sales order creation using bapi

    Hi, Iam trying to create sales order by using BAPI_SALESORDER_CREATEFROMDAT1 and when iam trying to execute the function module by passing all th eparameters and iam getting the error as inspite of entering sold_to_party and ship_to_party details in

  • How do you add chapter markers to your podcast?

    Does anyone know how to add chapter markers to a podcast so that listeners can skip to the section they are interested in? And how to change the artwork as the chapters change?

  • Arabic text running the wrong way

    I need to place a series of words, in Arabic, in an array. When I copy the words from the original text document to the script window, the order of the letters reverses from right-to-left to left-to-right, so basically all the Arabic is being written