HP laptop D1E80UA is doing nothing but showing HP and running help me plz

It's my sisters laptop all I can get it to do is HP and the little wheel is running and it won't do anything else

@Coffeecup1007 ,
Hello and thank you for posting on the HP support forums.  So that we can best help you please check out the following link.
Advice for asking the "Very Best Question"
As well when you post back please include your full model and product number.
HP Notebook PCs - How Do I Find My Model Number or Product Number?
I hope to hear back from you soon
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Similar Messages

  • My 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down.

    my 5th ten iPod is basically doing nothing but trying over and over again to start up. I've tried to restore it, but when the logo apple appears, it simply shut down. Then I've connected it to my macbook pro, and I've seen the script "Please Wait - Very Low Battery", but, after some time, the iPod tries to start up again, and nothing happens. It's a kind of noise, I'm thinking about the hard disk, (it's a 80Gb version), and I'm listening to it; every 30 seconds seems to try to open and then shut down again. I can't see the iPod in iTunes too. Don't know what to do. Can someone help me? Thanks a lot, it's my first forum

    It sounds like the battery could be going bad as well as the iPod's Hard drive.  You'll want to have the iPod serviced either by Apple or a third party repair company. Here is Apple's pricing:
    http://www.apple.com/support/ipod/service/prices/
    Google for "iPod repair" and you should get a ton of results to work with.
    B-rock

  • HT201263 iphone4 stopped working, restore does nothing but show error 14

    One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

    One day my phone just crapped out on me. I tried charging it but nothing works, so I decided to totally factory restore it. only that didnt work and now the phone is stuck on the spple screen. The restore gets to the end and then pops uo error 14 and cancelles the restpre. The phone does absolutely nothing and i am desparite. Please help!

  • Problem with IPad , did an update as requested now it does nothing, but display a graphic that shows I should connect to ITunes . So I connect it to my IMac run ITunes nothing happens. Try restore pop up says not eligible for restore.

    Wow what a pile of crap you must wade through to ask a question .
    Ok so the problem is I did an update on my IPad and now it does nothing but show a graphic showing the power cable connecting to ITunes
    So  I connect iPad to my IMac and prompt iTunes nothing happens. So I try sinc nothing happens.
    So I try restore and the popup says I am not eligible for restore.
    What is going on with this stupid machine

    Machines are incapable of being stupid. Not so of their operators.
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • Maybe its just me but verizon had my rebate for a month and some change and  still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im

    maybe its just me but verizon had my rebate for a month and some change and  still haven gotten it i got this contract on july 10, and my samsunsung galaxy s4 does nothing but shut off on me constatntly and they wont even help..any suggestions because im looking into a lawsuit now so aggravating..my phone is def on a blank sceen right now

    JCLouis, 
    We saw your story and are very worried about what we read! This isn't like us at all and we are here to help sort it all out. We recommend calling the Rebate Center to check on the status. Their number is 1-800-457-0864.
    We can help you right here with your phone! How often does it turn off? Is it just that the screen goes black or does it completely power down? Also, does it start back up by itself if it does power down?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • Since uploading Maverick, my Microsoft apps give an error message "(the app) quit unexpectedly.  Click Reopen to open the application again."  However, this does nothing but renew this window.  What to do?

    Since uploading Maverick, all of my Microsoft apps give an error message "(name of the app) quit unexpectedly.  Click Reopen to open the application again."  However, this does nothing but renew this window.  I have to click on the "OK" button to get rid of the error message.  What to do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • I just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

    i just received my i phone 4,inserted Amayim with 4G plan,but showing noservice and bar with emergency calls only screen.Also when i down loaded i tunes to my laptop (windows7) there is an error(9808) message saying i tunes store not supported completely.

    first of all the iphone 4 is not a 4G phone
    second it sounds like your iphone could be locked to another operator then the sim you have inserted

  • I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    I installed firefox but when trying to download web items I get a message that internet explorer has stopped working and does nothing but close program.

    See:
    * https://support.mozilla.com/en-US/kb/Firefox%20crashes%20when%20you%20open%20it

  • I software update and it asks me to restart. i do it and it does nothing but restart the computer

    I software update and it asks me to restart. i do it and it does nothing but restart. no notifications or updates or anything. i have done this several times. please someone help me. T⌢T

    i've done that, it asks to install the updates, and then says it needs to restart the computer, the computer restarts and non of my updates are installed. i re open software updates, and it asks me to install all over again. this is really frustrating.

  • One of my audio books will not play.  My music plays.  And my other audio book plays.  When I try a listen "the singularity is near", It does nothing.  I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning.

    One of my audio books will not play.  My music plays.  And my other audio book plays.  When I try a listen "the singularity is near", It does nothing.  I try and move he cursor to the middle of the track and hit play, but it moves back to the beginning, and still does play.  How do you report a problem with a mandatory apple app?

    Audiobooks purchased from Audible.com.  They play on iTunes on my computer.  They have been playing on my iPod Classic until two days ago.  I'm in the middle of two books and now one does not keep track of where I am and the other does not play.  I also have other books not playing on the iPod that use to play.  They all play on iTunes on my computer.

  • Windows Virtual PC (VMWindow.exe) does nothing but open a dialog box labeled user "Virtual Machines"

    Windows Virtual PC (VMWindow.exe)  does nothing but open a dialog box labeled <user> "Virtual Machines"
    Running Win 7 Pro 64 bit SP1 on an Asus Z97 Pro socket 1150 mobo, with Intel VT-d both Supported and Enabled in the BIOS.

    I am attempting to use Win Virtual PC as one would use VirtualBox or VMware Player.
    I thought I stated my case clearly.
    Are you proposing that Win Virtual PC functions ONLY  to run Win XP in a virtual machine environment? 
    Bill
    No, I just suspect you would like to install XP mode on virtual machine.
    Supported guest operating systems in Virtual PC:
    •Windows XP Service Pack 3 (SP3) Professional
    •Windows Vista Enterprise Service Pack 1 (SP1) and later versions
    •Windows Vista Ultimate Service Pack 1 (SP1) and later versions
    •Windows Vista Business Service Pack 1 (SP1) and later versions *
    • Windows 7 Professional *
    •Windows 7 Enterprise.
    •Windows 7 Ultimate
    • Windows 7 Professional (SP1)*
    •Windows 7 Enterprise (SP1)
    •Windows 7 Ultimate (SP1)
    *Note  Virtual applications are not supported on Windows Vista Business or on Windows 7 Professional or on Windows 7 Professional(SP1). All other features of Windows Virtual PC are supported on these two guest systems.
    In addition, refer to this guide to create virtual PC before using:
    How to Create a New Virtual Machine in Virtual PC
    http://support.microsoft.com/kb/826291
    Kate Li
    TechNet Community Support

  • 3000 K100 does nothing but beep

    Model #: 57068347
    OS: Windows Vista
    I went to bed and the computer was working. I wake up the following morning, the screen is blank, and the machine is doing nothing but beeping. I tried cycling the power and still nothing. No POST screen, no response from the keyboard, nothing. Just repeated beeps from the speaker and that's it.
    I cruised through the support forums a bit and didn't find much that was useful. Anyone got any ideas?
    thanks!

    epicdave,
    What can you tell us about the beeping?  Generally with PCs, there will be a series of long and short beeps in some kind of repeating pattern which can indicate what component is causing the trouble.
    Can you discern the number of beeps before the pattern repeats?
    Failing that, or more generically I would suspect memory, system board, power supply.   I'm going to suggest that if you are still in warranty that you contact service.   If you are outside of warranty, I'll offer the following things I might try...
    1) Memory - remove and reseat the memory.  While you have each module out, check the condition of the little gold contacts.  If they look dull or have dull spots where the contact is made (you will see the slight rub marks where the socket engages each tiny contact pad on the module)  you can gently use a pencil eraser to clean the contacts on the memory - just rub the eraser back and forth a couple times gently and then wipe away any of the eraser material.  Re-insert in the sockets and try to power on the PC again.   
    2) System board - could be any number of componenet failures which would require a board replacement.  Depending on the BIOS, the beep codes can sometimes identify which component to confirm the diagnosis.  Try removing any expansion cards and power up again.  
    3) Power supply - less likely as it sounds like it is working to some level since the system is beeping. 
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • My macbook Pro Retina is 5 months old. I have nothing but a cursor and a black screen. What gives???

    I have nothing but a cursor and a black screen. It's only 5 months old! What gives here? This is my first Mac and I'll tell you, they aren't impressing me.

    Did you get it fixed at the store? I have this same problem my macbook pro that I bought at the end of December. I am not impressed and very unhappy that I now need to drive to some store to fix it. I tried to get it fixed through the phone but alas it still does not work.
    After spending as much money as I did for this thing that I've only had for less than three months and used maybe less than 10 times, I'm slightly upset. I need to have this working by Saturday.

  • New apple user, just got new iPod touch gen 5 and there is no App Store on it. Restored it twice and this does nothing. What do I do, help please :(

    New apple user, just got new iPod touch gen 5 and there is no App Store on it. Restored it twice and this does nothing. What do I do, help please :(

    Has it been disabled via Settings -> General -> Restrictions?
    I assume you have checked other pages of apps by swiping to the left from the home screen?
    B-rock

Maybe you are looking for

  • How can I see Foreign Currency FC balance in Purchase Analysis Report??

    Dear Experts, Right now in the Purchase Analysis Report, I can only see Local Currency and System Currency balances. How can I see Foreign Currency balances?? Much Thanks! Warmest Regards, Chinho

  • Boosting signal of Airport extreme

    I am an absolute dunce when it comes to wireless and need some advice! I have an airport extreme in my office that works with my desktop and also provides adequate signal strength for the remainder of that floor and the one below (usually). But now m

  • Smartforms in SAP4.6B

    Hello There, Is there any possibility to use SAP Smartforms in SAP version 4.6B? If so could any one let me know the procedure to install in 46B Unix Enviornment? Thanks in Advance. Cheers Sankar

  • XI to IDoc

    I'm just looking for any reasons you guys can think of why this is happening: I pull the Flatefile in from a server, do content conversion, map it, and then send it out as an IDoc to an SAP system.  The thing is, it says it's completed with no errors

  • Batch with restricted status not allowed to consumed in Process order/Staged/Deliver

    Hi My requirement is batch with restricted status can NOT be - consumed in process order via MIGO or MB1A - Can not be delivered to Customer - Can not be allowed / available to be staged Together with your input i want to make development strong/defe