HP Laptop 2000 Asking for Administrator Password

You're the best Paul!  Thank you again!

Hi: Please read the first post at the link below for what to do with the system disabled (halt) code, which should resolve your dilemma. http://h30434.www3.hp.com/t5/Notebook-Operating-Sy​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​...

Similar Messages

  • I'm trying to install the os x but I got the point where its's asking for "administrator password". How do I get that password?

    I'm trying to install the os x but I got the point where its's asking for "administrator password". How do I get that password?

    That password should be the one you used on the system *before* you do the upgrade.
    If you got the computer used from someone else, you need to get in touch with them and get the password.

  • Mavericks asking for administration password. I never had one.

    My Maxbook Air which i bought from Apple.ca last year came with the latest Lion OS.
    Now Im installing Mavericks its asking for an administrator  password which i never had.
    Suggestions.
    Ray Beck

    After downloading Mavericks from AppStore it prepares installation files and it usually requires admin access to do so. I got a prompt asking for admin password as well. But you can just click enter ( return ) without entering any password if you didnt set one. And it should go ahead fine. If that doesn't help report back

  • I cannot install a  Mavericks software program on mac. it asks for administrator password. i never have set up an admin password on computer.

    i cannot install recently downloaded Mavericks software on computer. it asks for admin password. i have never set up an admin password and was able to install programs by passing this step. any help isappreciated,

    Not having a password means that any casual passer-by can have access to all your personal data, or deleting it.
    Resetting or changing a password:
    For Lion or later:  http://support.apple.com/kb/HT6022
    If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
    https://discussions.apple.com/docs/DOC-4101

  • Lenovo Solution Center (LSC.EXE) asking for administrator password

    Hello,
    On my ThinkCentre I have configured an administrator account and two user accounts.
    The machine is running Lenovo Solution Center.
    When working with the user accounts (no admin privileges) the LSC.EXE program keeps coming up and asking for the administrator password.
    Does anyone have a hint on how to stop this?
    Best regards
    MSche
    Solved!
    Go to Solution.

    There's no solution for it - this is by design.  LSC cannot function without admin rights.
    ADMIN Edit -
    Updated versions of LSC should address this.
    Please try version 2.4.003 or later
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/lsc/updates/2.4.003/LSCSetup.exe
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/lsc/updates/2.4.003/LSCSetup64.exe

  • Asking for administrator password

    When my computer starts to boot, it asks for an administrator or power on password. When I do it wrong 3 times, the system disabled number is 78484857...please help I have a paper due tomorrow.

    Hi,
    Please try:
        67582299
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Can't download yosemite asking for administrator password?

    i can't download yosemite. my 2014 iMac is asking for an administrator password. it comes up with my name already in the box but i've typed all my passwords and none of them work. how do i get this password?

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • Asked for administrator password during mavericks install

    Trying to install Mavericks.  During installation, I was asked to provide my administrator password.  I've never had a password on my Mac before.   I've tried my usual suspects, but nothing works.  I'm confident I've never set up an administrator password before.  Anyone know how I can get around this--or at least give me some hints on how I can recover the password that I'm sure has never existed?

    OK. Now I understand. There are certain operations that can not be done from a non-admin account if the admin account password is blank. It's been this way for quite a while, but you probably just never happened to hit on it before this.
    It's a security thing...

  • The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    Delete and redownload those applications.
    (120219)

  • How do I back up my IPad to my laptop.  It is asking for a password I am signed it

    How do I back up my IPad to my laptop.  It is asking for a password but I am signed it

    Close ... before going for a specific Cisco app ... lets find out some details:
    Host we need more details:
    What is your server environment (Windows Server, or Mac OS X Server, or Linux)?
    What security is implemented in your environment - as what is restricted (RDP for all or specifc credentials on all machines? Are you part of local admin group to the server you wish to connect)?
    Does your environment Support CISCO IPSec connection? If so use Settings> VPN and IPSec tab to enter VPN details, if not then go with above suggestion. IF your restricted to RSA then either built in VPN settings or 3rd party app for RSA would suffice.
    Finally, there are many RDP applications out there I use "Mocha RDP Light" (free minimal ads when launched not when connecting).

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for?

    I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?

    Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
    I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
    Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
    When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
    In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
    I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
    Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
    Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
    Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
    Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
    On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
    Good luck!

  • Trying to update to firefox 7.0 when press "run" it ask for administrator's password and will not let me go further. Please advise

    Download Firefox 7.0 (currently running out of date version)
    Click to open file
    Click Run to start running file
    Ask for Admin password
    Will not go further into installing
    Please advise.

    Once I downloaded the update, I was unable to right click "run as administrator" from the exe file. How I was finally able to update to the newest version was to:
    * click the start menu
    * click search
    * type in firefox
    * scroll down to Firefox setup 7.0.1.exe
    * right click and select 'run as administrator'
    The rest was 'easy as pie'. Hope this helps those that had the same trouble I did.

  • When I try to connect to wi-fi, it asks for the password, but I got this question.  If you don't know the password, check with the Wi-Fi network administrator, but I don't know how.

    Hi All, 
    When I try to connect to wi-fi, it asks for a password.  Then I got this question.  If you don't know the password, check with the Wi-Fi network administrator, but how do I find the network administrator.

    Whomever provides the wi-fi.
    To what wi-fi network are trying to connect?

  • TS1398 I cannot join with a nearby Wi-Fi network.  We have wi-fi in our apt. and our IBM laptop is connecting with no problem; but, when I try to use my iPod touch, the wi-fi is locked and asks for a password.  I do not know it.

    How do I join with the network that is in our apt?  The iPod asks for a password and I do not have one.  What to do?

    You have to enter the correct password to connect.
    Ask the person who setup the router for the password.

Maybe you are looking for

  • Follow-up-transactions ( OPP - AG )

    Hi All, I creating the contract with reference to quotation using the copying controls. Header data is copied to contract but item cann,t be copied to contract, while using the copying controls (Quotation to contract) system will ask whether the prod

  • Error while running the application/form.

    Hi, I created a interactive adobe form which will display the FirstName and LastName, i set these values in the implementation of the view(StartView which I have created). But when I try to Deploy New Archieve and Run, it is giving the following erro

  • Anyone gotten a self encoded H.264 video to work yet?

    I'd like to know if anyone out there has been able to successfully play a video encoded with H.264 that you encoded yourself (not from the music store) I've only been able to get MPEG4 videos to work, even when I set the encoding options identical to

  • Calling IP planning sequence several times

    Hi Experts, we are trying to start a IP planning sequence n-times throughout an ABAP report which is located in a  process chain.  In the planning sequence a function from type distribution is located which should distribute line of business nodes to

  • Unable connect oracle database problem

    Hi , I ahve installed oracle 11g on windows 7 machine.It is working fine intially after some days when ai m connecting it is giving the below error. ora-01033 oracle initialization or shutdown in progress. After this I ahve done the below steps and c