HP Laser Jet 200 Mac system error 79 can't find IP address cannot connect to router

I cannot print anything. The printer gives me a 79 system error message. I've restarted the printer and my computer a dozen times. The IP address for the printer is nowhere to be found. My router is a cisco Lynksis E1000 and is working.
Please help.

Hi,
What is the exact printer model? there are 4 different models of the Laserjet 200 Serieses
If the printer is connected with an Eterhent cable, unplug the cable and temporary plug a USB to the computer, for wireless simply plug a USB and update the latest firmware which referenced as following:
Fixed a 79 error when printing certain documents.
For the Laserjet 200 M276n or M276nw use the following firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108132-6&cc=us&dlc=en&lc=en...
For the Laserjet 200 M251n or M251nw use the following firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108135-7&cc=us&dlc=en&lc=en...
Once the updaet completes unplug the USB  and reconnect it to the network if required and check again.
If the same persists and the printer is connected with an Ethernet cable, may the error disappears by unplugging the ethernet cable and restarting the printer?
If it does, try a different LAN port or a different cable and check for any difference.
Hope these steps may help, for any issues please clarify the exact printer model and how it is connected to your Mac.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • My hp laser jet 4050N stopped printing. What can I do?

    My hp laser jet 4050N stopped printing. What can I do?

    1. Please provide the year model of your iMac and which OS X it is running.
    2. Reset your Printing System,
    for 10.9 see > OS X Mavericks: Reset the printing system
    for 10.8 see > OS X Mountain Lion: Reset the printing system
    for 10.7 or earlier see > Mac OS X: How to reset the printing system
    3. Test your printer, try printing from a different computer.
    4. Go to HP > Troubleshooting Guide for Laptops, Printers & More | HP ® Support

  • HT1926 Attempting to update Itunes, received System Error: "program can't start because MSVCR80.dll is missing form computer" try reinstalling the program to fix problem. Question , if reinstall Itunes via download, do I lose my music library?

    Attempting to update itunes, received system error" Program can't start because MSVCR80.dll is missing from computer, try reinstalling the program to fix the problem. Question, I can't access Itunes to backup library, how do I reinstall without loosing music library?

    It doesn't matter and doing a manual install will not fix the problem either.  I'm looking for a solution but no luck yet.  I think Apple has given us a bad update.

  • System Error-Program can't start because MSVCR80.dll is missing

    How do I fix
    System Error
    Program can't start because MSVCR80.dll is missing-This ion a Laptop running Windows 7 64 bit

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

    I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

    Hello,
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    Thank you.

  • WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

    Summary:
    I have installed Windows 7 Ultimate x64 on my G580.  Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
    Details:
    I bought lenovo G580 with Windows 8.  Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64.  Everything is working fine but my WLAN card is not recognized because of lack of driver.
    The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
    I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error.  I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
    Error -  "BCM4313: Can not find setup file"
    Drivers Tried:
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028105
    - http://support.lenovo.com/en_US/downloads/detail.p​age?DocID=DS028208
    Any help about how to get past this error will be appreciated.  The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder.  Let me know if I can copy a specific file from there.
    Thank you.
    BJS
    Solved!
    Go to Solution.

    Download this driver bcm4313
    Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
    And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

  • HT1341 I have a new mac pro with Mountain Lion 10.8.1 but cannot connect to my Canon 6000B printer and can't find a driver download on the net - can anyone help on this?

    I have a new mac powerbook pro OS X 10.8.1 and cannot connect to my canon 6000B printer - the printer appears in the printer list but will not install and I can't find a driver on the net - does anyone know what the solution is?

    dino1335 wrote:
    Thanks for getting back. I need help here
    1 What do you mean by System Information? Is that System Preferences?
    System Information is located in Applications > Utilities. It shows lots of information about your Mac, including information about the printer queues.
    dino1335 wrote:
    2 When I go to System Preferences and click on the printer LBP6000/LBP6018 there is no information in that window about the URI if I click Open Print Queue there is no information other than the ID of the printer
    In previous versions of OS X you did see this information via the Options & Supplies pane for the selected printer in Print & Scan. But with 10.8 this information was removed so know you need to use System Information > Printers to see information about an installed printer.
    dino1335 wrote:
    3 If I print a document it just goes to print (it goes through the printer but no information is printed on the paper) there is no print cue so I don't know where to find the information on the URI or what I am supposed to copy
    I believe that the document does not print because the print queue has not been created correctly. The CAPT driver requires a specific queue name and if the queue name is wrong then you will not be able to print.
    dino1335 wrote:
    FYI I also have a MacBook Pro (old) with Leopard which I also print to the same printer on and there isn't a problem with that just with this new MacPro which has Lion installed
    Not surprised to read that. Mtn Lion has caused some issues for owners of CAPT printers, especially if they upgraded to 10.8 from 10.7 or 10.6.
    Since you mention the ability to print on 10.5, I just want to check that you are physically moving the USB cable connected to the LBP from the 10.5 Mac to the 10.8 Mac, rather than sharing the printer from one Mac to the other. Because if you are sharing the printer from the 10.5 to the 10.8 Mac then this can be a cause of your current issue. The CAPT driver does not work when it is being shared to other Mac's.

  • I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work)

    I keep getting an error when trying to update an app- cannot connect to store. I logged out from my account and tried to log back in and got the same error. I am doing all this from my phone since I no longer own a personal computer (only work) since I use iCloud and I tunes match

    YAY!!! Saved it in my Mac's Firefox Bookmarks for easy future access!
    Hope you are having a lovely afternoon today! I'm about ready to go bobo....I have an early meeting, and I don't want to oversleep! The nice part is that I work remotely, so I only have to wake up 15 minutes or so before the meeting.... I don't even use an alarm clock anymore (really, my iPhone alarm, which is much more pleasant), unless I have to get up at 6:30 or something....
    TMI?
    GB

  • I downloaded yosemite as the new operating system but I can't find iphotos since then

    I restored my mac to factory settings and downloaded yosemite as the new operating system but I can't find iphotos since then. When I go into Icloud it takes me to apple page. PLease help!
    <Re-Titled By Host>

    1 - you need to update your profile as you state that you have OS X 10.6.3 in it
    2 - for Yosemite you need to backup your iPhoto library and install iPhoto 9.6 from the App store - if you are upgrading from iPhoto '08 or earlier you need to also run the iPhoto Library upgrader prior to launching iPhoto 9.6
    3 - Your photos are NOT in iCloud - it is not a place to store photos - it is only to move photos between devices (MyPhotoStream) or people (shared PhotoStreams) - they are (by default) in the iphoto library in your pictures folder - if you did not backup your iphoto library prior to erasing you disk then they are gone
    LN

  • Help with close bridge error, I can't find where bridge is still open.

    I'm trying to install In Design. I'm getting an message to close Bridge.
    So I exited Bridge, didn't help.
    I went to task manager>processes and endedbridge.exe, didn't help.
    I opened Bridge, turned off the option of starting at log in, logged out, logged back in again and started the install again. Still didn't help.
    I've looked through task manager processes and I can't see any that would be related to bridge but I'm still getting the error.
    I've looked through the "working with your operating system" link, and can't find anything there that is open.
    I'm running Windows 7.

    Ah ha! I think I worked it out. I ticked "show processes from all users" and another account had bridge.exe running.  Ended that and it seems to be working, yay!
    I'm answering my own question for others who may have the same issue

  • When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    When I attempt to connect to iCloud I get the error message: Apple id's email address cannot be verified.  There is nothing wrong with my apple id and I do not want to change it.Any suggestions?

    Debi....
    Try "resetting" your Apple ID password >  Apple - My Apple

  • My computer crashed necessitating re-install of op sys and all programs including iTunes. At the iTunes store when I click a song in my library get error message "can't find, do you want to search?" What's happening? How can I listen to my library on this

    My computer crashed necessitating re-install of operating sys and all programs including iTunes. When I click on a song in my library I get an error message "can't find this song, want to search?" What gives? How can I listen to songs in my library on this computer now?

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • Error(2): Unable to find class for bean: connection defined by tag...

    I created a project, and a JavaBean that connects to the database and I want to use it in a JSP page that exists in my project.
    Bean:
    package BeerPackage;
    import java.sql.*;
    public class ConnectionBean
    JSP:
    <%@ page import="BeerPackage.*" contentType="text/html;charset=windows-1252"%>
    <jsp:useBean id="connection" class="ConnectionBean" scope="session"/>
    Then I get the error:
    Error(2): Unable to find class for bean: connection defined by tag with class: ConnectionBean
    When I try to build the JSP
    Any ideas?

    Seems even though I have an import, I still have to specify the package name in front of the useBean.
    What am I missing here?

  • HT1338 I dont have icloud as an icon in my system preferences, how can I find it or add it?

    I dont have icloud as an icon in my system preferences, how can I find it or add it?

    What operation system are you running?

  • Henever I am in Mozilla I get a pop up saying my PC has 7 window errors and can run faster. I cannot see how to get rid of this.

    I tried to download Tetris yesterday onto my laptop - not quite what you would call an ambitious gamer!
    As it was doing so I noticed that the software was trying to alter some settings in the registry.
    Now whenever I am in Mozilla I get a pop up saying my PC has 7 window errors and can run faster. I cannot see how to get rid of this.
    When I copy the link location it says:
    https://secure-ams.adnxs.com/click?KGIRww5jtj8oYhHDDmO2PwAAAICXbtI_KGIRww5jtj8oYhHDDmO2Py8cBrFeTaRkUe4MK_5ewBbHVyJRAAAAAMypEAA_AQAAPwEAAAIAAAAwB0YA6-ECAAAAAQBVU0QAVVNEACwB-gDulQAA42kAAQMCAQUAAIQARiCzrAAAAAA./cnd=%21ngVsMQjTqzoQsI6YAhjrwwsgBA../referrer=https%3A%2F%2Fwww.google.co.uk%2F/clickenc=http%3A%2F%2Fappround.net%2Fpcperformer%2Fst6%2Fpcperformer-st6.php%3Fcid%3D3902%26tid%3Dams1CNHcs9ji35fgFhACGK-4mIjrq5PSZCIOMjEzLjc4LjE0NC4yMTQoAQ..
    and here is the image
    Any ideas?

    Such a pop-up is likely caused by malware installed on your computer.
    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *Malwarebytes' Anti-Malware:<br>http://www.malwarebytes.org/mbam.php
    *SuperAntispyware:<br>http://www.superantispyware.com/
    *Microsoft Safety Scanner:<br>http://www.microsoft.com/security/scanner/en-us/default.aspx
    *Windows Defender: Home Page:<br>http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
    *Spybot Search & Destroy:<br>http://www.safer-networking.org/en/index.html
    *Kasperky Free Security Scan:<br>http://www.kaspersky.com/security-scan
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Maybe you are looking for