Hp Laser Jet 1020 network printing fail over win7 and Vista

Printer prints fine when is connected to computer trough USB but when shared over the network between Vista or 7 and another PC tries to print. Jobs stays in the queue labelled 'Printing' but nothing happens.
Printing over the network only works when 'Print Spooler' is manually stopped and then restarted on the PC the printer is connected to for each job!
Printer used to work fine under XP with network sharing.
On local and networked PC, the printer use port "USB001"
Searching trough many forums i found this problem sill remains unsolved for 1020 and some other printers.
I have to admit that i had test all available versions of a driver.

Have you tried to setup the Local Port using, \\Win7Computername\Printername on the other computer?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Hp laser jet 1020 is printing blank pages after it fell off my desk

The printer appears to run just as it did before it fell on the carpeted floor, but the pages come out blank. Can it be repaired or is it toast?

Hello,
Please click HERE to access the steps that should resolve the issue .

Laser Jet 1020 will no longer print Internet/email. Error message is res://ieframe/dll/preview.js

Laser Jet 1020 used to print just fine from internet explorer. Suddenly it quit printing and I get an error message res://ieframe.dll/preview.js The bottom of the error message asks if I want to cancel script. Prints fine from other windows applications. From the Internet, the correct printer is selected? Any suggestions?!
Laura

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Can't print to hp laser jet 1020 printer connected to airport express

Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.) Now I want to connect my usb hp laser jet 1020 printer the airport express to print from. I have a windows 7 machine. I can see the printer connected to the airport express through the airport utility. I have tried to use the bonjour print service to set up the print connection. Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track? Any other suggestions?
Thanks.

Does "plugged into it" mean that the printer is connected using USB or Ethernet?
If USB, have you run Bonjour for Windows to find and configure the printer? (Pages 16-17 in the Setup Guide)
Bonjour Print Services for Windows v2.0.2

HP Laser Jet 400 Color Printer won't print from my mac but will from others on the network.

My HP laser jet 400 color printer will not print from my mac except when I send a test page. The other printers on the network are printing with no problems. Has anyone else had this problem? Help?

Hello ElizabethF,
Welcome to the HP Forums!
I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My hp laser jet 4050N stopped printing. What can I do?

My hp laser jet 4050N stopped printing. What can I do?

1. Please provide the year model of your iMac and which OS X it is running.
2. Reset your Printing System,
for 10.9 see > OS X Mavericks: Reset the printing system
for 10.8 see > OS X Mountain Lion: Reset the printing system
for 10.7 or earlier see > Mac OS X: How to reset the printing system
3. Test your printer, try printing from a different computer.
4. Go to HP > Troubleshooting Guide for Laptops, Printers & More | HP ® Support

Where can I get an HP Laser Jet 5 Basic Printer driver

Where can I get an HP Laser Jet 5 Basic Printer driver, besides using the windows Update button.

Here is the product page for the Laserjet 5p/mp page. This will be the best place to find what you need. If it is not listed here, then the only other place to get the driver is through windows update.
Laserjet 5p/mp
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Laser Jet CP 1525 prints everything too dark. All cartridges OK. How can I lighten the print?

Laser Jet CP 1525 prints everything on paper too dark. All cartridges OK. How can I lighten up the print? Where can I adjust brightness?

Checked with the support service ... Cannot be adjusted. Suggested solution: try different driver; Did not work, no change. Thank you, HP. Once my cartridges run out, a new printer will be bought. Not HP. Promise.

I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

I am running Windows365 and I can't get my laser jet 2015 to print. It is labeled as "offline".

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - LaserJet.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP laser jet P3005 PCL6 printer ( without DIMM or SIMM device)

Hi folks,
HP laser jet P3005 PCL6 printer ( without DIMM or SIMM device) can print barcode from smartform or not ????
i can see the barcode in print preview but can not see the barcode in print??
plz advice. it's urgent.
Thanks
pabitra

Just call to customer service of printer company ,you get more information.
if you get barcode in print preview ,if not in printer then you must install other devices.
Thanks
Seshu

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

HP Laser Jet 1020 printing again the last job

Hello there!
I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
I have checked the printing queue before turning OFF the computer and it is empty.
This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
Thanks!

Hi, have you tried to disable bidirectional support'?
Devices/Printer > right click your HP printer icon > Printer Properties > Ports > uncheck 'enable bidirectional support > APPLY
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP Laser Jet 1020 Printing is Moody - Drivers can't delete

I have a W7 Laptop & an HP LaserJet 1020 which has been working like a charm. I left for a month with my laptop.
Upon my return, my printer has become 'selective':
From MS Word - It will print a blank page
From a PDF - Nothing will print, yet no error message
A picture - will print
(I have yet to check MS Pub.)
I have tried to uninstall the drivers but it tells me that there was an unexpected error.
I tried using the CD to 'repair' the drivers, but the problem persists, and I couldnt delete the drivers after 'reinstalling them'.
The one that saves the solution earns a halo

Sorry that you are having a problem with your printer from MS Word and PDF. It seems that a communication error may have occurred.
Perform a hard reset on the printer. Unplug the power cord from the back of the printer. Leave it out for 30 seconds and plug it back in.
Also reboot you computer.
Then try to print. If it doesn't print, then try to UNINSTALL the software and drivers again.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Laser Jet CP1025nw: Duplex printing not available from Mac

I just bought a new HP Laser Jet CP1025nw printer and have installed it for wireless use. When trying to print from my Mac (OS X 10.9.3) the option for (manual) duplex printing is not showing up (greyed out) in the print dialogues in applications (e.g. Microsoft Word, Adobe Acrobat Pro).
How can I get duplex printing workingfrom my Mac?
Thank you!
This question was solved.
View Solution.

Cool! That worked for me! Thanks!

Laser jet 1022 not printing

I'm operating Windows 7 and reinstalled deivers to my Laser Jet 1022. It prints form adobe and MS Office applications, but not from
email (aol) or internet screens. When not printing an error message shows "unexpected call to method or property access."

Did you resolve this? I an having the same problem (on my Windows 7 laptop)

Hp Laser Jet 1020 network printing fail over win7 and Vista

Similar Messages

Maybe you are looking for