HP L7780 Officejet Pro printer Column gridline through pictures.

Have L7780 Officejet Pro, all alignments and test pages show good as well as printheads, there are no error msgs. Yet when printing Word documents with pictures, there is a 3 inch long column with ruler grid lines through the pictures. Using Windows Vista. Please help

Hello-
I think it might be a setting in Word. Which version of Word are you using ?
This is a photo with "artistic effects"
Do the lines show up on print preview ??
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
Donald

Similar Messages

How do I print standard 6 3/4" standard size envelopes from an hp 8600 officejet pro printer?

How do I print 6 3/4" standard size envelopes from an hp 8600 officejet pro printer. This printer has this size on the tray and has this size listed in the printer set up on the printer, but the drop down boxes from my computer to set up the printer do not have this standard size listed. I keep getting messages on my printer that it is not set for the right size. I have a list of supported envelopes and their numbers for this printer but which one of these other numbers is the same as the 6 3/4" standard size envelope. I have an operating system of windows 7 with an older version of publisher. Everything else prints ok from publisher & the printer, just not the standard size envelopes of 6 3/4".
Please help!
indy-girl

Hi indy-girl,
Welcome to the HP Support Forums! I see you are trying to print 6 3/4" envelopes from your HP Officejet Pro 8600, but keep getting an error 'printer that it is not set for the right size'. After taking a look at the Supported envelopes sizes, the 6 3/4 is not supported. See below:
I was able to take a look at the 8600, the only thing I am seeing listed on the paper tray is Legal/Letter, and the 4x6". I am not seeing the 6 3/4 size.
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

8500 officejet pro printing isues

My 8500 has not printed well in black after the first month. I have lines through black print on 2 or 3 lines per page. Those line are not readable. I've tried everything the trouble shooting recommended numerous time. I've wasted so much ink trying to fix this I've given up a started printing to an old printer. This has been nothing but trouble and frustration for me.

Hi Windsprints,
Welcome to the HP Forums.
I see that you are having some issues when attempting to print in colour.
I have located a document that deals with Fixing Print Quality Problems for the HP Officejet Pro 8500A e-All-in-One Printer Series.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP 8600 Officejet Pro print light/dark control

HP 8600 Officejet Pro e-All-in-One
Windows XP
Is there any way to darken the black print on my machine? The copy feature offers this feature but I can't find anything for printing purposes.
This question was solved.
View Solution.

The only option to darken the text is to change the print quality to its highest setting. To do so, please follow the steps listed below.
In the software program you are trying to print from, click File, and then click Print . The Print dialog box will open.
Select your product from the Name drop-down menu, and then click Properties . The Properties dialog box will then open.
Click the Paper/Quality tab.
Under Quality Settings you will be able to increase the print quality.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Broken letter tray flap on Officejet Pro printer

Is there anywhere to buy a replacement part for the Officejet Pro 8600? I checked HP's replaceable parts list for this printer and don't see the part I need. It's a plastic part that pulls out and stops the paper from flying out when the paper is coming out of the printer. It has a flap that you can flip up, to stop the paper and keep it in place once its printed, or you can flap it down. It snapped off and don't know where to get a replacement.
This question was solved.
View Solution.

It's called the output tray.

L7780 Officejet c9382A print head

I have a defective c9382A print head that is still within warranty. I need an address to which to return it. I have spoken to a few Customer Care Support folks that seem to be clueless. Does anyone know an address?
This question was solved.
View Solution.

hi john
maybe you will find usefull these tips for returning goods within warranty period.
http://store.hp.com/webapp/wcs/stores/servlet/ContentView?eSpotName=ReturnsandExchanges&catalogId=10...
From out of Nowhere

Officejet Pro 8600 capability to save pictures from an SD card on my computer?

I can read the pictures from SD card onto the printer, and print them using the SD slot provided on the front of the 8600 printer. However, I also would like to save the pictures in a folder on my computer. Is this possible with the 8600 printer?

Hi,
Is your printer on your home network ? If yes, mapping card reader on the network should help. Please use the following instructions:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00149194
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro 7680 all in one printer

I have a 7680 officejet pro printer which is not fully printing the black text on print jobs which are not set to " fine" on the print function. I have replaced the cartridge and tried several times to clean the printhead using the machine's "clean printhead" function. Is there a way to manually remove and clean the printhead using some type of solution or tool? do I need to buy another printhead?

If the printer has an ethernet port, try using it instead of USB printing. Usually faster and more stable. We have an HP 6280 AIO wired via ethernet directly to our Airport Extreme base station. It is printing for three wired Macs and two wireless. Rock-solid, even on the G4 MDD which has a tendency to exhibit sleep problems with some USB devices.
A standard cat5 patch cable should be all you need. You may need to change the connectivity settings in the Printer System Preferences, but I suspect your OS will recognize the printer immediately.
If your computer has an ethernet port, it may be fitted with a yellow plastic shipping protector that will need to be removed to expose the port.

Cannot print to HP Officejet Pro iPad can't find printer?

AirPrint working well from my iMac but my iPad can't find it! ( even when I am next to it!)

Which OfficeJet Pro printer is this? What is the specific model?

Extra line running through the screen on my Officejet 6500 printer

I just noticed a second horizontal line running through the screen on my Officejet 6500 printer screen (right through where the ink levels show up.) The screen resembles graph paper. What causes this? Is there something wrong with the machine? Can something be done to correct it?

Hi there,
A full factory reset may not be required. Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet pro 8500A connected via wireless, but not accessible....

I can t access my officejet pro printer via wifi, after a firmware upgrade last week. I can print however from my iPad, but not from my laptop. Both are connected to the same wireless signal. I can see in my printer and router that both are connected. When I connect the printer via a cable to the router, it works.
As said, I lost this after firmware update.
I tried:
Update the software on my laptop : no Improvement
Switch on/off the router, printer, laptop : no improvement....
Can anybody help? Would a downgrade offirmware help? Anybody familiar with this problem?
Laptop : W7-64

The workgroup shouldn't matter. It's strange that the printer will communicate with the laptop as long as one of them is connected via Ethernet to the router. It shouldn't be doing that at all. It has to be something in the router. I know you mentioned using a different router and it worked just fine. Problem is I'm not sure why this router isn't working right. I'm sure the printer is out of warranty, which is why I'm sure you came to the forums first, but you may need to contact HP tech support. They should be able to remote in and find the setting that's blocking communication. II'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
HP Technical Support Case Call Form
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Scanning multiple pages on hp officejet pro 8620

where is the setting to make officejet pro print mulit pages?

Hi,
The following lines are from a 268 page manual:
Scan
You can scan documents, photos, and other originals, and send them to a variety of destinations,
such as a folder on a computer.
Using the HP printer software, you can also scan documents into a format that you can search, copy,
paste, and even edit.
NOTE: Some scan functions are only available after you have installed the HP printer software.
TIP: If you have problems scanning documents, see Solve scan problems on page 137.
● Scan an original
● Scan using Webscan
● Scanning documents as editable text
Scan an original
Using the Scan menu on the printer control panel display, you can easily select the location of the
scanning :
● Scan to a computer
● Scan to a memory device
NOTE: The printer must be connected to the computer and be turned on.
NOTE: If you are scanning an original from the printer control panel or from your computer using the
HP printer software, the printer software provided with the printer must be installed on your computer
prior to scanning. In addition, on Windows computers, the printer software must be running prior to scanning.
NOTE: When scanning a borderless original, use the scanner glass and not the ADF.
Scan to a computer
NOTE: To scan to a computer, make sure the feature is enabled.
(Windows) Open the HP printer software, go to the Scan section, and then select Manage Scan to Computer.
(OS X) If you installed HP Scan, open HP Utility. Under Scan Settings, click Scan to Computer, and ensure that Enable Scan to Computer is selected.
Now, to scan multi pages, please try:
Double click printer icon on desktop,
Select Scan a Document or Photo,
Put the first page on the glass (face down),
Check options (size, dpi ...), and select Scan document to file,
Click Scan - machine will scan the first page
Remove the first page on the glass, put the second page,
Click + (plus sign) It sits on the left hand side of a red x
Machine will scan the second page, put 3rd mage on the glass and click + again ..... to the end then click Save
Click Done after Save
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

HP Officejet Pro L7780 All-in-One -
Issue:
Blue ink will not print (It prints the color pink instead.).
Actions taken:
1. Cleaned ink heads.
2. Replaced ink cartrige.
3. Reinstalled software.
Sugestions by HP customer service:
Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
Any suggestions or advice would be very much appreciated.
Thank you for your time!
Thank you.
Sincerely,
Ryan

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it?

On a HP Officejet Pro L7780 All-in-One printer, is there a toner and where is it located? I've looked in Products and Supplies and don't see it but my printer is saying that it's low or empty.

By now, you have probably discovered that the L7780 does not use a toner but cartridges. It actually uses 4 HP 88's. They are black, magenta, yellow and cyan. Usually, black is the first to be replaced. They can be found at Staples, Office Depot and Best Buy.

HP Officejet Pro L7780 All-In-One printer

I am running Windows 8.1
The printer status OFFLINE.
It has done this in the past and I have been able to correct it by deleting and reinstalling it (at least back when I was running Windows XP and 7. Possibly at that time it was the DHCP issue pointed out in a previous post.
Now however, I can remove it and when I add it back, using Control Panel, Devices and Printers, Add a Printer, it is recognized correctly on the network (shows the IP address I know is in the printer) but when I try to send a test page, I get a pop-up saying it is OFFLINE. When I status it, it confirms it is offline.
There is no indication at the printers display that it is offline and it shows it is communicating with the network.

I can’t give you more than the info in my question about the model of the printer-HP Officejet Pro L7780 All-in-One printer
I had been using this printer for several years and this has happened a few times in that it required me to delete it and reinstall—that just does not work now. This last time was after I had upgraded to Windows 8.1 however I did that several weeks ago and it has worked okay since then…this is the first time it has stopped working on 8.1 however
Running Windows 8.1
I tried connecting via wireless and also switched over to wired lan but got same results (Printer Unavailable)
Used DHCP but get the same with static ip address
Cisco Lynksys E4200 wireless router
Just ultimately get Printer Unavailable when I try to print or status the printer
When I try wireless, I see the wireless icon bright blue like I expect it to

HP L7780 Officejet Pro printer Column gridline through pictures.

Similar Messages

Maybe you are looking for