HP-HP, the fan of the laptop is not functioning properly

Product name:HP-HP
Windows 7
Operating system : 64 bit operating system, RAM (4.00 GB)
I encountered the problem this morning. When i boot on my laptop there was an error message showing that the fan of my laptop is not functioning  well and therefore i should visit this site for support. Thank you.

Hello duckzilla2009, welcome to the HP Forums.
I see that you have a message on your notebook about the fan not working correctly. I will try to help you with this.
If you could, please provide the Model and Product numbers for your notebook.
Here are a few documents that may be able to help you with resolve the error message related to your fan.
    System Fan (90b) error message on startup - if you're getting that specific message follow this document.
    Error: CPU Fan Failed - follow this one for any other fan error message or if the above didn't correct the issue.
    Reducing Heat Inside the PC to Prevent Overheating - I'm providing this document, as steps involved could help you with the fan. If the notebook is overheating it would be putting a lot of stress on the fan.
Start with that and let me know how things go.
I worked on behalf of HP.

Similar Messages

  • One or more of cells in the battery are not functioning properly?

    one or more of cells in the battery are not functioning properly
    I assume this means I need a new battery?  This was the message I got when I did the battery check.  
    The battery will not charge.  Laptop just runs on AC power and battery is in but will not charge.  What happens that causes cells in battery to not work?  I did leave it off a few months.  Would take make the battery go bad?
    Thanks for any info you can give me.  Have a HP G60-230US Notebook PC

    Hello dlriowa,
    Take a look at this document and let me know if it helps to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • X120E Multi Core Warning -The hardware is not functioning properly. What now?

    Ran the Thinkpad ThinkVantage Test and received a Warning on the CPU Multi-core test.
    The hardware is not functioning properly. To correct the problem:
    Turn off the system.
    Detach the power cord and wait for one minute.
    Re-attach the power cord and re-boot the system.
    Re-run the test.
    Performed the above, still receiving the warning.
    What next?

    Have you contacted Lenovo Support? The only thing I can think of is either a straight-up hardware defect or maybe cooling fan blockage of some sort. Could be the RAM, though it's unlikely. Still, if it consistently has this issue, and something like Prime95 errors out on one of the cores, you may need to RMA it.

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • "Always Show the Tab Bar" Not Functioning Properly

    Using Firefox 13 with Windows XP Professional. Even though my tab options are set to "always show tab bar" my tab bar isn't showing when there is just the single page. If I add more than one tab to the window they will show up but the first one will not and the only way to see its page content is to remove the additional tabs. If I have five tabs open at one time for example only four will be visible.

    Try:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    *https://support.mozilla.org/kb/Toolbar+keeps+resetting
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • MAC 2009 laptop volume not working properly.

    The volume on my Mac 2009 laptop is not functioning properly.  Earlier today i was listening to music and the sound was fine; but when I went on my computer again, the sound sounded like I had headphones plugged in, which I did not.  I checked the sound settings and nothing was on mute and all the volume's were set to the highest level possible.  I restarted my computer and reset the NVRAM/PRM, but all to no avail.  When I put on my headphones, the sound is completely normal and works prefectly, but when I take the headphones out, it sounds like the headphones still in plugged in to my computer which it is not.
    Any help will be greatly appreciated.    
          Thanks!

    Hello parry,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    Have a nice day,
    Mario

  • Can not drag files off iphone onto windows 7 Laptop (Error: A device attached to the system is not functioning!) Any ideas on how to resolve this, Much appreciated

    Connect phone to laptop, AutoPlay Box appears, click open Device to view files, internal storage, DCIM, Drag all Pictures/Videos into folder on desktop. Message pops up within a few seconds, Saying  'A Device Attached To The System Is Not Functioning.'
    Can any be of assistance?
    Many Thanks.
    Callum.

    Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
    It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
    Check the Device Manager for non-functioning network devices.
    Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system.

  • Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

    Can you charge a macbook by any other means than the power cord? For example the usb drive? My cord works fine but the outlet on the laptop is not.

    The only way to charge a MBP is with a MagSafe power supply (wall or airline) try http://support.apple.com/kb/TS1713

  • Time and date on the laptop is not in accordance with the current.

    1. Product Name and Number
    HP G42-360TX
    2. Operating System installed (if applicable)
    Windows 7 64-bit
    3. Error message (if any)
    Time and date on the laptop is not in accordance with the current
    4. Any changes made to your system before the issue occurred
    before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
    Time and date on the laptop is not in accordance with the current. I've tried to change it manually, but it will change back to yesterday's date.
    before, I installed windows 7 32bit is no problem, but when i install win 7 64bit new problem emerged.
    whether it was the CMOS battery is weak? when I bought the notebook in 2011

    Have you tried setting it to synchronize with an internet clock...click the date in the lower right corner...change date and time settings...internet time. Also check the time zone.

  • Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Bought a brand new battery from an authorized Apple Premium Reseller but the laptop is not recognizing the new battery

    Yes, it says no battery installed. The battery icon with an X and system profiler saying no batter installed.
    Tried the SMC Reset - didn't work!

  • I do not know why but my apple ID WORKS IN THE LAPTOP BUT NOT IN THE IPOD TOUCH

    I can use it in the laptop but not in my Ipod touch!?

    What happens when you try to use it on the iPod?

  • Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

    Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

    Please search the forums. This has been covered here extensively.

  • If I have a laptop with a music playlist but the laptop is not on the internet, can I transfer the music from my laptop to my iphone?

    If I have a laptop with a music playlist but the laptop is not connected to the internet, can I transfer the music from my laptop to my iphone?

    See also Recover your iTunes library from your iPod or iOS device.
    tt2

  • The charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    the charger is showing green but the laptop will not turn on. The stand-by light is flashing and the laptop is making a bleeping sound. Any suggestions?

    Could be bad ram or logic board. Take it to an Apple store or AASP.

  • I got this message when saving photo from Iphone4s to my laptop's folder. "The device attached to the system is not functioning"  What can I do?

    I cannot save photo to my deskstop. When I copy to my folder, it indicated "The device attached to the system is not functioning".  I don't update my IOS to the latest version in case my photo from my iphone will be missing.  Please help. Thanks.

    The Only thing I could do to save my pictures on my computer was to send them via Facebook chat to myself, send them one by one then on your computer open then and dragging them is way faster than right-click Save As. I just did that and I do not want to reset my phone so I guess I will continue doing this as I get more pictures or until I feel like resetting my phone. I believe this issue happens when you Connect and while transfering one or more file from one end to another, and you suddenly disconnect the iPhone or any apple divece, the file that wasnt completely transfered gets corrupted and I guess the whole /Picture/Video folder or perhaps the whole device gets corrupted as well. I am sure that this is a cause to this issue but I do not know if there are other causes or if the same one happened to you.
    How to prevent this from happening again?
    Always go to iTunes and click on "Eject" under your device tab before disconnecting your device from your computer. Even if you are not transfering any files at all.

Maybe you are looking for

  • Render Error: -50 I know this has been posted about a lot

    Hey folks! I understand that this question has been posted many times to the community, and while it is not my intent to waste anyones time (Tom Wolsky), I have not found a solution that works. Can anyone help me? I will monitor this feed to respond

  • Userexit for Payment block invoice in MIRO/MIR7/Mrrl

    Hi All, In an purchase order invoice the the Payment block is defined at coompany code. My requirement is to define it at more granular level like at level of item category. For certain item categories I have to avoid the tolerance date check of paym

  • Cisco IPsec - RV042G

    i could only get VPN to work with PPTP.. but its a slow as #$%#-. is there a way to make this work with Cisco IPsec? and would it be faster then PPTP?

  • Date parameter used in report selection

    Post Author: calj CA Forum: Upgrading and Licensing In CR XI, is there an option to convert date/time fields to date that was under Report Options in 8.5?  In the Select Expert date/time fields display the time, and date parameters are not listed unl

  • Crystal Reports 2008 and Crystal Enterprise 10

    I am currently running crystal reports 10 (CR 10) and crystal enterprise 10 (CE 10). I would like to upgrade CR 10 to CR 2008 but keep CE 10. Will CR 2008 work with CE 10? Can I publish CR 2008 to CE 10?