HP laptop won't boot at all

My one and half year old Hp 2000 laptop won't boot at all. When I press the power button, it doesn't show any sign of life at all.
I have tried Hard test several times yet it didn't fix it.
Battery charges, power adapter working.
I have also tried to boot using the AC adapter alone yet my precious laptop isn't showing any sign of life.
Please how do I fix this? I need to do my assignment and prepare for my exams, and I can't afford a new laptop. Not when the current laptop is pretty new.
Please help me HP support.
Thank you in advance.

Hi @Chichiiii ,
Thank You for your inquiry.
I understand that when you power on your notebook it is unresponsive. You did state that the AC adapter is working and the battery is charging.
Here is a link to HP Notebook PCs - Computer Does Not Start (Windows 8), which has multiple links to help you determine the issue.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Laptop won't boot at all

I have a Satellite A666-S5199x. It was working fine until last week when I tried to start it I got nothing. For a day I was able to get to the BIOS screen via the F2 button but was reluctant to go through a system restore before I could back up data. Now I can no longer get to the BIOS screen: when powered up the screen says
"Reboot and select proper boot device or insert boot media in selected boot device and press a key."
I have a restore thumbdrive from Toshiba which I put into a USB port but it is not recognized or read once inserted.
Any advice?
BTW - This machine is still under warranty but I bought it in the US and am now in Australia so service does not seem to be available from either place.

Hi @andrewk1,
Welcome to the HP Forums!
It is a wonderful place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that you are having an issue with the Adapter and startup.
Here is a link to HP Notebook PCs - Testing and Using the AC Power Adapter
HP Notebook PCs - Purchasing a Replacement AC Adapter
If you can launch QuickWeb then you must have power.
Here is a link to HP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP) that should also help. Here is a link to HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista) to help determine if there is another issue.
If you would like further assistance please provide your exact model of HP G7 notebook.
How Do I Find My Model Number or Product Number?
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My Probook 4310s won't boot at all

Hi there
My probook 4310s energy star suddenly stop working and won't boot at all. Prior to this, the windows freeze couple of times and I had to power off by pressing the power button for few seconds. And this happened few times in a week (not every time I used it)
Now, when I turn it on, the laptop just show the very first splash screen, the one with the logo of 'hp invent', 'intel' and 'press the ESC key for startup Menu'. But pressing any key wont do nothing.
These are what I have tried so far.
- I tried pressing ESC, F11, F12, F10 and all of the F keys but nothing happened
- I even tried to take off the Harddrive and memory card to see if the drive or memory were faulty but it stayed the same.
- with the hd and memory back in, I tried putting in the installation dvd in the hope that the laptop will boot from it, but nothing happened.
- for several times, I let it on overnight and in the morning the screen shows the recovery menu, startup repair, etc. but choosing any option do not do anything and pressing cancel would bring me back to the original faulty state.
- When it show the startup repair menu, I could go to prompt screen and browse the hd content and every files seems to be fine apart from my c drive is now recognized as d drive.
can anyone tell me what is wrong and how to fix it? thank you very much.
It's running on windows 7 home premium 64 bit.

Hello italo_brenner,
In order to get the best and most accurate response for your question, please submit your question onto the HP commercial forums. You have posted on the consumer forum, and you're using a commercial based system. The link below will allow you to submit your question. It is possible that you might have to create another profile.
Commercial Forum
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Laptop won't boot after installing iPod Shuffle

I got a new iPod Shuffle and I installed the software from the CD provided onto my laptop (Sony VAIO running Windows 2000). Now the PC won't boot at all, not even in safe mode.
The boot starts out ok, but hangs forever with the Windows 2000 splash screen showing and the progress bar for starting up displayed.
In safe mode, the last system driver loaded was mup.exe. I followed some suggestion found on other web sites but nothing seems to help.
What has the iPod shuffle software done to my lpatop? How do I get the laptop to boot?
I can boot from a floppy. I can run the recovery from the Windows 2000 CD, but still the laptop will not boot.
Help!
Thanks
Chuck
Sony VAIO Laptop Windows 2000 PCG-FX190K - 800 MHz

As in 1st post, there is no last 'good' configuration as it is a fresh install of XP. Rolling back will just get back the default windows driver which cannot support the Nvidia NVS card. My goal is to successfully install the Lenovo Nvidia Quadro NVS 140m driver.
That said, could my problem lie with the XP version? The fresh install is XP SP0. If I update to SP3 do you think that will solve the problem (i.e. the graphics driver is written for later versions of XP)?

Laptop won't boot; Black screen w/moveable cursor

Satellite A305-S6905
Current Situation: Laptop won’t boot-up; black screen with moveable mouse cursor, HHD indicator actively flashing.
I was attempting to upgrade from Vista to Win7-32bit-Ultimate. Kept receiving error messages regarding non-compatible files. Next the computer would not recognize the Multi-Drive (did not appear on the My Computer screen. Now all I get is the black screen. How can I restore?

BTW, to reboot this PC (Windows 7), all you need to do is pres ctr+alt+delete at the black screen, and it will do just that. But if you disconnected all usb drives, then you cannot use this shortcut. You need to just shut it down with the power button.

Hp laptop won't boot up

My daughters laptop won't boot up the automatic repaire screen comes on then just goes off and try's to reboot on loop won't do anything

@Neilco15 ,
Hello and thank you for posting on the HP support forums.
Firs thing you will want to check for is any blinking LEDs on your system.
Here is a link to check out.
Troubleshooting LED Blink Codes or Beep Codes During Startup or Boot
Please post back with any results.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Won't boot at all... [will not POST]

Greets. My order from newegg just came in today and i'm quite happy with the "big" things i got-
AMD Athlon 64 3500+ (link)
MSI K8N Neo4-F (link)
Now, I'm not totally oblivious with the whole computer situation, after all, I was brave enough to build this, right? 8) The problem I am having lies in the fact that the computer just won't boot at all. Eventually I turned on that D-Bracket into JDB1. So far it has got Yellow and Red LEDs which stay on. The book tells me that the processor is installed incorrectly. I'm pretty sure it's lying as I have checked it many times (please don't make me take off that heatsink/fan again) and the chip is FIRMLY set in it's place. Alas, the screen stays black (running off of a sapphire card) and nothing happens. I would expect to AT LEAST get a BIOS screen to see where I messed up my SATA configuration (as I'm sure I did...)
But, if anyone has seen a problem like this or knows a solution, please give me a shout. It is very much appreciated
edit: after lurking more (link) I have decided that i'm not at fault, it is, indeed, the graphics card and/or monitor that are not working. I get:
which, according to this post, means that I should be in the clear for BIOS set up. Nothing is displayed on my screen! :( Help!
Thanks.
Sean

Quote from: Supershanks on 12-May-05, 08:28:54
1) Do u have any usb cables from your case front panel or Flash card/drive or usb hubs connected to the mobo if so unplug them.
2) Switch off computer & unplug mains lead the remove a module of memory leaving the remaining 1 in slot1 (nearest CPU)
if 1 doesn't apply or doesn't give any change try 2.
1 does not apply, the only external devices i have attached are a monitor, keyboard, mouse (all os/2, not usb) and of course our friendly D-Bracket.
I have unplugged all IDE devices and SATA devices. All that's in there is the 1 GB of RAM (it's a 1gb stick, not 512mb), graphics card and processor, still no picture :(

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

Hey, I just installed ML on my OCZ Octane SSD, everything went ok, However, it got stuck while rebooting and now I can only see flashing question mark icon and ML won't boot at all. Only in safe mode...

It looks like ocz is aware of the issue and trying to address it via firmware:
http://www.ocztechnologyforum.com/forum/showthread.php?103700-Mountain-Lion-and- OCZ-Octane-Petrol-and-Octane-S2-SSD-s
It's a shame because apple is clearly the party that changed something.

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all

I have tried to update from Leopard to Snow Leopard using disk. New OS wouldn't load and now laptop won't start at all. Simply get the Apple logo and the clock below and then after about 10 mins the laptop switched itself off. The Snow Leopard disk is a brand new family edition. Error message when attempting to install was that "this software cannot be installed on this disk".

Thanks Fred, but I've tried '''ALL''' that already.
I '''THINK''' I might have found the problem - the Profiles folder has been locked by inherited properties from the levels above. I have had to go all the way up to my User folder and reset ALL the properties from there down to be unlocked so that I could remove the prefs.js file so that it could be recreated on the next launch of FF. Exactly why my User folder is locked in such a way as to stop me/FF making changes when I have been able to alter preferences at will in the past, I don't know ...
So far, so good. I have since done a complete shutdown and when I restarted this morning, FF seems to be behaving itself ...
flashfletch

My laptop won't boot and caps lock blinking continuously (1blink in 4 sec.)

Sir,
Today morning I turned on laptop but laptop won't boot and wireless button glowing continuously and also caps lock blinking continuously as 1 blink per 4 sec.

do you mean 1 blink repeating and then a pause and 1 blink repeating again? The diagnostics show that as a CPU not functional issue.http://support.hp.com/us-en/product/HP-Pavilion-15-Notebook-PC-series/6529948/model/6622489/document/c01732674#AbT2 Try a hard reset.Follow the instructions at the following web page.http://support.hp.com/us-en/product/HP-Pavilion-15-n209tx-Notebook-PC-(ENERGY-STAR)/6529948/model/6622489/document/c01684768 If a hard reset does not help, then contact HP for warranty service. Is your notebook still in warranty?Check your warranty status Here.

My laptop won't boot-up,won't let me get to the boot menu . can anyone help me,please.

Laptop won't boot-up,won't bootmenu.

Hi Willrobb1,
I understand your computer will not boot up. Restart your computer and keep press F9 to open the "Boot Menu" or "Boot Device Options". Press Enter to continue.
Here is a document on system restore if you need it. You can restore it to a previous point when it was working correctly.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01835735&lc=en&product=5218386&tmp...
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Laptop won't boot beyond the screen showing "Tobshiba leading innovation"

I installed an antivirus recently and in its scan some viruses were found. Those viruses were deleted and now my laptop wont boot into windows. It just stays where "toshiba" logo is displayed. My laptop is running on windows 8.1. I have a recovery DVD, but the laptop won't boot from the DVD either. Is there a way to get my laptop to boot windows without doing a factory reset. Please help!!

Try the Troubleshooting Assistant or the suggestions in this article.
What can I do if my Windows 8 laptop won't start?
- Peter

Laptop won't boot 10

So my Asus laptop won't boot up Windows 10 and I've tried to "Refresh" it but it won't work. It worked once after I installed it but I couldn't even access the App Store. Help!

Hi,
What is your current situation?
If Windows 10 has low performance on your laptop, you may take a check at the system requirements :
System requirements
You may alos contact the manufacturer and see if they could offer any further help.
For the current situation, you may consider install Windows 10 using Virtual Machine:
Step-By-Step: Creating and Running A Windows 10 VM on Windows 8.1
Best regards
Michael Shao
TechNet Community Support

Laptop won't boot, will not do a windows repair, received a hdd error 0303.

laptop won't boot, will not do a windows repair, received a hdd error 0303.

Hi,
The error code is a short Disk Self Test failure and would indicate that the Hard Drive is failing and needs to be replaced. This is also consistent with the start-up issue.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of the notebook - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Help! Laptop won't boot past MSI logo

Please help.
My MSI GT60 laptop won't boot past the MSI logo.
I also can't access the BIOS.

Quote from: rob.kernaghan on 10-January-15, 03:07:55
Please help.
My MSI GT60 laptop won't boot past the MSI logo.
I also can't access the BIOS.
so your laptop freezes at MSI logo and if you spam or press DELETE button few times on boot do you then only get "-" line? if so then either it's bios has hanged itself so if your able to access cmos battery from back area where you can access hard drive, ram and such then disconnect cmos battery leave it disconnected for 15 mins also make sure ac and battery is disconnected to once done put cmos battery back and then actuall battery and try with starting the laptop and see if it passes by MSI logo if it hangs again at MSI logo then spam Delete and see if you can enter bios but if bios throws an black screen with "-" again then you would have to RMA your laptop since it sems something is wrong with your motherboard causing bios not wanting to work propertly.

HP laptop won't boot at all

Similar Messages

Maybe you are looking for