Hp laptop apu upgrade... Bios?

Please read original post first:
http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/Hp-g6-1b60us-apu-upgrade/m-p/2730279
Would it be fine if I installed the apu with f.49 bios? The latest bios for the 1d60us is f.48.

JohnB95,
I apologize for not following up on the other thread... sometimes I lose track of "older threads", while moving forward with the "new".
As you have the g6-1d60us computer and the F.49 BIOS revision is coming directly from its support page, you should have no troubles at all. It looks like the only fix/enhancement the new BIOS provides is "Optimized memory settings to improve system reliability". This will in no way affect your choice of CPU upgrade.
Please send KUDOS
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Similar Messages

Can we use two separate apple ids on one laptop to upgrade apps

can we use two separate apple ids on one laptop to upgrade apps

Welcome to the Apple Community.
Only if you use two separate user accounts.

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Windows 8 - Can I upgrade BIOS without loosing embedded product-key?

On machines with Windows 8 pre-installed, the product-key is embedded in bios.
So... what happens with the product-key if I upgrade Bios?
Can I be sure I don't loose the product-key?

The product key should remain intact. If it doesn't, it is a bug and Lenovo would need to correct it while the machine is under warranty.
Updating a BIOS for a machine not under warranty isn't advised.

Lost user data after upgrade bios in G580

HI
I have strange problem with Lenovo G580 with Windows 7. After upgrade bios to newest version and reboot my system start without any user data (no documents, no programs installed earlier), All reboot take short time, about 1-2 minutes. Only username stay the same.
Is it possible that upgrade BIOS was bring recover system to factory?
Does data can I recover somehow?
I need help because there was important databases of company.
Thanks
Dariusz

hi Dariusz,
Welcome to the Lenovo Forums.
That's really strange indeed and very unusual as I've never seen a BIOS update delete a user's data before. Perhaps you're logged-in to a temporary user profile?
To check if you're logged-in to a temp profile, show hidden files and navigate to C:\Users and check if you have an identical username with a dollar sign right next to it and apply this fix:
Fix Corrupt Windows 7 Temporary Profile
For data recovery, check these Free File Recovery Software Programs.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

Failed to upgrade bios HP ENVY 15t-3200

Failed to upgrade bios HP ENVY 15t-3200
The computer of me is a HP Envy 15t-3200 CTO.
Bios initial a F.07, after upgrading to F.08 or F.0A will happen state as follows:
1. Keys pressed On (disabled) wifi not use the been
2. System message missing 2 process manager hardware
- USB-IF xHCI USB Host Controller
- Unknow
I am would like to return state Bios initial F.07 but on web HP no longer bios F.07 again?

virut900 wrote:
Failed to upgrade bios HP ENVY 15t-3200
The computer of me is a HP Envy 15t-3200 CTO.
Bios initial a F.07, after upgrading to F.08 or F.0A will happen state as follows:
1. Keys pressed On (disabled) wifi not use the been
2. System message missing 2 process manager hardware
- USB-IF xHCI USB Host Controller
- Unknow
I am would like to return state Bios initial F.07 but on web HP no longer bios F.07 again?
What is the installed operating system? Is it Windows 7 or Windows 8?
If it is Windows 8 then you need to install the wireless button driver to return that function to your notebook.
You probably need to reinstall the Realtek Card reader driver and the Intel USB 3.0 host controller driver software driver to clear the missing device driver issues.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Is it possible to upgrade BIOS without Windows installed - Satellie L30

I don't have WIndows installed on my Toshiba Satellite PSL33E. Does it possible to create boot CD to upgrade BIOS on my notebook ?

This is only possible if you would have an Toshiba traditional BIOS update version.
But the point is that Toshiba European driver page DOESNT provide such BIOS.
Theres only a windows based BIOS which means that you can update it only from running Windows OS.
Sorry, dont think that you could do this. Oohhh wait maybe the ASP in your country could help you. Maybe the authorized service provider can update it using a floppy disk.
Greets

How to change/upgrade BIOS Version String 55KT08AUS

Sir,I am having Idea Centre k200 53123BQ Dated 20/03/2008 Manufactored in INDIA. ORIGINALY Windows Vista was the OS. Now I upgraded it to Window 7 Home Premium. Ram also upgraded from 1GB to 2GB. Generaly working well. But I am getting two problem I.Getting Error message that "Windows Desktop stopped working and upgrade BIOS Version. 2. If I put the system in SLEEP mode the system get unstable and it shuts down and restarts. otherwise the system is working well. Well can I upgrade the old BIOS Version String 55KT08AUS? If so what are the compatible version? Where Can I Get the BIOS? Will Lenovo,s local Authorised Service centre can help me on payment? BIOS Vendor was Lenovo. Release Date 18/12/2007.Rom Size 512.00kb. I will beThankul if the community can throw some light on it/ M Selvaraju

ancesar wrote:
Of course my update was successful. I am able to see the 6.6 updates in other stuffs, as for example in /etc/redhat-release. Just the progress bar when Oracle Linux is bringing up is showing "Oracle Linux Server 6.4". My guess it is some kind of image, because it changes the color as the progress bar is going forward.
Actually, your update wasn't successful, or at least, it wasn't complete. The tool responsible for the boot loader screen is plymouth and the version comes from the /etc/system-release file. If the content of that file isn't "Oracle Linux Server release 6.6", then your update hasn't updated oraclelinux-release to the latest version.
However, if that file is correct, it means that plymouth hasn't updated the initrd properly during the upgrade. You can manually trigger a rebuild of the initrd by running:
# plymouth-set-default-theme text --rebuild-initrd
And it'll rebuild it for you. However, I've never seen a complete update (via yum update) that hasn't rebuilt this properly. Did you perhaps only do a security-related update using the yum-security plugin?

Need to know which is better and faster for laptop memory upgrade

What is the difference and which is better for a laptop memory upgrade: SDRAM, DDR SDRAM, SIMM? One site suggested DDR SDRAM and BB suggested SO DIMM

SODIMM is the physical form factor of the module, DDR SDRAM is the actual memory type.
SIMMs are an ANCIENT form of memory module. If you have a system that uses SIMMS, you will spend less money throwing your computer in the trash and buying a new one.
Non-DDR SDRAM is also ancient.
Each system can only use one type of memory, i.e. you can't use DDR memory in a system that only used non-DDR memory, and you can't use DDR2 memory in a DDR system.
To find out if the configuration is 2x256 or 1x512, you'll need to look at what is installed.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Upgrade BIOS while in WinPE

I am looking for a way to automatcailly upgrade BIOS while doing a build (we do not use SCCM) Anyone got any pointers on this ?

This sounds like a Microsoft question.

HP G6 APU upgrades?

Hello I have a HP g601b60us and I'm in the market for a new apu. I've been looking aroung the forum and found this question by user JohnB95 (http://h30434.www3.hp.com/t5/Notebook-Hardware/Hp-g6-1b60us-apu-upgrade/td-p/2730279) and going by a list of possibly compatible processor provided by user Huffer, I was wondering if it would be possible to upgrade to an AMD A10-4600M apu? Any help is greatly appreciated. Thanks.

Hi Halumina18,
Did you see the post lasvegasman?
Let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Upgrade\bios check

@ one time I thought MSI had a somewhat of a recall on K8N NEO 4 PLATINUM SLI BOARDS, Or an upgrade,bios check of some sort . can someone verify this for me and steer me in the rite direction to see if I qualify for this whatever it is . Thanx bobber128

If you are referring to the MSI USA upgrade offer, I dont know if its still available but here is what I did and posted:
https://forum-en.msi.com/index.php?topic=84945.0

[Lenovo Ideapad S410p] Help me ! Please ! BIOS of my laptop was corrupted BIOS firmware

My laptop use Phoenix 89CN25WW and now I want to have a BIOS file of Lenovo Ideapad S410p (touch) or Lenovo Ideapad S510p (touch) to repair the error because BIOS of my laptop was corrupted BIOS firmware   Please help me !   Thank you so much for your support !  Click here for image   Mod's Edit: Image(s) converted to link(s) due to size. Photos are limited to 100k size per forum guidelines.
                     Please refer to About Posting Pictures for more information.

Thank you so much for reply !
Can you tell me hold down Fn+R keys or Fn+B keys or Windows+B keys to recovery bios for Lenovo Ideapad S410p from USB flash with CRISIS Recovery Disk Tool (BIOS.WPH, MINIDOS.SYS, PHLASH16.EXE) ?   Thank you so much for helping me ! Good for you !

[K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

Hello everyone!
I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
Can you tell me what's wrong?
Thanks, bartull@
PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

I think that the problem may have been caused by flashing either with liveupdate or with winflash. I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash. My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
If that works, then reflash to the bios you tried before with the same procedure. Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
Good luck.

Hp laptop apu upgrade... Bios?

Similar Messages

Maybe you are looking for