HP installer will not detect networked LaserJet MFP M1536dnf just on some PCs

Hello,
this printer/scanner was working fine (printer still works fine via a Windows print server). Then scanning (via network) stopped working on one PC (Windows 7).
Tried to uninstall drivers / HP software and reboot. Then tried to install again - HP Installer will not detect printer on the network no matter what. I can ping the IP of this printer, access its web interface without any issues on the same PC. Tried specifying IP address in the installer - does not detect, the same issue with MAC address. 
Had a Windows 8 machine with drivers / software installed on it, tested - scanning still worked fine on that PC. Tried to remove HP software to see if problem will appear. And it did! I cannot install the same software package which I still had in downloads - it will NOT detect the printer on network.
Upgraded printer firmware - no change, even though I don't expect this to be a printer issue as it worked fine until I have uninstalled software on this W8 machine.
Tried using HP Scan & Print doctor. That thing doesn't see printer/scanner installed and only suggest to download and install software which is not helpfull at all.
I also tried extracting HP installation files and finding *.inf files which could be used to add scanner via Windows directly, but haven't succeded with that (I would also be not sure how to specify network IP address in such a case anyway).
Any help is MUCH appreciated. We are kind of stuck...
Thanks!

Hi,
Run some diagnostics and see if any issues are discovered.
There have been reported issues with the NVIDIA 650 with some of the HP PCs. Additionally, most models of the NVIDIA 650 require a 400 watt power supply as the minimum and some models require a PCI six (6) pin power connector which the 300 watt power supply in your PC is not provisioned.
There is a BIOS update posted for your PC so you might want to consider installing that update.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

  • My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

    My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

    The following may have something that will help: http://support.apple.com/kb/TS1398

  • IPad2 won't sync with iMac...only my iphone4 shows in the device window on my iMac.  For some reason it will not detect my iPad via my wireless network!

    iPad2 won't sync with iMac and only my iphone4 shows in the devices window on my iMac.  For some reason it will not detect my iPad via my wireless network!   The iPad will sync when plugged into the Mac however looses connection and disappears from the device window when unplugged.

    Jayplus wrote:
    I have a D-Link WBR-2310 and already bought an external antenna which cost me additional. Besides moving my iMac, what options do I have?
    You already have a wireless router or have just bought one, or do you have an ad hoc connection from iMac to AppleTV?
    If things worked in the other location this all point to poor network performance/connectivity. It may be the connection is intermittently lost - small files transfer ok, but interruptions during longer transfers scupper the process.
    Interference from cordless phone bases or microwaves (and neighbours devices) might also cause connectivity issues.
    Signal strength bars are often not that useful, but will indicate connection to the main wireless device they connect to - so AppleTv may have a good connection to the router but a poor iMac connection to router is not displayed by AppleTV which only shows the connection to the first device in the chain.
    You could consider some home mains newtorking plugs such as those made by Devolo but they usually have to be on the same mains ring.

  • I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

    I have a perfectly good wi-fi setup but it will not detect my Aiport Express no matter what aI try. Help!

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • Windows 7 does not detect network hardware

    Using Boot Camp, I installed Windows 7.
    After restarting the computer it does not detect network hardware.
    So I cannot connect to my Wifi.
    What should I do?

    Did you download and install the Windows Support software? It was the first menu item when you ran Bootcamp Assistant. If not, run Bootcamp Assistant again and select the menu item to download the Windows Support software. Read the Bootcamp Installation Guide. http://www.apple.com/support/bootcamp/

  • My ipod touch will not detect any wifi signals but other devices are connected to the wifi; please help!??

    My ipod touch will not detect any wifi signals but others devices such as my laptops; do connect without a problem. I restored my ipod and updated it and still no wifi signals are being detected.

    Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again.  After that it shou,d save your device

  • HT1386 iTunes will not detect my iPhone(5s) after the most recent update.

    Ever since i updated iTunes it will not detect my iPhone, every time i plug it in it asks to trust the computer which I always use to sync my iPhone. Every time i select "trust this computer" and it still won't detect it. PLEASE HELP.

    Hello fercho965,
    Sorry to hear that your iPhone is currently not recognized by iTunes.  I found an article with steps you can take when you experience an issue like this.  I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • My imac will not detect external monitor after recent update. Is there a way to fix this?

    I have a VGA monitor plugged in to my imac using the VGA adapter to the mini-DVI.  All was working well.  Since I updated over the weekend, the computer will not detect the monitor.
    Any ideas how to fix this?

    Pcantin wrote:
    I have tried another VGA monitor and that failed as well.  Since you don't think the update was the cause, it may be that the adapter I am using decided to call it quits.  I will see if I can find another and test that out.
    I will look into the external drive idea as well.
    Thanks for your help on this.
    I didn't think about the adaptor, but you should at least visually inspect both the adaptor and the cable at both ends. If one or more pins got bent even slightly the connection might fail. The cables can also fail internally. Replacing the adaptor and cable may be the quickest thing to do initially. If you want to try to save money, first replace the adaptor, and if the problem persists, then go replace the cable (or vice versa).

  • On a windows 7, ifinally got the Iphone4 setup so i can copy my pictures off of the phone. know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    On a windows 7, i finally got the Iphone4 setup so i can copy my pictures off of the phone. Know itunes will not detect the iphone to get it synced. how do i get it back to be seen by Itunes?

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • IPod 4th gen grayscale will not detect usb connection.

    Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
    I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
    Does anyone have an answer to this riddle?

    A bad USB hub will cause the problem ... are you using it ??

  • Windows 7 installation will not recognise the Bootcamp disc!

    I have a 2008 Macbook running Snow leopard.
    Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
    Any ideas
    Thanks in advance

    If you used your Leopard DVD then it won't work.
    As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
    Stefan

  • I just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

    i just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • I just purchased Adobe Photoshop Elements 13 but my computer is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption

    I just purchased Adobe Photoshop Elements 13 but my PC is not recognizing my CDRom and I cannot download the program. I tried copying the files on the program disc to my hard drive but get a message the installer will not work. I have the redemption code and serial numbers. Can I download the program online somewhere? If I download a trial version for instance will it allow me to enter my serial number and use it for the full program?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT1386 Itunes will not detect any of my devices

    Itunes will not detect any of my devices.  Any suggestions?  I've shut down and restarted, turned devices off and on.  Not sure what else to do.

    Hello, bone61. 
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.  If the issue persists try all remaining steps. 
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • Have literally tried everything and iTunes will not detect iPhone

    Just bought a new macbook and am having some serious issues with iTunes.... My iPhone was detected the first time i plugged it in, but now it will not detect it. As soon as i plug my phone in, iPhoto pops up but iTunes does not. When i open iTunes, my phone does not show up. I have done all the troubleshooting, restarted both phone and laptop, re-installed iTunes (when i did this, it worked again for one time, then when removed and re-connected it failed to detect it again)
    Everytime i plug it in it charges, but iTunes will not find my phone. someone please either help me or shoot me because its driving me INSANE!!!!!!! i followed every step that apple says to do and have also looked at other peoples answers and nothing is fixing this!!!
    thanks in advance

    try if the suggestions in this thread work for you: http://discussions.apple.com/thread.jspa?messageID=11434988&#11434988.
    JGG

Maybe you are looking for