HP iLO alerts

I have one HP DL380 G7 server that is in a remote office. Looks like
iLO 3 does not have the ability to send email notifcations, that
appears to be a feature of iLO 4. I've never used snmp, but that
appears to be my only option with this server. Just looking for
suggestions for a simple cost effective method of receiving snmp
alerts from iLO 3 and converting them to an email message so I can get
notified of problems.
Thanks,
Ken

Hi Ken,
KeN Etter;23532 Wrote:
> I have one HP DL380 G7 server that is in a remote office. Looks like
> iLO 3 does not have the ability to send email notifcations, that
> appears to be a feature of iLO 4. I've never used snmp, but that
> appears to be my only option with this server. Just looking for
> suggestions for a simple cost effective method of receiving snmp
> alerts from iLO 3 and converting them to an email message so I can get
> notified of problems.
>
> Thanks,
> Ken
the snmptrapd shipped with SLES (net-snmp package) is capable of doing
so - you set it up to receive all traps and let it call a shell script
for those that are interesting to you. What the shell script does is up
to you - sending an email for sure is within limits
Best regards,
Jens
From the times when today's "old school" was "new school"
If you find this post helpful and are logged into the web
interface, show your appreciation and click on the star below...
jmozdzen's Profile: http://forums.suse.com/member.php?userid=51
View this thread: http://forums.suse.com/showthread.php?t=5272

Similar Messages

HP Hardware alerts via iLO

Well that stinks. I really don't have $400 to spend just to get alerts. Do Dell's include email alerting out of the box with their DRAC remote management, or do you have to pay for it as well?
Thanks for the info Ace

I recently attended an HP/VMware webcast where the HP host said that iLO4 equipped servers were capable of sending hardware alerts via email. I've logged into our iLO on a ML350 Gen8 server, but I don't see the option for this. Can somone please advise on how to do this?
This topic first appeared in the Spiceworks Community

MCS7835-using ilo for managment????

We have several mcs7835's and I want to know if using the ILO ports configured for snmp and for management from CW will work. I dont think so since ILO is not a system nic but a seperate everything. I need back up to say no to this. Any help? documentation not good on configuring this part.

You may use ILO for management. You want to enable iLO for SNMP Alerts.

Filename in an alert message

Hi Friends,
I am doing a simple file to idoc scenario.
if mapping error occurs.
the requirement is to trigger an alert which says "A mapping error occurred when processing the file XYZ.txt"
Constraints are:
1. BPM is not used as it is a simple scenario.
2.RFC lookup during mapping is to be avoided since if mapping itself fails then it will be of no use.
Is there a way/work around to get the filename dynamically in the alert message.
Thank you,

Seems to be not possible without a BPM.....at least by using a standard alert procdure
Using a mapping get the FileName .....have both the source and target message as the same.....
map the FileName to some empty node of the structure.
In the mapping logic, one for which you want to check for any exception, do not make use of the node containing the FIleName...let the rest mapping remain as is
Create a Container Variable and Assign the node containing the FileName to it using a Container Operation.
Then raise the Alert.
I have used a similar approach in one of my interfaces.
Regards,
Abhishek.

Alert is not getting displayed in Alert Inbox

Hi,
We have created a BPM with an Alert. The Alert is getting triggered in the PE but we are not able to see the alert in the alert inbox. It is neither being displayed in ALRTDISP transaction.
We have already subcribed that alert.

Hi,
Have to scheduled the background job SXMSALERT_PROCESS_DATA_GET to collect the alert message for further processing?
check this link,
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
thanks,
sasi

The expression is not being displayed in the alert inbox

Hi,
I have created an expression in 'Long and Short Text' tab present in the ALRTCATDEF transaction screen.
The expression is "test Error in message &SXMS_MSG_GUID&". However if i goto alert inbox, this expression is not getting displayed. I tried putting this expression under Message title, Short text and Long text tabs. But no change in the result.
In the above expression, SXMS_MSG_GUID is a container variable declared in ALRTCATDEF transaction screen.
Same is the situation irrespective of the container variable being used - SXMS_ERROR_CAT etc.,
I appreciate your early response.
Regards
Ganesh

Hi Venkat,
Without using BPM, you can think/try out with triggering an alert from UDF:
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
Otherwise, you can use email functionality to notify the error message rather an alert....so that you can customize your output format/or error message required.
Also check out this Michal's blog on ALERT Configuration..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Hope this wull help.
Nilesh

Alert or Notification for Client Open and Close

Hi All,
How to configure an Alert or Notification, if the Client (SCC4 and SE06) is open and in modifiable state, we have spoken to our solman team and got the confirmation that there is no MT Class for SCC4 and SE06.
If this is possible through any z program, please do help and provide your comments and suggestions.
Thanks & Regards
Praveen

It is possible to assign a different posting period variant to company code in a non-leading ledgers (the extreme right field) in the foll. node in SPRO.
Financial Accounting (New) -> Financial Accounting Global Settings (New) -> Ledgers -> Ledger -> Define and Activate Non-Leading Ledgers

Is there a way of getting a list of upcoming alerts/alarms and their times?

I'd like to get a list of alert times, so that I can see if I have any that will be going off in the middle of the night!
Many months back, I purged those pesky midnight alerts by scrolling through week by week and looking for the all-day events and checking each one. It was a chore.
Now, due an odd synching issue between iCal and an app, I'm a tad concerned that some late night alerts may have been set, or PMs may have changed to AMs, or other oddities introduced. I'd like to scan a list of alerts for the next several months to ensure that none are set to go off during the sleeping hours!
Just browsing events (say week by week) doesn't help me because they could have alerts set for all sorts of different times (or no alerts at all). If there isn't a way of listing the alerts, then I'll have to go through each individual event/to do to check its alert and time-- and there are hundreds!
Hope this makes sense.

Try this in Script Editor - the list of alarms will be in the result pane.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iCal"
set Alarming to ""
set MyCalendars to every calendar where writable of it is true
repeat with ThisCal in MyCalendars
set MyEvents to events of ThisCal
repeat with ThisEvent in MyEvents
repeat with ThisAlarm in (display alarms of ThisEvent) & (sound alarms of ThisEvent)
set AlarmTime to (start date of ThisEvent) + (trigger interval of ThisAlarm)
set GotOne to ((name of ThisCal) & ": " & (summary of ThisEvent) & ": " & (start date of ThisEvent as string) & " alarm " & trigger interval of ThisAlarm as string) & " minutes."
set Alarming to Alarming & GotOne & return
end repeat
end repeat
end repeat
end tell
Alarming
</pre>

How to change default alerts in iCal?

Hello.
Every time you add a new event in iCal, the Info panel of the event contains a series of default alerts that you may want to add to it. However, all of them are useless to me (e.g.: "Send email to <my address> 4 days after), so I need to manually edit them event by event. Anybody knows how to change them? I have already inspected all the plist files related to ical, and looked inside the ical package content, but I found no indication of where to change these values. Using iCal version 5.0.2
Thanks,
l

John: Thank you, this is exactly what I wanted. I was indeed inspecting the plist with bbedit, but what I did not realize is that the file has some parts which are binary, so I could not see the PersistentMenu-lastUsedAlarms part by using a text editor. I opened it with Xcode and I did find what you were saying, and erased all the junk that was in there. In fact, the issue I had was also described here:
http://newsgroups.derkeiler.com/Archive/Uk/uk.comp.sys.mac/2010-06/msg02349.html
For some reason, it looks like after some upgrade the program adds were some positive values in the plist and I was stuck with default alarms that were set *after* the events I wanted to set an alarm for.
I did what you suggested, then added by hand new values to the PersistentMenu part of the plist, and I am now happy.
For everybody's information, to know what I did, it is enough to know to add Dictionary items to the PersistentMenu-lastUsedAlarms, with 3 fields:
-- AlarmTypeKey (this determines if you want a sound, or else an email, or else the other default alarm type keys. For example, sending an email is a Number, value 4; having a message with sound is a Number, value 3)
-- AlarmDurationKey: This is a Number, in seconds, that determines when you want your alarm to trigger. E.g: -172800 will be two days before. Must be negative for "before", of course)
-- AlarmParameterKey: This is a String, where you store the value that you want the alarm to have. For example, if you want an email to be sent, the AlarmTypeKey will be 4, as explained above, and this field will contain your email address. Instead, if you want the alarm to be a sound, the AlarmTypeKey will be 3 and this field will have the name of the sound you want (e.g., Basso).
That's it. Thanks a lot for the solution!
l.

Why is ical creating unwanted alerts for all-day events?

If anyone can point to what might be going wrong here I'd be grateful. This is becoming a daily irritant. I have a number of all-day events listed for most week days in my diary which help me to know what is happening that day with childcare for my son. I don't need alerts to be reminded of these - they are just notes I put to myself in adavnce that let me know how my day is configured. Now, I sync my ical from my home imac to my work imac, my macbook, my iphone and my ipad. On none of these devices do I have default alerts set. I never set any alerts for any of these 'events'. But then, at 9am the day before each one I get an alert. In fact, I get a 9am alert for any all-day event, regardless of whether I set an alert for then, or at all. As I say, I've checked all devices and the default alert a=on all is set to 'none'. Does anyone know why this is happening and how I stop it?

Thanks Malcolm.I'm afraid this issue started for me after updating to iOS6!

How can I remove calendar alerts from my iPhone?

My iPhone 4 (iOS 6) seems to be adding calendar alerts on its own and I cannot for the life of me figure out how to remove them. I use iCal on my Macbook Pro (running Mountain Lion 10.8.2) to sync my calendar events. None of my events on iCal have alerts set to them and I have disabled all alerts in my iCal preferences. Yet, for some reason, when I look at a calendar event on my iPhone, an alert is set for it.
How do I remove these properly? I do not simply want to silence these alerts, but figure out how they got there in the first place and remove them completely. For comparison's sake, I've included an image of the event from iCal and the event from my iPhone.

Hi pjdemeo,
I understand you want to delete all of the photos from your iPhone. As a precaution, I would suggest importing the photos and videos from your iPhone into your computer. This will give you a backup for the images, and after import you will be asked if you want to delete the photos.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
https://support.apple.com/en-us/HT201302
The iPhone User Guide has instructions for deleting photos directly from the device:
Organize photos and videos - iPhone
http://help.apple.com/iphone/8/#/iphf14943e
Delete a photo or video from Photos. Tap the Photos tab, tap the photo or video, tap , then tap Delete Photo or Delete Video. Deleted photos and videos are kept in the Recently Deleted album on iPhone, with a badge showing the remaining days until the item is permanently removed from iPhone. To delete the photo or video permanently before the days expire, tap the item, tap Delete, then tap Delete Photo or Delete Video. If you use iCloud Photo Library beta, deleted photos and videos are permanently removed from all iOS 8.1 devices that use iCloud Photo Library beta with the same Apple ID.
Cheers,
- Judy

ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT

We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client.
We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bam_odi.htm#BABEJIGD
We have started ODI Agent, soa and bam servers. Created a BAM alert -> select action - Run ODI Scenario -> selected the same scenario.
Alert ran at scheduled time but failed with following error:
java.io.IOException : truncated data integrator frame received
Error Message (if any)
[2012-08-06T11:24:21.046+05:30] [bam_server1] [WARNING] []
[oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
OracleSystemUser] [ecid:
3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
oracle-bam#11.1.1] EventEngine: Error occured while running a ODI Scenario.
[2012-08-06T11:24:21.250+05:30] [bam_server1] [ERROR] []
[oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
OracleSystemUser] [ecid:
3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
oracle-bam#11.1.1] EventEngine: Action exception: EEInstEv2 EEInstAct1 Rule
Id: 2 exception: java.io.IOException: truncated Data Integrator Frame
received
[2012-08-06T11:24:21.250+05:30] [bam_server1] [WARNING] []
[oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
OracleSystemUser] [ecid:
3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
oracle-bam#11.1.1] EventEngine: Exception stack trace: [[
at
oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScena
rio.java:145)
at
oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionP
rocessor.java:891)
at
oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(Actio
nProcessor.java:337)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
ava:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
at
oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.proc
essWorkRequest(ThreadPoolController.java:155)
at
oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(
ThreadPoolController.java:128)
at
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java
:886)
at
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908
at java.lang.Thread.run(Thread.java:619)
Any help on this is highly appreciated...
Thanks
Rajdip Mukherjee

Hi,
Forgot to include the ODI classes RunScenario.invokeScenario() is invoking odi scenario using odi sdk api. Please see the below stack trace :-
java.io.IOException: truncated Data Integrator Frame received
at
oracle.odi.sdk.invocation.internal.AgentNetworkCmd.readCmd(AgentNetworkCmd.java:303)
at
oracle.odi.sdk.invocation.OdiInvocation.invokeCommand(OdiInvocation.java:176)
at
oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScenario.java:140)
at
oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionProcessor.java:891)
at
oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:337)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Thanks
Rajdip Mukherjee

Display an Alert message in PL/SQL block in APEX

Hi,
we are getting an oracle exception while inserting a new row. As it is having the unique constaint on a coulumn.
Now the problem iis we need to Display an "Alert message" based on the input field validation. That java script code for alert has to be embeded nside a PL/SQL block in Oracle APEX Application.
we tried doing this with below code:
Begin
INSERT INTO <<table name>>(ID,NAME) VALUES (s1,:TXT_s2);
exception when others then
htp.p('<script language="javascript">');
htp.p('alert("Exception");');
htp.p('</script>');
end;
If anybody knows .... please reply.
Thanks,
Subarna
Edited by: user9955252 on Apr 21, 2010 1:47 AM

Hello,
APEX Forum is here : Oracle Application Express (APEX)
Regards

An alert message observered while appling latest patch MLR 10

Hi Gurus,
While applying latest patch MLR10 we observed an alert message as below
"Creating log file "C:\oracle\midtier\.patch_storage\8404955\Apply_8404955_05-21-
2009_15-44-27.log"
Conflicting patches: 8204237,
Patch(es) 8204237, conflict with the patch currently being installed (8404955).
If you continue, patch(es) 8204237, will be rolled back and the
new patch (8404955) will be installed.
Note: If the patch currently being installed (8404955) is rolled back,
it is recommended that the fixes being rolled back here (8204237, ) are reinstal
led.
If a merge of the new patch (8404955) and the conflicting patch(es)
8204237, is required, contact Oracle Support Services and request
a Merged patch.
Do you want to STOP?
Please respond Y|N
Should we rollback the previous patch before applying MLR10 ? or can i continue with patch application ?
Thanks in advance,
Regards,
Cema

Please continue the MLR10 patch installation, this message would appear for the all patch installation (of course, patch number would be different though).

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

HP iLO alerts

Similar Messages

Maybe you are looking for