Hp Laptop do not boot!

Hello friends! Today I tried to turn on my Laptop Hp, it run but the display was black, i waited for some moments ( not to much) but it was still black, the power light and the cooler were on.i tried to make a fore shut down by pressing the power button for a while but it doesn't, than I remove the battery, and it goes off after i removed the dc power. I plugged the power and battery again, but now it can not start, even the power light is not turning on when i plugged it in, and when I press the power button still nothing happens...please guys help me, as now I am in a foreign country and I do not know how to fix it.

What model of laptop is this and which version of Windows was it running before it apparently quit working? 

Similar Messages

  • TS1367 my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

    my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?

    Do you have a compatible OSX installed on this 'storage' HDD?  If not, it will not boot your MBP.
    Ciao.

  • Laptop will not boot, no display and flashing caps key

    Hi,
    I am attemping to repair a laptop for a family member, their baby threw up on the keyboard, although after they cleared it up they said it was still working (booting into windows, mouse working etc). They took the old keyboard out themselves but it looks like they were a bit heavy handed with it; there are quite a few scratches on the metal plate underneath the keyboard and the plastic surround. I have not yet been able to confirm if the laptop was still booting after the keboard was removed.
    Anyway - I went to their house to do what I thought was going to be a relatively easy job, simply connecting the new keyboard. Now the laptop will not boot, there is no display on the screen and we get a flashing CAPS/F12 key. I have looked at the table for LED codes, but I am not sure if it is one flash lots of times, or six flashes. The warranty has also run out so sending to HP not really an option.
    There are six short flashes, with quite a long pause between each one. After this the laptop powers off and after another pause turns itself back on and starts over. If it is one flash (CPU) then I guess they must have shafted something on the board by shoving the screwdriver in underneath the keyboard to prise it away from the laptop. There is however not an awful lot of stuff exposed - there is a fairly substancial metal plate under where the keyboard would sit to protect the laptop.
    I am hoping at the moment that it is showing six flashes - which is BIOS authentication error. I am not that familiar with HP products, but could this be caused by installing a non-genuine keyboard? The keyboard looks the same from the top, but was bought for less than a tenner on ebay.
    If anybody has any ideas that would be great.
    Aaron

    Hi there,
    I have a link of HP support that you may have a look and try to find out what exact the problem of you PC, good luck.
     And let me know what have you find out.
    It is:
      http://h10025.www1.hp.com/ewfrf/wc/document?cc=au&dlc=en&docname=c01443371&lc=en&product=4115148&  tmp_track_link=ot_search
    Tomme

  • Laptop does not boot.

    Laptop will not load Vista OS.  BIOS works ok and all internal diags passed ( harddrive and memory ).  The screen stays black with the cursor blinking.  I tried booting off on the dvd drive with a Vista and Windows 2008 server boot disk but got a CDBOOT Error Code:0.  Could not find that error anywhere on the web.  I removed the harddrives and screen showed "NO bootable disk" as I would have expected.  SATA Harddrive issue?  Could that also cause the DVD drive to malfunction?
    thanks,
    John

    Hi @jgm1957 
    Welcome to the HP Forums!
    It is a  superb  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your notebook will not boot or startup but just presents a blank or black screen.    You were able to access the bios and test the hard drive and memory and both passed. You tried booting to a Vista disk but were unsuccessful.
    Here is a link to Computer Does not Start (Windows 7, Vista, XP)
    Here are two more links that may also help.
    HP Notebook PCs - Recover Windows Vista Operating System Using HP Recovery
    HP Notebook PCs - Configuring the Boot Order in the System BIOS
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • G580 Laptop will not boot due to the harddrive some how disconnecting

    Hello,
    My problem with my G580 is that when I start up there is a sounds coming from the laptop and in the booting device list, the HDD with windows 7 on it which is the main HDD won't show. Pretty sure it is because the HDD somehow disconnected but how much will it cost if I send it in to lenovo to fix it?
    Video of when I start it up... https://drive.google.com/file/d/0Bzb6bwEsdb02cS1RV05aTkVSbUU/edit?usp=sharing

    Hi Brandon,
    Welcome to Lenovo Community!
    I’m sorry to hear that your G580 Laptop is not detecting the HDD (Hard Disk Drive) and not booting to Windows. I would suggest you to perform the BIOS reset once and check if the HDD is detected in BIOS, below are the steps for the same:
    To access BIOS menu press F2 when the Lenovo logo appears on the screen while the computer is starting up.
    Then to reset the BIOS to its defaults click on “F9” Key and select YES.
    Now click on “F10” Key to save the changes that are done in BIOS, the computer should automatically restart. Please check if the issue persists.
    If the issue persists even after performing BIOS reset, I would suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed and for information about repair cost.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Hp pavilion laptop will not boot up.

     I get this error The file header checksum does not match the computed checksum. I'm not able to do anything with it after this screen, it will not boot to safe. What can I do?
    I've removed the battery, which is dead anyway; laptop is plugged in.  Have tried different power source and that doesn't help.
    There  is no blinking cursor, etc. I have tried F2 & ran that memory & hard disk diagnosis & nothing seems to be amiss. On the error log I really didn't see any errors.
    I don't have recovery disc either but laptop won't boot to cd rom drive so even if I had recovery disc am not sure that would work.
    Help please I'm at a loss now of what to do.  Thanks.

    Does F11 at power on work to boot into Recovery?
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01867418&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Toshiba Satellite Laptop - Will Not Boot, Safe Mode Not Accessible

    Hi everyone, thanks in advance for your help.
    I am trying to help my mother-in-law (I know, who does that!?) with her laptop. Because of the boot problems, I can only offer you limited info on the specs, but here is what I do know.
    Toshiba Satellite
    Model Number PSAE6C-TJ908C
    2 Gig RAM (assuming DDR2)
    HDD is a Toshiba MK2035GSS 200Gig
    OS Windows Vista
    Bios Version 2.60
    Problem:
    First it would boot ok in one user account, but when booted in secondary account it would act odd, ie caps lock stayed on when not pressed, etc. Deleted secondary account, ran Windows repair function, now I cannot access the primary account, will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc. I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work. (New keyboard which was replaced in December, warranty has since run out, thank you Staples.)
    Any and all help greatly appreciated. I'll answer any other questions you have as they come up, I realize I may have left out some key details.
    I forgot to add a couple of details. When booting, it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps (3 I believe), the Filter Keys box comes up, and when you try to enter the login password it will not recognize it.

    Satellite A200-TJ (9PSAE6C-TJ908C)
    will not boot in safe mode, can not change boot sequence in setup to boot from cd or run restore disc.
    I have to use an external keyboard as the laptop keyboards enter key and "a" keys do not work.
     it hangs at the Toshiba screen prompting for either F2 for setup or F12 for boot device selection, when you reach the log in screen it gives a number of odd sounding beeps
    That's one sick laptop. If the thing beeps on startup and even the keyboard doesn't work, I'd figure on replacing it.
    Are there important files you need to rescue?
    -Jerry

  • My Laptop B490 not booting after bios update

    My laptop not booting after updating bios i used windows 8 OS.
    I downloaded Bios from following link.
    Bios Download Link
    After updating bios, system restarted automaticaly, after that only power led is glowing, screen stays blank.
    Help me solve it.
    Solved!
    Go to Solution.

    hi sathish291
    Welcome to the Forums.
    Can you try the following:
    1. Power down the machine, remove the AC adapter and battery.
    2. Hold the power button for 30secs and reconnect the AC adapter only then turn the computer ON.
    If the machine still doesn't power up normally and boot into WIndows then it's likely that something went wrong (could be a bad BIOS flash or an internal component might have gone defective during or after the BIOS update). In this case, you may need to contact lenovo on how to go about getting the unit serviced.
    Support phone list
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Noisy harddisk or fan, laptop does not boot

    I have a 2 1/2 years old 12inch PowerBook G4 which does not boot anylonger.
    It has a longer history: 1 1/2 years ago the fan or hardisk started making lots of (ugly!) noise and I could hardly work anylonger: the machine was very slow. I noticed that the available space on the hard disk went below 4GB which is apparently a soft limit (needed for swap space?). But the machine was also quite warm.
    I actually got it running again by cooling the laptop with some lead blocks which had been in the freezer for a while. (I still don't know why it worked!)
    1 1/2 years of smooth running made me believe the machine was fine. Just before X-mas the same happened again. First only some noise with little impact on the performance (I could still make a backup of my user accout) but then the noise became worse and the computer speed went to zero. The noise also changes when rotating the laptop (up-side-down etc.) Sometimes it becomes very bad and then it makes "click" and everything stops (but also the HD). Then one hears how the HD/fan start up again and shortly after the noise comes back.
    For a while I was able to boot almost fully but then it hang, now it hangs already a few seconds after switching on.
    I suspected some bad bearings but could not explain the previous recovery.
    Any idea?
    Thanks alot in advance!
    p.s.: I don't have frozwn lead bricks anylonger to repeat the same treatment as the year before
    p.s.s.: last time I did a hardware check and it told me the HD was not o.k. -- but when everything run again the test reported a working HD!
    Powerbook   Mac OS X (10.3.9)  

    Welcome to Apple discussions!
    Judging by your comments, the noises you report and Disk Utility saying your hard drive was bad, I would suspect it is almost fried. Now is the time to backup your stuff!
    Even though Disk Utility now says your drive is O.K., the fact that it has already reported a drive failing is cause for concern. I would head for Apple Repair after backing up.
    You have posted in the G4 tower forum. In the future please post in the appropriate Powerbook Forum.
    Cheers!
    DALE

  • Envy DV7 laptop will not boot without the power cord being connected

    My laptop won't boot on its own even when the battery indicator reads "fully charged (97%). If I have the power cord plugged into the computer (and the wall), it boots right away. Without the power cord, the "power indicator light" flashes once, the screen brightens to a lighter shade of gray, then it just shuts down.
    I'm thinking I need to replace the battery but I thought it best to check with the experts first...................☺
    Thanks!!
    ETA..........I just saw the post about power cord failure. My power cord is one of those affected and I will be filling out the request for a replacement. Unfortunately my serial number is apparently located inside the battery compartment. I'm wondering if my cord has overheated and caused this boot problem with my computer.

    Hello, @jksweeney 
    Welcome to the HP Forums.
    I see that your having an issue with the power and your notebook. That you've applied to have the power cord replaced as it was part of the recall.
    Please let me know when that has been taken care of if the issue remains. I will remain subscribe to this thread, so that I will be notified if you post again.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Laptop will not boot up without the windows xp disc...which i don't have

    i've got a toshiba satellite m115-s1064. when i turn the laptop on it boots up and says 'insert cd labeled windows xp professional cd-rom' i don't have this disc and no disc came with the laptop...what are my options here. i've thought about wiping the memory, but don't know how to do it, as this screen pops up immediately unless i press f2 or f12. this noob needs help and fast!

    Satellite M115-S1064 
    Start here. Let us know what you learn.
       Advanced troubleshooting for general startup problems in Windows XP
    -Jerry

  • When i install a 2nd 1gb stick of memory in my pavilion dv6000t laptop, the laptop will not boot.

    HP Pavilion dv6000t running Windows Vista Ultimate 32-bit version.  My system currently is running on a single 1GB stick of memory.  I have a 2nd matching 1GB stick of memory.  When I install the 2nd stick of memory the system will not boot.  All the lights come on, the hard drive spins up, but you can not even get into the BIOS setup screen, it just sits there with a blank screen.  What could be causing this.  Thanks in advance for any assistance you may be able to provide.

    Hi:
    When I encounter issues like that, I switch the memory modules to see if one of the chips is bad.
    So, I recommend you remove the one memory chip that is working, and put the other one in its place.
    If the PC boots up, now install the second chip and see what happens.
    If it doesn't boot up, then there is some undefined hardware issue.
    If the PC doesn't boot up when you initially switch the memory with the one stick, then you know that the one memory module is bad.
    Paul

  • Laptop will not boot past the grey screen bootup screen

    Hi,
    I have started up my machine today and its displaying the grey screen and is not booting any futher.
    The machine is only 2 Months old, its a :
    2.8GHz Intel Core i7
    8GB 1066MHz DDR3 SDRAM - 2X4GB
    512GB SATA HDD
    SuperDrive 8x (DVD±R DL/DVD±RW/CD-RW)
    MacBook Pro 17-inch Hi-Resolution Antiglare Widescreen Display
    Any ideas?, It was fine yesterday now nothing
    Thanks.
    Ron

    Try this article.
    Mac Os X: Gray Screen appears during startup
    http://support.apple.com/kb/TS2570

  • Mountain Lion Update Doesn't Finish - Laptop will not boot

    Hi,
    Last night I saw that there was a Mountain Lion update available for my MacBook Pro.  I've always updated my software as the updates became available.  I had several other apps to update, so I chose "Update All". 
    I got a message at the end that the installation required a reboot, however, the MacBook Pro could not restart as it said that FireFox was canceling the restart.  I looked and the FireFox add-in XMarks was stuck in some type of failed sync mode, and couldn't be stopped.  I was also unable to force FireFox to quit.
    After an hour of this, I finally just had to press the off button and power down.  I assumed that the software update would still continue when I restarted my computer, but all that I have is just a grey screen with the Apple logo and a circular progress indicator that has been going in a circle for about 7 hours.
    I guess my first question would be, "How do I actually boot into my MacBook Pro and get past this grey screen".
    Is my laptop hosed?  If so, how would I go about reinstalling Mountain Lion?  I bought my MacBook Pro on June 21, 2012, so everything should be compatible.  I have previously updated to Mountain Lion without any problems.
    I'd like to find some way to be able to boot up my MacBook and skip this grey screen.  But, if I'm just in disaster recovery mode, how would I obtain a Mountain Lion install DVD?  I've already paid for the update.
    Thanks,
    William

    I found out how to get to the disk utilities.  I also did a verbose log of the boot-up process, and it hung right after it said that the handshake with my internet connection was complete.
    So, for others, Command-R at the boot tone got me to the Disk Utilities, and Command-V at the boot tone gave me verbose logging of the bootup process.
    I repaired my disk and permissions, and nothing changed, so I decided to reinstall Mountain Lion.
    Thanks,
    William

  • Toshiba laptop will not boot up

    Hello.
    A couple days ago my younger brother (in a fit of rage on a video game he was playing on the laptop) slammed the laptop shut and tossed it on his bed. I took the laptop and tried turning it on and got nothing. I have reached a screen where it asked to either "Start windows normally" or with Windows repair and choosing to Start windows normally will only give me a black screen for a few seconds and then start over again asking me which option to choose. I have tried choosing the other option and all I got was a black screen with my cursor and nothing more. I have tried many solutions online and so far none of them have worked. A friend of mine told me to "revert the system settings" but I couldn't figure out how to do that. The laptop screen was already cracked from previous encounters with my younger brother and we use an external moniter. I tried resetting my laptop to factory settings by reading somewhere to hold 0 (zero) when I turn the laptop on until it beeps but I got this message:
    Intel UNDI, PXE-2.0 (build 083)
    Copyright (C) Intel Corporation
    For Atheros PCIE Ethernet Controller v2.0.2.7(11/02/10)
    Check cable connection!
    PXE-MOF: Exiting Intel PXE ROM.
    No bootable device -- insert boot disk and press any key.
    I have no idea what any of that means but I do not have a disk for my laptop. Any help would be greatly appreciated guys!!

    It sounds like it doesn't see the hard drive. It's possible that the drive was disconnected. Many models have a small door on the bottom that you can remove to access the hard drive. You may want to check that it's connected securely. If you don't know what you're looking for, try doing a Google Image search of a laptop hard drive.
    - Peter

  • Laptop will not boot up.

    Installed recovery disk. Logo screen comes up momentarily. Tried F2 and F12, takes me to screen that says "the last attempt to resume the system from its previous location failed. Attempt to resume again? use arrow keys to highlight your choice. Continue with system or delete restoration data and proceed with system boot." I tried to select either option but it did not do anything.

    Please include your full model number when posting problems on the forums. It can be found on the bottom of your laptop.
    You're using the recovery discs and not the recovery partition, correct?
    Try booting from the disc again and restart the recovery process.
    You also might try holding '0' when booting to start from the recovery partition. See if you can recover that way.
    If neither works, it might need servicing. You can contact support at (800) 457-7777.
    - Peter

Maybe you are looking for