Hp Laser Jet 4000 Printer

I am recently experiencing problems with my printer that it prints a very bold black thick border on the bottom of each sheet printed, and sometimes even with ink crumbs on it, that can make you black, anything i can do to stop that?

@cj08
I am not sure what type of drivers you are looking for however these drivers are available via the windows update feature in both windows 7 and windows 8/8.1.
Please look at this document for more information on how to obtain the drivers via the windows update feature.
Driver support in Windows 7 or in Windows Update
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

Similar Messages

HP Laser jet 4000 Refurbished

Hi.
Thank you in advance.
i have purchased a refurbished HP Laser Jet 4000 to replace the one I was using. The new one prints out the test page. When I type a Word doc "test page" and push "print" the screen on the printer says "received data", then says "processing job". Then, goes back to "Ready" without printing the job.
I am using a Dell with Windows XP service pack 3.
There is no error message.
Thank you, again.
Zongwriter

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How do I set up a Laser Jet 4000 to work wirelessly?

How do I set up a Laser Jet 4000 to work wirelessly? I followed the prompts but don't know what IP address to enter. Is it 192.168.1.1 or is it unique to us? We have Verizon FIOS. Where can I find the best ongoing support online?
In looking at similarquestions here (unanswered, from 2009) I saw that someone bought a wireless printing kit. Do I need
to do so and where can I buy it?
Do I need to connect it to the wireless router and if so, which connection on the printer do I use?
Thanks.

Do I need to connect it to the router, and, if so, which connection should I use (serial, # pin, etc.)

Laser Jet 4000 Parallel Port to USB

I have a Laser Jet 4000 that I've tried to connect to my new computer using a parallel to USB cable. Now when I shut down Windows XP I get a Blue Screen and the computer does not shut down automatically. Sometimes I get a message that there is a driver/device conflict. When I disconnect the USB cable to the printer, the problem disappears. What can I due to get the Laser Jet 4000 to work with Windows XP properly?

You could purchase and install an IEEE 1284 card on your PC, which will have a parallel port on it. This way, you can connect the printer directly to the PC. You could also install the latest drivers for the Parallel-to-USB converter and see if it helps.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

How do I use my HP Laser Jet 4M printer work with my OS 10.9 MacBook Pro

A "newbie" here. I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer. HP apparently does not support the Mac's OS10.9. Any help appreciated.

Ok, I've downloaded the drivers as suggested.but still not printing as it should.
It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
Meanwhile, any other advice.
Regards

How do i install a hp laser jet 4l printer on windows7

how do i install a hp laser jet 4l printer on windows7 Where do I get the drivers

The driver is delivered through Windows Update as described here.
You could also use the Windows 7 driver finder tool at http://www.hp.com/go/tools.
If you do not have a parallel port on your Windows 7 machine you may need a USB-parallel converter cable. The models mentioned in the posts tagged here have been verified by users to work in Windows 7.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Mac OSx 10.8.5 and HP laser jet 2100M printer w/ driver version 19.8--Doesn't print!

I've got a macbook pro with Mac OSx 10.8.5. I've successfully printed with my HP Laser jet 2100M printer until recently. The driver version is 19.8. I don't know what changed but about a month ago the printer says "printing--connected to printer" but it never prints. What do I need to do to get my printer and my macbook to communicate again and start printing? I also have a mac mini desktop running on mac osx 10.7.5 and it doesn't talk to the HP Laser jet 2100M either (also driver 19.8.Please, can you tell me how configure so these macs will be able to print to my printer?

I have had a similar issue with my HP LaserJet 1320 printer on OS X 10.8. On certain PDF files (only those that I have tested so far), the data will send fine from the computer (and the job goes away) but the printer balks and drops the print job on its end. It's only when I save it as an image in Preview and then print will it work (advice from this forum post). However, when I updated the driver from 19.8 to 19.13 (in the Apple Software Update), it seemed to fix it. Do you know what changed between 19.8 to 19.13?

Can't print to hp laser jet 1020 printer connected to airport express

Hello All - I recently bought an airport extreme so I am doing some re-configuring of my home network but I am having issues getting the desired out come.
I have the airport extreme connected to the modem. From the extreme in another room, I have an airport express connected to the airport extreme wirelessly (I set that up through the airport utility without any problems.) Now I want to connect my usb hp laser jet 1020 printer the airport express to print from. I have a windows 7 machine. I can see the printer connected to the airport express through the airport utility. I have tried to use the bonjour print service to set up the print connection. Bonjour sees the printer connected as well, I run through all the prompts and click finish, but when I go to print something, it goes to print que and nothing happens. (side note, the printer works just fine when connected directly to the computer).
So I guess my question is, it appears the computer sees that my printer is connected to the airport express. But some point along the way, when I go to print, the message gets lost or goes to the wrong place. I am on the right track? Any other suggestions?
Thanks.

Does "plugged into it" mean that the printer is connected using USB or Ethernet?
If USB, have you run Bonjour for Windows to find and configure the printer? (Pages 16-17 in the Setup Guide)
Bonjour Print Services for Windows v2.0.2

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the hp laser jet p3015 printer?

What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
Some telltale signs that an AirPort has (or is about to fail):
Status lights are not illuminated or do not match any of the known configurations.
Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
Unit refuses to intialize, even after performing multiple "factory default" resets.
Weak or no wireless signal.
Ethernet port(s) not functioning
Etc.
Also, are there any compatiility issues with newer models and G5/G4s?
Three potential issues:
Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

Help, Upgraded to Yosemite and now my HP Laser jet 1320 printer will not work!

Two days ago I upgraded to Yosemite on my Imac. Now my HP 1320 Laser jet will not print at all!!! I need a printer for my eBay business ASAP and this is not good. The printer is a driver version 19.8 Is it compatible with the new program? I am so frustrated.

Hello k1watt,
Thanks for using Apple Support Communities.
From your post I see that you're unable to print to your HP LaserJet 1320 series after upgrading to Yosemite on your Mac. I defintely understand how frustrating this is, especially since printing is vital to your business. The printer driver version 19.8 is the most current version available. To troubleshoot the issue however where you're unable to print, please follow the steps in the article below.
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel.Note:If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
UseSoftware Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Deletethe affected printer, thenaddthe printer again.
If the issue persists, try these additional steps:
Resetthe printing system, then add the printer again.
If the issue still persists,resetthe printing system again. Download and installyour printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Troubleshooting printer issues in OS X - Apple Support
OS X: Printer and scanner software available for download - Apple Support
Take care,
Alex H.

Hp Color Laser Jet 5550dn Print Quality Issues

Good Afternoon,
I have a Hp Color Laser Jet 5550dn that has some print quality issue. I've attached a black and white scan, but the color is a light blue to blue that form the blotches. On the back of the page there are blue and pink streaks.
I can print more sample pages or print them in color, but anyone have any idea what could be going on here?

We are encountering a similar problem. The streaking is coming fromt the Cyan cartridge and has continued for over a year now, despite numerous cartridge changes and replacing the transfrer case. It is progressively getting worse and I have yet to find a solution to this problem online. Any help or guidance would be appreciated.

About getting hp Laser Jet 1320 Printer Driver Softwear

Dear Team Leader,
I have lost my HP Laser Jet 1320 softwear CD. I want do download from Internet. Would you please help me by showing an easy way to get it?
Yours Ever
Mr_Shehub

Hello Bholla,
Welcome to the HP Support Forums!
I understood that you have recently installed Windows 7 again, since the LaserJet 1022n will not install. If you are getting "turn printer on" messages when the printer is on, you have to check the USB connection between printer and computer.
Have you tried to installed using the HP full feature software and drivers for this printer? If not it is a free download: HP LaserJet Full Feature Software and Driver.
Let me know if that works any better for you
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP 1300 Laserjet & HP 2605dn Laser Jet printers print density problem

I have both an HP 1300 b/w and HP 2605dn color laser printer. In the last week both printers have changed the output density. The 1300 print is coming out lighter than it used to, and the 2605 is not print the color tones as it used to. What used to be orange is now only yellow.Other colors are not right either. I can compare them to output a few weeks earlier, and they are much lighter and different color tones.
Both printers have plenty of toner in all cartridges. The toner cartridge on the 1300 was changed 2 weeks ago. The toner on the 2605 is 3/4 full.
This was like something got into the printer drivers and reset some parameters on both printers at once.
Can anyone help me here to check this out and how to correct the problem?

I have the same problem with my laser printer 2605dn. the color is pale, i replaced the cartridges with original hp's but it did not help. I also lost the capability of double side printing that I had when I originally loaded the printer drivers. I noticed this all after I checked the internet for software updates for my printer. Are there any solutions for these problems?
please let me know.

HP Laser Jet 1020 printing again the last job

Hello there!
I have a printer HPLaser Jet 1020 which, after reboot, of the computer when switching ON the printer, it immediately begins printing the last job that was sent to the printer before the computer had been switched OFF.
I have checked the printing queue before turning OFF the computer and it is empty.
This problem does not happen every reboot, but happens very often and I haven't been able to find the pattern, nor the cause. I've tried it in two different computers and the same problem occurrs. Has anybody else had the same problem?
By the way, I have Windows XP in both computers and the drivers have been downloaded from the HP web-site.
Thanks!

Hi, have you tried to disable bidirectional support'?
Devices/Printer > right click your HP printer icon > Printer Properties > Ports > uncheck 'enable bidirectional support > APPLY
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Laser Jet 4000 TN

Hello
I have searched this forum for a few hours to find a solution. A lot of answers refer to HP Jet. I have no idea what that is.
I connect using airport extreme and an ethernet cable.
I did reset everything on my printer still no success.
Anybody any ideas?
The printer is very heavy. I don't want to carry the printer, iMac and router to the store.
Does anybody know of a SL help line?
On second thought: Why did Apple mess this one up?
Thank you

I answered your post in the FAQ thread [here|http://discussions.apple.com/message.jspa?messageID=10327776#10327776] since you also posted the question there.
Just trying to help.
Andrew

Hp Laser Jet 4000 Printer

Similar Messages

Maybe you are looking for