Hp hs2434 windows 7 driver needed for dm1 4310nr

Hi all,
I recently formatted my dm1 4310nr from windows 8 to windows 7.  I went to the driver page for the dm1 and it had the Ericsson HP hs2320/hs2330/lc2000/lc2010/hs2340 drivers for win7/8, but not the HP hs2434 drivers.
The hardware ID is 
USB\VID_03F0&PID_4B1D&REV_0002&MI_05
USB\VID_03F0&PID_4B1D&MI_05
Thanks!

You don't need monitor drivers, the operating system runs it natively (plug'n'play).
What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

Similar Messages

  • Windows 8.1 display driver needed for HP G62 laptop

    Windows 8.1 display driver needed for HP G62 laptop

    Help us to help you by posting the following information.
    1.  The complete Model Name. or Product Number. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
    2.  The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
    It would also help if you let us know which CPU your notebook has installed.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Requirements for JDBC Driver needed for SOA 8 }connection pool

    Hi,
    I have an AS400 jdbc driver. This driver is JDBC API version 2.x. Also is a Driver Type 4.
    What are the requirements of a JDBC Driver needed for connection pool in SOA 8?
    Thanks.
    Lorenzo Jimenez

    You can use pretty much any jdbc driver, including type 2 and type 4.
    You need to make sure your shared libraries needed by the driver are available to the appserver when you boot.
    Other than that, it is no different than configuring any other driver.

  • ATI Radeon 9000 Pro Mac AGP (driver needed for OS 9.2?)

    Hi guys!
    How's everybody doin?
    I just picked up a used ATI 9000 AGP 128 MB (as an upgrade for my G4 Quicksilver 800 MHZ).
    I'm using 2 HD's (one with OS9), the other (with OSX)
    I think OS 9.2 will do ok without the need for a driver, but I just wanna make sure ...
    Thanx
    Everyone is very helpful around here
    Mike

    Hello again Carl, and Dave
    I know it's been a while since we last talked about this issue. Well apparently, I do have OS freezing problems
    with 9.2 and the ATI 9000 Mac Pro - take a look:
    http://discussions.apple.com/message.jspa?messageID=4289264#4289264
    Wonder if your driver would solve this?
    But can I put your driver in the system while it's still functioning with the older OEM video card back in?
    (that's the only way I can get the system not to freeze)
    Thanks
    Mike

  • Windows script needed for the following tags

    hi ,
    I am currently automating a web task using windows script.
    For the below source script , i need wsh script
    <td title="Export Report" class="ui-pg-button ui-corner-all" style="cursor: pointer;" jQuery1404898744838="556">
         <div class="ui-pg-div">
                 <span class="ui-icon ui-icon-newwin"/>
                            Text - Export
    From the above script,
    I need to click the "export"
    Please anyone guide me to form a WSH script for clicking the "Export"
    So far my code is
    Set IE = CreateObject("InternetExplorer.Application")
    Set WshShell = Wscript.CreateObject("Wscript.Shell")
    IE.navigate "url"
    IE.Visible = True
    Wscript.sleep 10000
    IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter4").focus()
    WScript.sleep 10000
    IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_ddl_datefilter").SelectedIndex=4
    WScript.Sleep 10000
    IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_fromdate").value = "30 Jun 2014"
    WScript.Sleep 10000
    IE.Document.getElementbyID("ctl00_ContentPlaceHolder1_txt_todate").value = "04 Jul 2014"
    WScript.Sleep 10000
    IE.Document.getElementbyID("a_genslasummary").click()
    WScript.sleep 10000
    Thanks in Advance
    Naveen

    There is nothing to click on export.  It is just text.  YOu also cannot click on anything that does not have an event associated.  Many events ae hidden in JS code.
    None of the objects in your HTML have IDs so they will not be easy to find.
    ¯\_(ツ)_/¯

  • CanoScan 88))F driver needed for Snow Leopard

    I need a Driver for the Canon CanoScan 8800F. It does not work with the system. I checked ith Caon and there isn't a driver for it. Does anyone know how to fix it?

    Looking at the Canon Australia web site, there is a version 13.9.1 driver posted for the CS8800F that quotes 10.6 as being supported.
    http://support-au.canon.com.au/contents/AU/EN/0100018002.html

  • Canon 3245 driver needed for Mac OS X Yosemite 10.10.1

    Dear
    All the drivers available on Canon website do not support version 10.10.1
    I am urgently in the need for a driver Canon 3245.
    Please help.
    Thanks and Regards
    Shubham
    Mackbook Pro, OS X Yosemite, Version 10.10.1

    This includes drivers for 10.10
    http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _3225_3230_3235_3235i_3245_3245i/imagerunner_3235#DriversAndSoftware

  • Web-Cam: Linux Driver Needed For T400

    Hi all,
    I have Lenovo T400 that works perfectly.  Had Win-7 Ultimate dual-booting with new install of Linux Mint 9 (Isadora).  Decided to delete Win-7 Ultimate.
    Linux Mint OS 9 fully confiqured and running nicely recognizing all hardware except FingerPrint and Webcam device.
    The Fingerprint device is cool, but would like Webcam Device Driver.
    Is there a Webcam driver available for the Lenovo T400?  If so, please reply,
    Warmest Regards,
    ~ digi

    In a terminal as your user:
    [code]
    lsusb
    [/code]
    You will see the device ID code for your camera. Here is mine on ThinkPad Edge: 04f2:b1cf
    You can then do a google search for "Linux web cam xxxx:xxxx" compatibility.  It is likely that the driver is already loaded because of the auto detect function of the kernel scripts.
    You can check that in a terminal as your user:
    [code]
    lsmod
    [/code]
    Look for modules: v4l1_compat, videodev, uvcvideo.
    Neal

  • Printer Driver needed for Windows 8.1 Computer

    I just bought a new computer and I need printer driver for HP Photosmart C4380. I am runing windows 8.1 so I can install my printer.

    @KRS26 
    Welcome to the HP Forums!
    I am here to help you find the drivers for your Photosmart C4380 to install on your new PC.
    Click this link, download and follow the installation instructions and you should have your printer installed in no time: HP Photosmart Full Feature Software and Drivers
    I hope that helps, have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • CS6: Windows 7: Driver needed for Monitor Philips 200 WP7

    A friend and I have spent about an hour this afternoon trying to get an updated driver for my monitor - Philips 200 WP7.   My current driver is 1.0.0.0.     I only recently got CS6, and it says I should ideally update my driver.   Regrettably Philips doesn't supply a driver for my monitor with Windows 7, only with earlier versions of Windows.      Has anyone here updated this driver for Windows 7, and can they recommend anywhere where we can get hold of an update?
    Help would be much appreciated.

    You don't need monitor drivers, the operating system runs it natively (plug'n'play).
    What Photoshop is requesting is an updated video card driver. Not that Photoshop won't work without it, but some (minor) features may be disabled.

  • Coprocessor Driver Need For Pavillion dv6661se Windows 7

    I installed Windows 7 and the device manager informs me that there is no driver for the coprocessor for my Pavillion dv6661se. Where can I locate the driver for it. I looked at the drivers for my laptop but it isn't listed. I don't know where to look for it and the trouble shooter in Windows 7 can't locate it either.

    32 bit or 64 bit? You need the chipset driver which is the nVidia nForce 630a I believe.
    64 bit driver

  • Windows XP LAN driver needed for my Satellite A100-784

    I bought Satellite A100-784 with Windows Vista. I've removed Vista and installed Windows XP (taken from other non-Toshiba notebook)) and then SP2. Now I can't use the internet because there's no LAN driver. The drivers downloaded from this Toshiba site don't work.
    Any solution for me? I expect other problems to appear soon, with the sound and so on. Isn't there any pack of drivers for this model with WinXP?
    (I'd be very happy to get a quick restore disk with Windows XP in English but customer support won't provide any.)

    Hi
    Your A100 unit belongs to the PSAANE series.
    Toshiba European website provides two different XP Intel Lan driver versions:
    1. Intel LAN driver 8.0.43.0
    2. Intel LAN driver 9.2.24
    The first one 8.0.43.0 was designed for LAN Pro100 and the other 9.2.24 for LAN Pro1000
    Additionally I would recommend following the guidelines described in the installation instruction! The drivers must be installed in the right order.
    Please also take a look into another thread about the same theme:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24125

  • Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

    I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
    I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
    I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
    Are there any driver solutions?

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

  • Driver needed for Inspire P580 5.1 surround sound speakers system

    hi
    Can someone help me ASAP...
    I have looked and tried everything possible to find the driver for the Inspire P580 5.1 speaker system but cannot find this and have lost my cd and need this driver as i have re installed windows and lost it...
    can you help me please?

    hi guys
    Thanks for your replies very much appreciated!
    well i have an ATI Readon 9800SE All in Wonder graphics card and also an nVidia nForce2 which i assume is my sounds card...sorry i am not very clued up as you may have guessed..... I have downloaded both drivers and updates from these sites and other things on the same site which i thought would fix the issue but it has not....
    i will however once i get home tonight from work plug in some headphones and see if this works, great idea!
    however for now my speakers are still not working, actually i am getting no speaker display in the bottom right hand corner of my screen next to the time? does this say something to anyone?
    Again much thanks for the help and i will keep trying all your suggestions as well as my own... :smileyvery-happy:

  • WIA driver needed for scanning

    Hi there
    I frequently use my Photosmart 2610 for scanning.  Today, it has started giving me the error message "You need a WIA driver to use this device".  Never had a problem in 18 months so why now?  Where do I download the WIA driver?  
    Many thanks. CTodd

    Hi CTodd,
    Welcome to the HP Forums! I understand that you cannot scan with your HP Photosmart 2610. I am happy to help you with this issue! I have some questions for you:
    What version of Windows are you using? Which Windows operating system am I running?
    Can you make copies with the printer?
    In the meantime, please try the HP Print and Scan Doctor.
    Hope to hear back, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for

  • Nic Teaming in guest OS

    We have 4 ESX Servers each containing 4 gig nics for production traffic. These are teamed to form a 4Gb pipe to the Cisco Switch. Our guest VM's are windows 2008 rc2 and my issue is that i need to find out if its possible to team nics within the wind

  • Error message: Could not complete your request because the file was not found.

    Tonight tried to open images in Photoshop CC 2014. Could not open any. Received the message "Could not complete your request because the file was not found." I installed latest updates yesterday. Today not working. Can anyone assist?

  • Regarding return code 8 while importing trnsport request

    hello friends, i have encountered a problem  while importing a transport request. in log display the message is like this ended with return code 8. there  is a syntax error in line no 5 of saplz_xxx_xxx program. include program lz_xx_xx not found. ac

  • HP Photo Creations - Save as image file

    I've just spent the best part of 3 hours creating two photo collages in this application and cannot for the life of me see how I save the project as an image file. The only option I have found is to save it as a 'project'. Please tell me I haven't wa

  • MAKING FORM OBJECTS REUSABLE AND STANDARD

    I have made a toolbar with all the buttons and PL/SQL codes. Now I have used it in all the forms in my application. Now say for some reason I need to change a property or PL/SQL code, I need to make this change in all the forms. How can I make an obj