HP Laptop Fan Isn't Working

I have an HP Laptop, model G62-367Dx.  A couple days ago, my laptop would turn on, work for 15-minutes, then freeze and shut down.  Looking around on the internet, I found forums suggesting my vent and fan may need dusting.  So, I bought compressed air and dusted out my vents.
After cleaning my laptop, I tried turning it on, only to find the same results.  When I restarted it, I saw the following message on the screen:
"The system has detected that a cooling fan is not operating correctly.
Continued operation is not recommended and may cause unpredictable behavior that could result in random shutdown, data loss or possible system damage. The system will shut down in 15 seconds. To prevent shutdown and continue operation, press the Enter key now.
System Fan (90b)"
While my computer was running, I examine the fan to see that it was not turning at all.  Is there anyway I can get the fan turning again?  Or do I have to replace my fan or computer?

I am also facing the same issue and the same error as you explained.Can any one help...

Similar Messages

  • CPU fan isn't working on Hermes 845GV full and Lite

    well
    i have here an hermes 845GV and when i switch it on, the cpu fan starts for about half an second and stops then, same problem with the lite version.
    so, can this problem be solved or do i have to send it back to msi? (both comps are new)
    thx schBORG

    it works fine, except the cpu fan isn't working, it only starts for about half a sec when u switch it on, when u connect the cable with the plug for the 2 side fans it works fine, but when the cpu fan isn't working, the cpu gets too hot and the computer crashes, and so the os installation is destroyed, that's the reason why i found that problem

  • Laptop Fan Replaced But Fan isn't working

    Hello Hp forum members, a few months ago my laptop's fan suddenly stopped working (the cause was probably lack of cleaning so the fans were clogged and ended up destroying its own motor) and I received the error messages on startup. So I got my fan replaced but now the error messages are gone but my fans aren't even on so I still have an overheating problem.
    My laptop's model is Hp Pavilion DV6-6136TX
    15" display
    2nd Generation Intel Core i7-2630QM 2.0GHz CPU
    4GB RAM
    640GB HDD
    ATI Radeon HD 6770M with 2GB Dedicated Graphics
    Windows 7 Home Premium 64 Bit
    I've had this laptop for 2 years and It is like family to me. Please help me find a solution to this I've been trying to fix it for 2 months and I'm really desperate.
    In advance, Thank you hp support forum
    This question was solved.
    View Solution.

    @Phileh
    The fan part number is 650797-001 can be found on page 30
    This one gets here, for example,
    Component replacement procedures is on page 90
    Say thanks by clicking the "Kudos! Star" which is on the left.
    Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.

  • HELP! My laptop envy isn't working

    Help Me!
    My laptop envy turns on, per se, in the sense that the keys, loading light, on light, and etc light up--However, the screen remains dark or blank and the light on the caps lock is blinking.  What should I do???????????????????!!?!?!
    Kind regards,
    J.Miller

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like your Notebook has a blinking/flashing CAPSLOCK light and a blank screen all the time
    Please read the below shown information for better understanding:
    Capslock LED Blink 1 time : CPU not functional - Replace Processor
    Capslock LED Blink 2 times : BIOS Corruption failure - Replace System board 
    Capslock LED Blink 3 times : Memory error not functional - Replace Memory Module
    Capslock LED Blink 4 times : Graphics controller not functional - Replace either System board or Graphics card
    Capslock LED Blink 5 times : General System board failure - Replace System board
    Capslock LED Blink 6 times : BIOS Authentication failure - Replace System board
    However, I would request with you to perform the below shown step before contacting HP
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the battery too
    Step 03. Press and Hold the Power Button on the Notebook for a full minute
    Step 04. Test your Notebook with Battery and Power Adapter alone
    Note: If you are still facing the same issue try to remove and reseat the Memory Modules of your Notebook
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    I work on behalf of HP

  • Sound over HDMI works, but laptop sound isn't working after...

    Hey,
    First, sound over HDMI was not working on my laptop, but when I followed this section of Alsa Wiki it worked.
    So I created the ~/.asoundrc file containing:
    pcm.!default {
          type hw
          card 0
          device 3
    But now, when I unplug my HDMI cable, and want to listen to music using my laptop built-in speakers/jack speakers, it doesn't work anymore, even if I restart Alsa.
    In fact, I need to delete the .asoundrc file AND restart Alsa in order to get it work.
    Is there a way to make both sound over HDMI, and built-in speakers works automatically depending on if my laptop is/is not connected to my TV ?
    Thanks
    Last edited by Lowra (2012-02-14 18:26:06)

    You need to restore the card and/or device number to those for your laptop speakers, as determined by:
    aplay -l
    To do this automatically, you will need to use scripts called by udev, as described a little further down.

  • HP pavillion DV6 laptop fan isn't running to the max

    As of late my DV6 laptop's fans aren't running at max rpm as they should be during heavy loads like gaming or video processing. It'll  run normally and keep on gaining heat until it hits 80 degrees celcius by searching the web, yet the fan will still be at maybe 20-30% running capacity. When running games, it often drops my fps from 100% of its max capacity to mabye 30 to 40%. Is there a fix for this problem? I've already tried running all options of hp coolsense and I might try and get compressed air to air out the vents.

    Also apparenlty according to speedfan my GPU fan speed is 0 rpm. Could that attribute to the lack of fan speed?

  • SSD as second hard drive, now CPU fan isn't working?

    Warranty issues aside, I recently installed an OWC 115GB Mercury EXTREME Pro SSD as a second hard drive in my 27/i5 Mid 2010 2.8GHz iMac.  I did not change any other configuration setting and the original hard drive is configured as shipped.  After shutting everything up the internal fan(s) spin extremely loud (especially on the left/cpu side as you are facing the screen).  I installed istat pro and while the temperatures look good to me, it says the CPU fan is not running.  I've been searching online for days and can't find anyone else that has the same problem.  I've taken the iMac apart twice since the problem started and can't find anything broken, connected upside down, or plugged into the wrong spot.  Has anyone by chance run into this before?  Thanks for the help!  I posted a copy of the istat readings below.

    Hey,
    I heard something about this problem with 2009/2010 imacs: putting in harddrives by your self causes problems with the fan (spinning at full speed all the time), because they are using special harddrives that have a heat sensor built in. without this built in heatsensor, the system doesnt know the temperature of the hardware and runs the fan full throttle just to be sure it doesnt get to hot.
    i only have a german source for this though: http://www.macnews.de/mac/imac-2011-festplatte-lasst-sich-dank-proprietarer-appl e-firmware-nicht-austauschen-173448
    According to that source there are two ways to fix the problem: eather you use a harddrive that carries a built in heat sensor, or you put in an externel heatsensor.
    aaah: just found an english source:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs
    this should be your issue. i hope i could help!

  • Sir my laptop hp 2000 and my laptop fan not working

    sir my laptop fan 90B not working 2 year old laptop its how do  correct the problem 

    Hi,
    Identify your laptop please:
    http://support.hp.com/us-en/document/c00033108
    Please follow this HP document promptly first:
    http://support.hp.com/us-en/document/c03620929
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Fan doesn't work

    I have a ENVY 17-j161ea and suddenly one of the fans doesn't seem to work anymore. When I play a game, the laptop reboots and I get a nice screen before boot that it is dangerous to continue because one of the fans isn't working. 
    I am currently monitoring the temp and the CPU is runing at +/- 65 celcius with no load. I don't dare put any load on it... 
    The laptop is 11 months so just within warrenty however I would like to know what the odds are that HP will fix my laptop... 
    I removed the recovery partition and added an additional SSD where I installed win 8.0 on. The laptop is officially not supported for 8, only 8.1. 
    I had to to use my own OS because they didnt support installing the original OS on my own SSD... 
    I also "abused" the laptop when it came to usage. I rendered a lot on it. Some days it was rendering for 8 hours at 100% CPU. In addition to this I also am a chess player so the laptop is calculating some moves which can take a few hours and also requires 100% CPU. 
    I am worried that because of my SSD, other OS, removes recovery partition and over usage HP will simply say it was my fault and it's not a hardware fault and those fans are not designed for such a purpose. 

    Hi @Passero,
    Thank you for your inquiry, I will do my best to help!
    I see that you are getting a fan error after you have been playing a game for awhile.  Here is a link to System Fan (90b) error message on startup that will guide you through trying to resolve this difficulty.
    I understand that you have made some changes to your notebook.  If you were to remove the drive that you installed and just have the original drive in the notebook with the original OS, I think you would still be entitled to warranty.   Regardless it is worth a phone call.  Worse case scenario would be that they say no. I do know they would ask you to have only the original drive installed with the original OS.
    Please call our technical support at 800-474-6836. If you live outside of the US/Canada Region, please click the link below to get the support number for your region. Phone Assist Worldwide
    Here is a link to the HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC Maintenan....  It will have a list of all recommended replacement parts.  The fan is listed as item 13 on page 30 or Chapter 3 page 20.
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Laptop Fan Lenovo IdeaPad Y500

    Hi,
    I' trying to control the laptop fan on a Lenovo Y500.
    I followed the wiki article on fancontrol and also tryied tp-fand, but both dont seem to find any fans.
    My laptop is never going into full fan speed, one of the fans isn't working at all I think.
    I made a stress test with arch and windows and compared the results.
    Are there any other options I can try?
    binaryplease@deep-thought ~ % sensors
    coretemp-isa-0000
    Adapter: ISA adapter
    Physical id 0: +50.0°C (high = +87.0°C, crit = +105.0°C)
    Core 0: +46.0°C (high = +87.0°C, crit = +105.0°C)
    Core 1: +48.0°C (high = +87.0°C, crit = +105.0°C)
    Core 2: +50.0°C (high = +87.0°C, crit = +105.0°C)
    Core 3: +49.0°C (high = +87.0°C, crit = +105.0°C)
    acpitz-virtual-0
    Adapter: Virtual device
    temp1: +0.0°C (crit = +127.0°C)
    pkg-temp-0-virtual-0
    Adapter: Virtual device
    temp1: +50.0°C

    Is the machine supported by thinkpad_acpi? If not, this may be the reason why tp-fand is not working:
    http://code.google.com/p/tpfanco/

  • I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    I'm trying to connect my Bluetooth JBL speakers to my Macbook Pro but it isn't working. I can't seem to find Bluetooth Setup Assistant because I updated my laptop. What should I do?

    Make sure you set the speakers as discoverable, which usually involves holding down a button for a few seconds. Go to System Preferences / Bluetooth and you should be able to add it.

  • Need to re-install Creative Suite 5 to my computer after my laptop crashed. But disc isn't working.

    hello all,
    please help me!
    my Creative Suite 5 installation disc isn't working. What can i do?
    rd

    the 7 steps are needed so you can successfully download.  if you downloaded what you wanted, you followed the directions correctly.
    just make sure your serial number is for the downloaded program.  here's some help with serial numbers, http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    if you're certain you're using the correct serial number for the correct product and it still fails, contact adobe support: http://www.adobe.com/support/chat/ivrchat.html

  • Pendrive isn't working properly with my Hp laptop!

    I am using HP Probook 4441s laptop but pendrive isnt working properly in my laptop. It takes quite too many times to get connected with my laptop. I have apacer 16GB pendrive. Please help

    Hi nrony,
    Your ProBook 4441s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • My laptop fan always on

    i have HP Pavillion dv6-6c65sx
    win 7 home premium ( recovery )
    i bought my laptop a few months ago
    it had a problem
    i took it to the technical support
    they have changed the motherboard
    the problem was solved
    byt anothe proplem appeared
    my laptop always on and too loud
    even the processor is cool
    it blow cool air out of air vents
    thats mean there isn't any overheating inside
    i dowloaded a program to show me the processor temp.
    it ranged between 43 and 50 celesius
    i just want to know if i can change the rage which fan working on
    or its a technical issue and i have to go technical support

    This is the problem of the fan and not BIOS/System problem.
    At such temperature Fan always keep cooling your laptop.
    The cooler the laptop is the better working and lifespan!
    If fan makes noise, get only the fan replaced.
    | Please hit Kudos, if I help you! |
    | |
    | VA |
    |___________________________|

  • Is laptop fan supposed to keep spinning after suspend?

    Hi,
    Just purchased Asus A53U laptop, wiped the drive, and put Arch on it.
    This is the first laptop that I'm actually using on an everyday basis. So I have a question: isn't the laptop fan supposed to spin down after suspend? If so, I have a problem on my hands - it doesn't. I installed laptop mode tools, pm-utils, upower, acpid... nothing helps It looks like suspend is working as the device does turn off the screen and I get a tty-like screen right before that, and it does wake up from it correctly. However, the fan keeps spinning all the time, which is definitely killing the battery.
    Help?

    You should search in your netbook's BIOS/UEFI for something like that ; Suspend State : S1 or S3.
    S1 suspend state will keep your CPU, GPU ... awake, so with fans on.
    S3 states is an really low-energy state : Just the RAM is powered, no fans on.
    If your BIOS don't have such an option, check for BIOS/UEFI updates on the Asus website

Maybe you are looking for

  • Link from Image map to other dashboard or report

    People, I have made a image prompt of the following picture: [http://img208.imageshack.us/img208/9007/imagemap.jpg] At this moment i can only link to a value in a column with this code:      <saw:area coords="632,481,967,497" title="2002" shape="rect

  • Adding my own html

    Hi, I wanted to add background music and other stuff on my page. I know how to do this using raw html but there doesn't seem to be an option to insert some html into the site. Am i missing something. Mark.

  • Import, and interact with, Flash 8 movies in Flex3.

    Hey gang, I have a Flash CS3 App built with ActionScript 2.0 that imports Flash 8 SWFs. Those Flash 8 SWFs are each comprised of hundreds of movieclips. I'm rebuilding the Flash CS3 App in Flex 3, and even though I can import the Flash 8 SWFs but can

  • ALV to XML format

    Hi all, My requirement is to download the ALV output into XML based on the variant. For example: If my ALV displays 3 fields in the output,only those field's information should be displayed in the downloaded XML file. Your suggestions would be really

  • NI 1742 Smart Camera: Error de comunicaci​on con remote target en NI MAX

    Buenos días con todos, tengo varios problemas con mi Smart Camera NI 1742: Problema 1.- Mi camara es de puerto ethernet dual , pero ahora me sale que tiene un solo puerto Ethernet. No se como se puede arreglar este problema pues desde que apareció es