HP laptop update failed, and now it wont stop undoing changes.
When I went on my laptop today it started updating, and after an hour when it finally got to 99% it said they the update failed, and it's now undoing changes. It's been like that for over 3 hours now. How can I try to fix this?
You can try getting to Advance Boot Menu by
1. Repeatly pressing f8when the laptop boot up (Disable FASTBOOT when you are tyring to get into Advance boot menu)
2.Shift and F8 (When the first options doesn't help at all )
then use the Keyboard arrow keys to navigate around Advance boot menu and select Last known good boot configration or restore this PC (Please be minded that if you choose restoring it will restore to a back to the last known backup , as data will be lost )
Please update here if there is still any problems
Similar Messages
-
I updated itunes and now it wont open
i updated itunes and now it wont open and keeps giving me an error message MSVCR80.dll is missing. what do i do? i dont want to lose everything
Hi there,
Earlier iTunes (and supporting applications) need to be completely uninstalled before you can install the new version. Here's the complete Apple info on this: http://support.apple.com/kb/HT1923
Mobile device application will most likely fail to uninstall, so you would need to visit its location(s) and manually delete the files then folder(s). The location of the folders is documented in this link from Apple.
You won't lose your music when you uninstall iTunes. It's located in your music folder and won't be touched. -
Update failure and now phone wont turn on
please please help. as stated above the update failed and now the phone wont turn on.
i had charged the phone up so that wasnt the problem, it just said that the updater lost connection with my phone
can anyone help?
cheersYou did not specify what phone model you have.
Have a look at the link below to a post in the POK section regarding this issue.
/discussions/board/message?board.id=topfaq&thread.id=112 -
I just updated itunes and now it wont open?
I just updated itunes and now it wont open. any ideas?
Hello maddisonsf
Try downloading iTunes from the link below and run the installer that comes with it to see if that resolves the issue of not starting up for you.
iTunes 11.1.3
http://support.apple.com/kb/dl1614
Regards,
-Norm G. -
I just updated itunes and now itunes wont open
i just updated itunes and now it wont open????
Hello maddisonsf
Try downloading iTunes from the link below and run the installer that comes with it to see if that resolves the issue of not starting up for you.
iTunes 11.1.3
http://support.apple.com/kb/dl1614
Regards,
-Norm G. -
My update failed and now my phone is frozen with the apple symbol
I was updating my iPhone and it failed and now my phone is frozen with the Apple Icon. It wont turn off or anything
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to update to the most recent version of itunes but the update failed. Now when I try to open itunes I get a dialog box telling me it can,t open because MSVCR80.dll is missing. I tried uninstalling and reinstalling itunes but I grt the same message. What can I do to fix this?
Solving MSVCR80 issue and Windows iTunes install issues.
Thanks to user turingtest2 for this solution.
Solving MSVCR80 issue and Windows iTunes install issues.
If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
You may be required to boot into safe mode to complete the folder deletion process. -
I did the latest update for iTunes and now it wont open. It says my version is corrupted. Is there a way to fix it without re-installing?
Just remove and reinstall iTunes.
This has no affect on the media on the computer. -
Iphone update failed and now it's not recognized in itune at all
itune prompted the latest update. 4.3.x (not sure)... so I follow the prompt and did the latest update...
Well, it failed to update correctly and now my phone is not working at all. All I see on the phone is the itune icon with the USB port connection image on it...
itune won't recognize the phone on it's device list either.
this is very frustrating... it happen to me last year with the first iphone4 i had and it's now happening again after the second one...
HELP!!Hi,
See These Links:
http://support.apple.com/kb/HT1808
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
Device Frozen
http://support.apple.com/kb/ts1445 -
I updated itunes and now it wont open, what do i do?
I updated itunes, and not it wont open on my computer, what do i do?
Unfortunately uninstalling and reinstalling or repairing iTunes alone won't fix the problem, you need to remove other components too....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Please can anyone help? tried to update my itunes and now can not access at all and now have error message cant access as file MSVCR80.dll is missing from computer and then a further message error 7 (windows 126) . laptop and i tunes working perfectly before the update. I have tried unstalling the itunes programme and re installing but still the same error message .
both my i pads and i pods are still ok its just the i tunes.Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
3500 update failed and now off
i tried to update my nokia 3500 by nsu to the latest firmware 7.00 the dowloading completed but when its start updating and the phone driver change to
1-Nokia BB5 ADL Loader USB Phone Parent
2-Nokia BB5 ADL Loader USB Genric
an error apeare
sofware update failed
1-for optimum connectivity ......etc (((check the usb)))
2-nsu has attempted ......etc (((check the net or firewall))
and the phone now stop working but still the driver on the computer as
1-Nokia BB5 ADL Loader USB Phone Parent
2-Nokia BB5 ADL Loader USB Genric
1-i remove the battery and return it back and
2-re install nsu
3- restart the computer
nsu detect the mobile and start updating again but stop in the same point
please helpIf the phone will no longer turn on or complete the update then all you can do is take it to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
i have just updated itunes now it wont show my device to sync to in corner and all the media (mucic, movies) have red text instead of being normal .. whats going on freaking out???
Since iOS 5 has not been released yet, it's interesting you say you've already downloaded it. Trash the file you downloaded and wait for the official release. It will probably drop around 10:00 California time.
-
8820 v4.5 update failed and now nothing
I used the online system software update utility didn't everything right, rebooted my computer and now my 8820 does nothing but flash 2 red pulses. Can't turn it on, won't connect to my computer. Please help!!!
You will need to use JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
If JL_Cmder does not work, follow this instructional:
http://www.blackberryfaq.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Update failed and now big problems
Son updated his iPod touch a few hours ago and now it continues to turn itself off and on repeatedly. Tried to restore the iPod but iTunes says it is unable to due to a missing disk. Help!
Check this article:
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
Maybe you are looking for
-
Link to folder in a room - missing header area and navigation panel
Hello Community, I have a problem, again. While creating favorites to specific folders I got a problem while using and "publishing" them. While using the "send to..." feature the recipient gets an eMail with the link to this folder. When clicking thi
-
All, I am trying to create some reports using XML data Template in BI publisher. But when I just create a simple data template, I keep getting the error message as mentioned below. [111907_101025922][][STATEMENT] Template parsing completed... [111907
-
Everytime I try to download something, this **** comes upp. I don't understand why this is going on!! P.S. Anyone have any tips to bring a sluggest mbp back into action? Thank you.
-
Hi, is there a limit of characters to the attachment filename? I'm using Outlook 2010. When I add a attachment with a long name, the name gets shorten. Is there a way around? thanks for your help marco
-
I've been reading past posts on the infamous "out of memory" error in Final Cut Express HD (3.0). I've been running into it myself repeatedly and, like so many others, have a deadline to make. I captured about two hours of video in fifteen clips rang