HP Laser Jet 1020 printing again the last job

Hello there!
I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
I have checked the printing queue before turning OFF the computer and it is empty.
This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
Thanks!

Hi, have you tried to disable bidirectional support'?
Devices/Printer > right click your HP printer icon > Printer Properties > Ports > uncheck 'enable bidirectional support > APPLY
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

Can't print to hp laser jet 1020 printer connected to airport express

Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.) Now I want to connect my usb hp laser jet 1020 printer the airport express to print from. I have a windows 7 machine. I can see the printer connected to the airport express through the airport utility. I have tried to use the bonjour print service to set up the print connection. Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track? Any other suggestions?
Thanks.

Does "plugged into it" mean that the printer is connected using USB or Ethernet?
If USB, have you run Bonjour for Windows to find and configure the printer? (Pages 16-17 in the Setup Guide)
Bonjour Print Services for Windows v2.0.2

HP Laser Jet 1020 Printing is Moody - Drivers can't delete

I have a W7 Laptop & an HP LaserJet 1020 which has been working like a charm. I left for a month with my laptop.
Upon my return, my printer has become 'selective':
From MS Word - It will print a blank page
From a PDF - Nothing will print, yet no error message
A picture - will print
(I have yet to check MS Pub.)
I have tried to uninstall the drivers but it tells me that there was an unexpected error.
I tried using the CD to 'repair' the drivers, but the problem persists, and I couldnt delete the drivers after 'reinstalling them'.
The one that saves the solution earns a halo

Sorry that you are having a problem with your printer from MS Word and PDF. It seems that a communication error may have occurred.
Perform a hard reset on the printer. Unplug the power cord from the back of the printer. Leave it out for 30 seconds and plug it back in.
Also reboot you computer.
Then try to print. If it doesn't print, then try to UNINSTALL the software and drivers again.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Laser Jet 1020 will no longer print Internet/email. Error message is res://ieframe/dll/preview.js

Laser Jet 1020 used to print just fine from internet explorer. Suddenly it quit printing and I get an error message res://ieframe.dll/preview.js The bottom of the error message asks if I want to cancel script. Prints fine from other windows applications. From the Internet, the correct printer is selected? Any suggestions?!
Laura

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Run the HP Update Tool from Start Menu > All Programs > HP if your printer installs it, rebooting afterwards if necessary.
7) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it. Do you know what changed between 19.8 to 19.13?

How do I use my HP Laser Jet 4M printer work with my OS 10.9 MacBook Pro

A "newbie" here. I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer. HP apparently does not support the Mac's OS10.9. Any help appreciated.

Ok, I've downloaded the drivers as suggested.but still not printing as it should.
It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
Meanwhile, any other advice.
Regards

How do i install a hp laser jet 4l printer on windows7

how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

The driver is delivered through Windows Update as described here.
You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable. The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to print in the last page of the script..?

Hi,
I am working on a script. I have a header window and one main window. In the main window, I am printing the line items of the Invoice. Once the line items finish, I have to print the sub totals there. and also to print the company agreement details(around 10 lines of text) in the last page of the script.
So, <b>how to print the agreement details in the last page of the script..?</b>
Can anyone provide me a sample code to find the last page of the Script layout..?
And regarding writing the agreement details, is it better to hard code the text or use the standard texts..? which one is better..?
Regards,
Paddu.

HI,
Just create a Standard text, if you are going to use this standard text in other layouts also... and use it otherwise you can hard code it as this its of only 10 lines.
declare one more element in the main window itselft and call it atlast it would print in the last page..
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'FOOTER'<b><- This element should contain the agreement details</b>
FUNCTION = 'SET'
TYPE = 'BODY'
WINDOW = 'MAIN'
EXCEPTIONS
ELEMENT = 1.
Thanks
Mahesh

Hp Laser Jet 1020 network printing fail over win7 and Vista

Printer prints fine when is connected to computer trough USB but when shared over the network between Vista or 7 and another PC tries to print. Jobs stays in the queue labelled 'Printing' but nothing happens.
Printing over the network only works when 'Print Spooler' is manually stopped and then restarted on the PC the printer is connected to for each job!
Printer used to work fine under XP with network sharing.
On local and networked PC, the printer use port "USB001"
Searching trough many forums i found this problem sill remains unsolved for 1020 and some other printers.
I have to admit that i had test all available versions of a driver.

Have you tried to setup the Local Port using, \\Win7Computername\Printername on the other computer?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

About getting hp Laser Jet 1320 Printer Driver Softwear

Dear Team Leader,
I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
Yours Ever
Mr_Shehub

Hello Bholla,
Welcome to the HP Support Forums!
I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
Let me know if that works any better for you
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP 1300 Laserjet & HP 2605dn Laser Jet printers print density problem

I have both an HP 1300 b/w and HP 2605dn color laser printer. In the last week both printers have changed the output density. The 1300 print is coming out lighter than it used to, and the 2605 is not print the color tones as it used to. What used to be orange is now only yellow.Other colors are not right either. I can compare them to output a few weeks earlier, and they are much lighter and different color tones.
Both printers have plenty of toner in all cartridges. The toner cartridge on the 1300 was changed 2 weeks ago. The toner on the 2605 is 3/4 full.
This was like something got into the printer drivers and reset some parameters on both printers at once.
Can anyone help me here to check this out and how to correct the problem?

I have the same problem with my laser printer 2605dn. the color is pale, i replaced the cartridges with original hp's but it did not help. I also lost the capability of double side printing that I had when I originally loaded the printer drivers. I noticed this all after I checked the internet for software updates for my printer. Are there any solutions for these problems?
please let me know.

Hp Color Laser Jet 5550dn Print Quality Issues

Good Afternoon,
I have a Hp Color Laser Jet 5550dn that has some print quality issue. I've attached a black and white scan, but the color is a light blue to blue that form the blotches. On the back of the page there are blue and pink streaks.
I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

I want to print only the last message in a thread of messages

I have to keep hard copies of e mails.
The problem is that as a trhead gets added to it means the print outs get longer and longer and are of course repatative
Is there a setting that allows me to only print the most recent mail in a thread?

Have you tried to open the last message in a new window?
If that includes the messages you do not want to print, you could limit the printing to e.g. the first page (in the print dialog).
For more advanced options you could look at the [https://addons.mozilla.org/nl/thunderbird/addon/printingtools/ PrintingTools add-on].

HP Laser Jet 1020 printing again the last job

Similar Messages

Maybe you are looking for