Hp l7680 with static ip 192.168.0.99 with 2 networks does not work.
I have a router provided by BrightHouse networks that I cannot administer. It is connected to the in-house wired network
and IP network is 192.168.0.xxx. I have assigned a static IP of 192.168.0.99 to the HP Printer.
I have another router, Netgear N600 WNDR3700v4, that I use for my wifi and it has a network of 192.168.1.xxx.
I cannot print from the wifi network subnet but I can print when I am directly connected to the Brighthouse router. From a PC connected via WIFI, I can ping the printer @192.168.0.99 , and "telnet 192.168.0.99 9100" connects. I have run HP Print and Scan doctor from a wifi connected pc and it says everything is OK, however, the print jobs just stay in queue and it says the printer is dicsonnected. I used to have an older Netgear wifi router (N600 WNDR3400) and everything used to print. Is there some config I need to do in the WNDR3700v4?
Did you have the old Netgear router setup as an access point for the BrightHouse gateway?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
Similar Messages
-
resizing with my mouse using touch pad mac book pro does not work. how can i correct this problem?
See:
* [/questions/777886] -
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
My display screen is dim and the contrast control does not work. There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it. Does anyone know what's wrong?
There is a sign on the screen that I have been unable to identify. It is a white circle outline with a half moon solid circle within it
That would be a screen contrast symbol
My display screen is dim and the contrast control does not work.
Did you reset the PRAM? http://support.apple.com/kb/ht1379 And the pram battery may need to be replaced if it is over 3 years old it is under the iMac under the ram cover and there is a little button in there to reset the pmu as well. you have to have it pluged in when you do a pmu reset. there is a lot more stuff to try before the worst case scenario that is a bad PAV board the Pav is what runs the monitor and if it is going bad That may be a syptom that it is haveing and they can not be fixed (Well not for under $250 and that is useing old parts because they do not make them any more) but that wood be worst case scenario. Lets just hope it just needs to be reset Try that and Keep us posted -
File & folder sharing with privileges on my network does not work. What is wrong?
My Timecapsule is creating a network between my iMac with OS 10.7.5 and my Macbook Pro Retina OS 10.9.2. I am trying to setup a folder on my iMac with controlled access privileges to work as a server for others using the Macbook as a client. I followed different tutorials to the letter, but it did not work, I could not get the connection. Then I called the Apple help line. It turns out that just setting it up with a 'sharing only' account etc. in 'sharing ' in the 'system preferences' is not enough. One also has to set up the same priviliges in the 'get info' window of the folder directly at the same time...so a double setup. They could not explain properly why and there is no mention of this whatsoever in any tutorial I found on the internet. Anyway, I tried that and it still did not work. When I add the user in the 'get info' window and press enter, suddenly the user does not show up in the privilege box with the user name but instead a line saying something like "searching for user" and something small dudeling next to it......I called Apple again. After two agonizing hours on the phone where I was treated like an imbecile it turns out one has to somehow go through the address book ??? Why, I have no clue and how, I do not remember, but suddenly it worked.
Anyway, now two month later I had to add a new user account to my Macbook and I need to give it access to my server folder on my iMac. Well same problem again. I cannot remeber what we did 2 month ago an cannot call Apple, because my service period has expired. I tried myself and got the dudle in the folders 'get info' window again. Then by mistake I deleted myself as the only administrator account on the Imac from the access privileges to that shaered server folder. When I tried to put my account back into the folders privilege settings I got the same message and the dudeling thingy there too. Frustrated I thought it is best to just re-start the computer.......that was the end of it all: Now the startup window does not show my account name and icon anymore, just two lines to fill in the account name and password. The upper line has an arrow pointing left, the lower for the password an arrow pointing right. I filled in the account name and the password....the dudle circle comes and nothing happens, it seems to crash. When I click on the arrows the sign-in lines disappear, only the three buttons for going to sleep, re-start and turn off at the bottom are the only items left on the screen. I tried 10 times to no avail. This is turning into a nightmare!! My account is the only user account on this iMac.......
What am I doing wrong? Or what is wrong with my iMac?
Why is there nothing mentioned about these issues in the tutorials or anywhere else? Why do the tutorials say it is so easy, when even the staff on Apple's helpline cannot figure it out without having lengthy side conferences with their co-workers and managers???
Does anybody know what I have to do again with the address book to add this external 'sharing only' user account to the folder's privilege settings?
I assumme I have to re-boot my computer tomorrow and restore it from the Time Capsule. How do I do that? I cannot log in????
With the setup I had working for the last two month there were still issues with acces conflict to new subfolders and files inside the shared folder between me and the Macbook account user. I have read that the solution is to create a group and give the group access privileges to the folder. However, I could not find any details on the exact steps to follow. I need the exact steps, otherwise this will turn into the next nightmare. Where can I find this info.
I would really appreciate your help with answers and solutions to these complex issues
Thank youcheck out managed datasources in the manuals
-
iPod Touch 4g home button won't work plus will not charge properly
Take it to a reputable third-party repair shop. Apple will not touch it after you have opened it up and tinkered with the works.
-
With ios 7 installed 2 days ago on my iphone 4 and on my ipad 3rd generatiion it is not possible to switch the photo camera to video camera . What is the problem ? Did someone meet the same problem ?
Did you try swipe up and down to change?
-
Blootooth keyboard auto capitilisation
cor-el...I cannot thank you enough!!! It took me a while to wrap my mind around your solution to my problem as well as to have the confidence to attempt what you had instructed me to do. After reading your instructions many times it finally made sense to me as to what I needed to do and not be afraid of making changes in my computer for fear I may do something wrong. After following your instructions and making the change I am now able to use the plugin that works with imikimi.com. Have a great day!
-
Problem with activation of Office 2010 Professional, 'help' web link does not work
I am having problems activating a copy of Office Professional 2010 purchased retail. I am being told that the product key is not valid, though I have re-entered it twice. I click on the 'more information' link but the page doesn't load: http://wwwppe.dns.microsoft.com/howtotell/geo/content.aspx?pg=geo_off&displaylang=en?ERR=0xc004c003&LCID=1033&MSG=4&PID=02257-210-6072776-49466&ErrorCode=0xc004c003
Please advise what I should do.
ThanksCould you please follow the instructions below, run the commands in green, and paste your output?
Open anelevated command prompt
a.The
path below is the default install path, so it may be different if you've customized your install
b.If
you’re using 32b Office on a 64b OS, you may need to run it from the “Program Files (x86)” folder
c.Start,
search for ‘cmd’, right click on the command prompt window and select “Run as administrator”
d.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /dstatusall
Trigger activation
a.Launching
an Office application will then prompt you for activation via the UI. Alternatively you can trigger it using this command:
b.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /act
Check the status
a.The
following command will show the licensing status. Alternatively in the Office UI you can view the status by clicking File, Help.
b.cscript
"%ProgramFiles%\Microsoft Office\Office14\ospp.vbs" /dstatusall
Ted Way [MSFT], Program Manager, Microsoft Office: Enterprise Licensing, Group Policy, and 64-bit Office -
The hot key (ctrl + alt + key) does not work. This is in Windows Vista.
Thank you Morbus and Cor-el, for your prompt replies. Here's what I did: I've placed the Firefox icon in the quick launch toolbar. So I right-click this firefox icon>Properties>Shortcut tab>in Shortcut Key field, add X (the word "None" changes to "ctrl + alt + X")>Apply>Okay>and that closes the dialog window.
Then, to try the new launch short-cut, I press and hold down, in order, ctrl, then alt, then x (holding all three down) . . . and nothing launches.
I thought this would do it! So any further thoughts would be a splendid help ---- many thanx! -
I have just upgraded to Lion and now my VPN connection does not work properly. It was working fine when I was using Leopard. The VPN is My Private Network and we use it to link to BBC iPlayer when abroad. It will actually connect to the VPN site and shows a UK IP address, but then when we try to load an iPlayer programme we get the message from the BBC that we are not in the country and, therefore, cannot access the site. Any suggestions?
Have a look at System Preferences, Accessibility, VoiceOver.
(Command - F5).
charlie -
I am sad, I have days trying to use Airdrop, my friends can see me, but I can not see them. I turned on my Wi-Fi, Bluetooth and I selected the option "available for ALL".... and nothing. I can receive photos from my friends... mean It work for them. I just restarted the phone to the basics configuration but it does not work, my phone still does not recognize my contacts.
warranty will cover it. Did you try only by changing the power adapter or did you change both cable and power adapter?
if you did the latter, see this page: https://www.apple.com/support/iphone/repair/battery-power/
you'll be able to contact Apple Support from there. -
Batch processing does not work with action
Here is the thing. I have implementes several action on Photoshop. SOme of the include several sub actions and different saving locations. For example, I open a file, then I hit my prefered key combo for that action, and I have:
1) convert to cmyk
2)save copy as JPG with 11 quality level
3) save to folder A
4) image size to 72 dpi
5) covert to RGB
6) save as JPG 6 quality level
7) save to folder B
8) close file and discard cahnges.
Everything runs like heaven, but the moment I want to batch several files everything stalls.
I choose file > Batch > Choose my set > choose my action
Source > I choose where my files are (usually a PDF)
then I use "Supress file open options dialogs"
Destination> Since I already have set destinations y my actions, I choose here a "dump" folder
On errors > I hit Save As... and put a name for that log.
Then photohop opens my PDF on Photoshop and does nothing! It keeps my file open.
I m gettting frustated here, because I ma about to work with 400 files to batch, and this batch system does not work.
I am using CS6
Any cluesYour action doesn't to seem to include any Open actions. Why do you have the "Supress" option enabled?
Also, since your action has the two save commands, you would just leave the Destination set to None. Setting a Destination means that is going to save the files again.
The problem you'll run into though is that the action also saves the file name as part of the action, so that you'll end up just saving over the one file each time the action is played back on your 400 files. So Photoshop will process all the files, but each time it will overwrite the first file, so you'll end up with one file in each folder. Normally, in these situations, you'd use the Destination setting and use the "Overrride Action "Save As" Commands", which would substitute the Destination folder for whenever a Save command is used. The problem here is that you can only choose a single destination folder, so all files would be saved to the same location.
Short of scripting this, it may be best to break this into two separate actions. -
Eprint does not work with 5510 D
I have tried several email addresses to associate with my 5510 D but the e-print feature does not work with any of them
Do you already have ePrint set up on your printer?
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
I've read through tons of posts and still no solution. I have powered everything on and off. I've tried firefox, safari, and netscape. I still cannot connect to 192.168.1.1 I have a befw11s4 v2. Along with not being able to connect to the setup page, my internet signal strength goes up and down constantly even though I am right next to the router.
If something does not work there is usually an error message which explains the problem. Please post the exact error message you get.
When wired to the router, open a terminal window and enter "ifconfig en0". Please post the output of that command.
Next enter "ping 192.168.1.1" and post what happens. Again, if there is an error message post the exact error message.
Maybe you are looking for
-
I have a 2 year old HP Pavilion Elite i7 Desktop w Windows 7 and I desire to add a 3 TB Hard Drive. Can I add a 3TB Hard Drive (probably the Segate Barracuda XT 3TB HD) as a secondary drive without changes. If not, what should I do? HP=Pavilion Sys
-
Payment terms in vendor invoice posting
Hi all, When using FB60 to post vendor invoice, I can't see payment terms and discount information under "payment" tab. I had create payment terms in IMG, and assigned it to the vendor master record. Do I miss anything? Thanks for the help! YuLin
-
Nothing is going from my external hardrive into my trash (run on a network)
Hello We use one external hardrive between four of us in our studio, run on a network. I am trying to delete stuff from the hardrive, but anything I put in the trash is not appearing there. Some of the time it says its because the file is in use - wh
-
Call Library Function Node produces error in Windows 7
Hi, I've created a simple program using LabVIEW 8.5 that uses calls in winscard.dll to read and write to a Smart Card. I use Call Library Function Node to call functions in C:\Windows\System32\winscard.dll. This program works without a proble
-
can anybody explain if i want to see the all the movement types with respect to G/L account what will be the T-code.