HP Laser Jet 5000 Postscript PS Drivers not working

I have a Laser Jet 5000.  No major problems for a few years until my system recently got a virus and had to be wiped clean.  My PS printing no longer works.  It says it is installed, but when I go to use it to print I only get error messages and no printing.  I installed the PS driver from the original disk and also the generic PS driver from the HP website, but no luck.  
I need to be able to print using the PS printer so that I can control the lpi within my files and print color seps.  I can't seem to do this unless using the PS printer, which I can't get to work now. 
I need to solve this one soon, or I'm off to buy another more current printer with PS capabilities.

Hey @PatBarnes, 
Welcome to the HP Support Forum.  
I understand your new HP LaserJet Pro MFP M127fw is not picking paper and can appreciate how frustrating that must be.  I would like to assist you with this and have some suggestions that may help.  
I recommend you perform a 'hard reset':
1. Press the Power button to turn off the printer.
2. Disconnect the power cord from the rear of the printer.
3. Wait 60 seconds.
4. Reconnect the power cord to the rear of the printer.
5. Press the Power button to turn on the printer.
Next, click here to access your printer's user guide and clean the pickup rollers and separation pad in the document feeder as described in pages 101-102.  
I realize that these are repeat steps for you, but it won't hurt to try another cleaning as described.  If this comes up short and the feeder doesn't pick paper moving forward, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best of luck with this and thank you for posting in the HP Support Forum.  
Have a great weekend!  
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

  • My Laser Jet Pro CM1415fnw color - will not print ... WILL let me fax...

    My Laser Jet Pro CM1415fnw color  - will not print ... will let me fax... then it goes to a screen like it is thinking ....the screen shows HP.... enerystar.... and a white bar on the bottom ...then it "initializing"  and acts like it wants to print something. Help

    Does the printer ever come to "ready" or Home screen? If it does not then i would recommend calling support and they may be able to help you with restoring the device to factory settings. If this is constantly occuring every time you boot you may want to try upgrading the fw to the latest version. Also if it is just showing "Calibrating" very frequently in the Embedded WebServer (EWS), navigate to IP if you have it, in the "System" , "Print quality", you can can change the calibration timers and see if that helps.
    I am an HP Employee.

  • U330 Windows 7 Drivers Not Working

    Hello,
    I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
    u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
    Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
    Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
    So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
    I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
    thanks!
    Solved!
    Go to Solution.

    check out our thread here
    http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • HP Laser Jet 5000 not working well with 64 bit

    Hi,
    I'm having an issue with trying to get 64bit drivers loaded for my HP Laster Jet 5000. My enviroment is that the printer sits on a Windows Server 2003 box, but the people trying to connect to it are on 64bit Win 8.1. Trying to install the Univeral Printer Drvier from the HP site doesn't pick up the printer, even though it is already installed.
    Was just wondering if anyone could point me in the right direction for an actual 64 bit driver for this device, rather than the universal print driver exe. 

    Sorry that you are having a problem connecting the printer to a network. 
    Are you trying to connect wireless or ethernet?
    Have you had it connected this way before?
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • Laser Jet Pro CM1415fnw color will not print from eprint

    Laser Jet Pro CM1415fnw color printer will print from laptop but not from email. Signal on printer has strong internet connection and so does computer.  I tried to send a pic with my phone but it did not print.

     I will need a little more info in order to help out. If you send the printer an ePrint of a text document, will it print that plan document? Also, if the picture that you are sending is less than 100 DPI (dot per inch) the printer will not print that because of the quality. You can send the picture to the computer, open it and the right click on it and look under “properties” and it will give you the DPI information.  It is labeled vertical and horizontal resolution. Lastly, what type of phone do you have? What email client are you using to send the picture to the printer? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • HP drivers not working for Windows 8.1

    Hi, 
    I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
    Regards.

    Hi there @DuskHunter 
    Welcome to the HP Support Forums!
    I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
    HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
    If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
    How Do I Find My Model Number or Product Number?
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Network controller​, pci device, wifi drivers not working

    my device model is dv6-6121tx
    i am not able to install network controller and PCI device drivers...
    also my wifi is not working..
    no wireless adapter in device manager..
    please help...
    This question was solved.
    View Solution.

    Hello again samyak.  You are very welcome!
    The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router."  Unless you're using this PC as an Access Point this device is useless to you.  This article has more information on the service.  Your best bet is to just disable it.  Try the following.
    Click Start, go to "All Programs," and select "Accessories."
    Right click on "Command Prompt" and select "Run as Administrator."
    Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter.  This should disable the virtual adapter.
    Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
    The device with the "ACPI/HPQ0004" ID actually returned two results.  The first was the Quick Launch Button software.  The other was related to Hard Drive Protection.  Try this driver.
    Make sure to reboot after all of these instructions have been completed.  Then go back to Device Manager and verify whether everything looks as it should.
    Continue to have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • JDBC drivers not working in QA for multibye characters

    Hi,
    we have a problem with JDBC and deployed in DEV system and its works fine, but the same when we deply in QA its not working.
    the problem we are trying to use the simple select query from ORACLE DB.
    In ORACLE DB they converted the chenise char to English after that our JDBC drivers are not able to pick the multibite char.
    XI JDBC Adapter shows below error with a SELECT Query
    SELECT Query:SELECT * FROM APPS.ITEM_XI_V The Chinese character are converted to English and becomes multibye characters.
    Error:Error during conversion of query result to XML: java.sql.SQLException: Fail to convert between UTF8 and UCS2: failUTF8Conv
    Assumption is that the issue with older version of  ojdbc14.zip (JDBC Driver file)
    Reference:http://www.coderanch.com/t/299231/JDBC/java/UTF-conversion
    implement SAP Note 941317 in order to resolve the current issue.
    Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities JDBC Driver Deployment. Refer to  SAP Note 831162
    after apply as per note for DEV system its works fine, but the same when we did for our QA system still the same error.
    Thanks,
    Venkat.

    Hi Gurus,
    Any idea where i am doing wrong.. in QA i am able to extract data with simple select statment with normal tables...
    Thanks,
    Venkat

  • Sound & Graphics Drivers not working for Qosmio F15R

    I was granted this Laptop with nothing more than AC Adapter. I didn't need the information contained in it and didn't want to deal with its configuration issues either, so I started planning formatting it. Looking for model number label at the bottom found it says "Qosmio F15R". I couldn't found this model number at support website for drivers, closest model was F-15AV201, figured it out by watching its pictures in detailed specs documentation. Everything but Bluetooth seemed to be available, so I formatted and reinstalled Windows XP Pro SP3 and then downloaded all drivers. Touchpad, Ethernet, Wireless, Flash memory, TV-FM and DVD-RAM worked just fine. On the other hand Sound, Display and Modem didn't work at all.
    While installing Sound driver I got this error message:
    http://img21.imageshack.us/img21/5075/sounddriver.png
    (it says: "couldn't find driver, reboot and reinstall")
    After installing Display driver checked display adapter properties and found this:
    http://img402.imageshack.us/img402/5171/vga.png
    (no information available and even scrolling on web browser is crappy)
    After installing Modem driver realized it was not identified:
    http://img237.imageshack.us/img237/4613/devicemanager.png
    (Sound, Display, unknown device, Modem)
    I thought I was using drivers for wrong model, so I downloaded PC Wizard, a freeware that identifies hardware configuration:
    http://img262.imageshack.us/img262/6452/pcwizard.png
    wich gave me chipset, processor, video card and-
    http://img175.imageshack.us/img175/4121/soundr.png
    -sound card: 82801FB ICH6 AC'97.
    I couldn't find any proper driver nor for sound nor display, so I tried a shareware, Everest:
    http://img337.imageshack.us/img337/6199/everesth.png
    wich showed me the same chipset, video card and sound card model numbers than PC Wizard.
    I realized that chipset, and display model didn't match detailed specs documentation. I thought that hardware was not working properly, so I downloaded and installed a Linux distro (Kubuntu 9.10 RC i386), and fount out that display and sound were working just fine but I need it to work properly with Windows XP.
    Can anyone tell me where can I get sound and display drivers (and even Bluetooth if possible) for this laptop? Thanks in advance. Regards.

    I have the same problem with audio driver. I can send you the graphic driver that works with Qosmio F15R if you need. My email: [email protected] Toshiba is so bad in supporting with their products.

  • 2011 MBP with Win7 on BC and numerous drivers not working

    I'm working on a tech project and have run into a problem that i can't fix. <grr> I followed the Apple directions for installing a second OS on Boot Camp and found some good tips from other online walk throughs, but am still having a problem with a number of the drivers.
    I have a 2011 MacBook Pro 13" with the most up to date version of Snow Leopard. I have installed Boot Camp and Windows 7 Pro on a 50 Gb partition. I have installed Windows 7 and activated it. Once Win7 was up and running I updated the Boot Camp drivers with 3.2.0, the latest version that I know about. Initially I had no recognition of either the wired or wireless controllers even after the Boot Camp 3.2. I was able to determine that I had a Broadcom wired ethernet card and found the driver and installed it via USB so that I could use Win7 to access the internet.
    The drivers that, as found from the Device Manager, are not working are as follows:
    Network Controller - Wireless
    PCI Simple Communication Controller
    SM Bus Controller
    High Definition Audio
    Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
    Facetime HD Camera (1 of 2 not working)
    I have been able to use the wired internet to download and install all of the available Win7 updates, but nothing can be found on the above drivers. I even manually installed the drivers for each of these components from the Snow Leopard disk for Boot Camp and they would not install.
    From all the information that I can find on the Win7 Boot Camp install, nothing more recent than early 2010, everyone seems to have everything just install and work. I have not seen anything from anyone about the wireless and wired network cards not working or any of the other issues that I'm having. The majority of the issues were with the optical audio LED staying on or some other more trivial issue.
    Anything you can suggest would be great so that I can use the internet in Win7. The rest of the drivers are second to getting on wireless.
    Thanks in advance for your help. If you have any more detailed questions please let me know and I'll get answers back.

    I have a 15" MacBook Pro, built July 2011. It came automatically with Lion. No OS X disc provided in box with Lion, due to it being a download only OS.
    I followed the boot camp process to partition the hard drive and format the appropriate partition, to then install Windows 7 Pro Upgrade (clean install - works fine). Just like the original post, the following drivers that will not install properly include:
    - trackpad
    - keyboard
    Even when trying to re-install the drivers again manually off the boot camp disc, a window pops up to stating that the drivers may not have installed properly and gives you the options to either re-install the drivers 'using the compatability settings', or 'no the drivers installed ok'.
    It's almost like it thinks Windows 7 is an old program....weird.
    The keyboard and trackpad is missing from the Boot Camp control panel, so I can't change the settings for the keyboard and trackpad, to get them functioning the way they're meant to - like it does in Mac OS X.
    I thought that this page would help: http://www.reviewmylife.co.uk/blog/2010/06/08/windows-7-on-macbook-pro/ but no it didn't. The boot camp control panel screen dumps shown in this link, looks nothing like mine, due to the fact that the drivers refuse to install properly.
    I have spent hours trawling many mac and windows forums with not luck.
    Anyone with a MBP running Lion OS and Windows 7 Pro have these issues?
    Does anyone have a solution?

  • Realtek AC97 Audio Drivers Not Working!

    Hi.
    I recently had a HD crash and I was forced to format it. I installed everything just as the first time, and everything worked fine except the audio drivers. The problem is, it does actually install the drivers, but when I look at Sound Options or Device Manager there are no drivers for the soundcard. It says installation is complete and then I restart the computer, and when I try to update with MSI Live Monitor 3, it says I got the latest drivers installed. STILL doesnt work.
    Does anyone have a hint about the problem? Any virus? On another note Norton discovered viruses on my computer, even though I had installed the antivirus-software before connecting to internet\network. This is what it found:
    W32.Randex.gen - msconfg.exe
    W32.Spybot.Worm - vsmon.exe
    And some adware.
    In virus description it says the viruses can come with programs but I have only installed a few programs, and it says it will spread through IRC. I have 2 other computers in my network, but I dont know if they have anything to do about it. The program will not work correctly whitch is infected with this virus, so maybe there is a chance Live Monitor got it and somehow cant get the sound working... probably not, but this is all i can give.
    Tried to reformat another time but still same problem... motherboard broken??

    Quote
    motherboard broken??
    Possibly. One way to try is see if it works fine with different os'es. If you can download knoppix's latest version (which I hope supports the onboard audio, like my new fedora linux does) and try it, then you can find out if the sound works or not.
    Knoppix is a kind of special linux that you don't have to install, it just runs off of a cd.
    On another note, I find that if I run live update, or open live monitor and search for new drivers, my sound is cut off whether I update or not till the next reboot.

  • Presario R4000 Laptop Audio Drivers not working

    So, I've got this older Laptop, the Compaq Presario R4000.
    It was giving me a really hard time with software with the original OS and stuff, so I decided to format it and install my own Windows XP Professional on it, as opposed to the Compaq-ware filled XP Home that was already on it.
    So I formatted, installed Windows, and found the driver page for it.
    I Flashed the BIOS despite the fact that I don't think it was necessary, but I wasn't sure.
    I installed the graphics drivers no problem.
    Installed the wireless device drivers, though not sure if these are working, but it's not significant.
    What is significant however, is that the Audio Drivers provided on the site do not work at all. I looked for other drivers, looked for other driver versions for the OSs and various other Presario models, but nothing has worked.
    I don't know what the problem is. I'm really hoping someone is able to help!
    Thanks in advance.
    Error Message:
    BTW, I should mention what the error message I'm getting is.
    A command window pops up running the following command:
    c:\swsetup\SP29873>start /min \swsetup\audio\setup.exe /s
    I tried fiddling with the batch file that was running these commands to see if that would help, but it doesn't.
    Still always get the same error message:
    "Windows cannot find '\swsetup\audio\setup.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."

    I have the same error message, have you figured it out yet? If yes, please tell me what you did <text deleted> Thanks
    Message Edited by WendyM on 09-07-2009 08:48 AM

  • Microsoft Jet OLEDB 4.0 STILL not working on 64-Bit?

    I've seen all the posts (hundreds of them) concerning the fact that the Microsoft Jet OLEDB 4.0 provider only works on 32-Bit systems.  Really?  I'm running Windows Server 2008 Data Center and have an urgent need to run an SQL Job that needs to query an Access database.  The job runs DTExec to execute an SSIS package (the Job step is configured with the "Use 32 bit runtime" checked (set to true)).  I am getting the follwing error message when I'm on the part of the SSIS package, which is an 'Execute SQL Task', which attempts to open the Access Database: 
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  2:31:08 PM
    Finished: 2:31:12 PM
    Elapsed:  4.438 seconds
    Microsoft (R) SQL Server Execute Package Utility
    Version 10.0.1787.0 for 32-bit
    Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
    Started:  2:37:14 PM
    Error: 2009-04-30 14:37:19.13
       Code: 0xC002F210
       Source: DoDeletes Execute SQL Task
       Description: Executing the query "DELETE From [dbo].[zsong] where [MUZENBR] in (
    SE..." failed with the following error: "The OLE DB provider "Microsoft.Jet.OLEDB.4.0" has not been registered.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
    End Error
    DTExec: The package execution returned DTSER_FAILURE (1).
    Started:  2:37:14 PM
    Finished: 2:37:19 PM
    Elapsed:  4.422 seconds
    I find it highly ridiculous that Microsoft would not care to release a 64-bit driver for Jet OleDb 4.0.  There is obviously a need, judging by the hundreds of posts out there with people asking about this.
    Or am I missing something?  Is there a driver that I just can't find?
    Thanks.

    The Jet OLEDB provider consists of several dlls. You can check if these dlls are installed.
    For x64 machines, the 32-bit folder where I expect they live is C:\Windows\Syswow64 or C:\Winnt\Syswow64
    This list (taken from http://support.microsoft.com/kb/278604) seems to cover the Jet dlls:
    Microsoft Jet 4.0 OLE DB Provider
    Provider=Microsoft.Jet.OLEDB.4.0
    C:\WINNT\System32\Msjetoledb40.dll
    C:\WINNT\System32\Msjet40.dll
    C:\WINNT\System32\Mswstr10.dll
    C:\WINNT\System32\Msjter40.dll
    C:\WINNT\System32\Msjint40.dll
    This article tells how to see if Jet is installed, and which version is installed, and how to get the latest service pack 8 http://support.microsoft.com/kb/239114/
    However, that kb 239114 it says "For computers that are running Windows Server 2008"
    If you are running Windows Server 2008, you have a later version of Jet 4.0 than the version that is included with Jet 4.0 SP8.
    If you don't find Jet is installed correctly, I am not totally sure what to do - sounds like Windows is not installed completely, or the feature was not enabled in the add/remove windows components.
    Indeed Jet is only 32-bit as Todd mentioned http://support.microsoft.com/kb/957570
    Since Jet is included with the OS I expect the install to have been done by one of the *.inf files in the C:\Windows\inf. I found several inf files on my Win 7 machine (not a good comparison for you) which cover these dlls such as (syssetup.inf, layout.inf, oem33.inf). I know it is possible to right click and run the install on these .inf files, but since its a windows component, it would be reinstalling windows components too, which I would recommend against on a production server, escpecially a datacenter edition! Must be a high end production server, so I can't recommend you do that because I'm afraid it would break something else because I haven't tested it before.
    Let us know if you find the dlls or not.
    Best wishes, JasonHDidn't get enough help here? Submit a case with the Microsoft Customer Support team for deeper investigation - http://support.microsoft.com/select/default.aspx?target=assistance

  • Satellite L755D-S257​9 AMD Drivers Not Working on Fresh Windows 7 Install

    Hi,
    The HDD died in my L755D-S2579 yesterday. I was able to install Windows 7 on a new HDD but cannot get the AMD drivers to work correctly. I've downloaded the latest drivers from the support page and it seems to go through the install but the Display menu continues to use the Generic Standard VGA Graphics Adapter instead of the AMD drivers. When I try to open AMD Vision Engine Control Center it says that there are no settings that can be changed at this time. I've tried uninstalling the generic drivers and uninstalling and reinstalling the AMD drivers but nothing is working. What can I do to get this to work? I can't continue using this laptop if it's running at 1024x768.

    Satellite L755D-S2579
    What is the part number of your computer? It looks something like PSK32U-03P00X.
    -Jerry

Maybe you are looking for