HP Laser jet 5550 offline and wont respond! Help!

It would be appropriate to supply us more details, and maybe tell us what you've tried to do so far.1 - You have removed both the electrical connections as well as those to the network and the computer? He has solved, at least in part?2 - Have you taken steps to verify when the last maintenance was performed, or at least a thorough cleaning?2 - How long does the printer, and how many prints have performed so far?3 - You have to hand its specific manual? It seems to me the ver. Q3713-90965 since 2005.EDIT: A thumb, I would say a problem of lack of adequate power supply, or the presence of false contacts due to accumulation of dust. I recommend a thorough cleaning, trying to use a HEPA vacuum, or not downwind.

We have a HP 5550 laser jet printer which is appearing offline, the 2 green lights and the amber light are all on. And the LED screen is on but with nothing appearing on there, just the back light. Any help would be greatly appreciated?
This topic first appeared in the Spiceworks Community

Similar Messages

  • I was using my iphone less then 5 min earlyer full charge in it and its in a protective case.  I put it in my pocket and when i took it out it seems the iphone is dead and wont respond to anything!

    I was using my iphone less then 5 min earlyer full charge in it and its in a protective case.  I put it in my pocket and when i took it out it seems the iphone is dead and wont respond to anything!

    Home button + power button for 15sec - 1min until you see apple Logo.
    Release buttons, breathe a sigh of relief.

  • My phone is frozen and wont respond to holding the sleep/wake button and the home button how do i unfreeze it?

    my phone is frozen and wont respond to holding the sleep/wake button and the home button how do i unfreeze it?

    See Here for
    Frozen or unresponsive iPhone
    Try this First...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    http://support.apple.com/kb/ht1430

  • I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

    I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

    Hi Aloolaab,
    I understand that you're trying to enable web services on your printer.  I would try the steps below.
    1. Open an internet browser type printer's IP address.
    2. Should bring you to the printer's status page.
    3. Select networking tab at the top.
    4. Left hand side select Network Identification.
    5. Under DNS address Configuration select Manual DNS Server.
    6. For Preferred enter 8.8.8.8
    7. For Alternate enter 8.8.4.4
    8. Select apply. You might get a warning saying this could interrupt connection that's fine.
    9. Turn printer off for about 30 seconds then try again.

  • My iphone went completly black and wont respond to anything

    My Iphone is not working at all its completely black and wont respond to anything if you know the soultion to this problem  please let me know thank you

    Hi mikemikenation,
    Welcome to Apple Support Communities.
    The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 5s.
    Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
    If you see a solid color screen (black, white or blue)
    Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
    Reset your device while it's plugged in.
    If resetting doesn’t fix the issue, restore your device.
    If you still see the issue after you restore, contact Apple Support.
    Take care,
    -Jason

  • My ipod only shows apple on front and wont respond to any buttons.

    My ipod only shows a spinning wheel and a apple and wont respond to any of the buttons to see what may be on it,it was a gift..

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Side scrollbar doesnt work and wont respond when i drag it

    side scrollbar doesnt work and wont respond when i drag it

    Hello,
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    #Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
    #* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
    #* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    #In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
    #In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    #Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Also check to make sure that the mouse/trackpad driver is up to date.
    Thank you.

  • Hi i have a white screen after replacing the screen i have tried the reset, but it just goes to a black screen and wont respond, i cant do it on itunes because theres a passcode on it.. help please

    Hi
    I have a white screen on my ipod after replacing it, i have tried the reset but it just goes black and wont respond, i cant restore it on itunes because it has a passcode on it, please help

    Place the iPod in recovery mode using one of these programs and then restore va iTunes:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    A supect a hardware problem

  • My sons ipod locked up and now has a solid white screen and wont respond to anything

    My sons ipod was working fine then the screen locked up wouldn't allow any use tried to turn it off now it has a solid white screen and wont respond to anything.  Any ideas what i can do

    Let the battery drain.

  • I have a new 32gb ipod 4 that has a black screen and wont respond to reset.  The screen shows no response to the charger either.  How can I get it to turn on?

    I have a new 32 gb ipod 4 that has a blcak screen.  It wont respond to a hard reset, nor does it acknowledge that it is being charged.  It was not dropped or damaged in any way. We are out of the country.  Help

    First, let's make sure that what you call a "hard reset" is a true system Reset...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • My ipod froze and wont respond.

    i was playing the app "temple run" and the ipod touch (3rd gen) just froze and it wont respond at all. iv'e tried restarting and everything. and no response. i also plugged into itunes and it come up with a message saying  there was an invalid response received from the device.
    can anyone please help???

    Try this discussion...
    https://discussions.apple.com/message/18697908#18697908

  • What to do if your iphone 3GS freezes on the apple logo and wont respond when you try to reboot it?

    My iPhone 3GS keeps freezing as soon as i turn it on. I hold the home button and the power button to reboot it and it just wont respond to anything. It just stays froze on the apple logo with the black background and nothing else.

    Hi hollie13,
    I'm sorry to hear you are having issues with your iPhone not responding.
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots.
    Always back up your device before troubleshooting:
    iOS: How to back up and restore your content
    I've quoted some helpful highlights for you:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Resolution
    Follow the appropriate steps for the symptom you're experiencing.
    If the device is unresponsive or certain controls aren't working as expected, try restarting
    To turn off the device, press and hold the Sleep/Wake button until the red slider appears.
    Slide your finger across the slider to turn off the device.
    To turn on the device, press and hold the Sleep/Wake button until the Apple logo appears.
    If the device remains unresponsive or does not turn on (or power on), try resetting Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.  If there is no video, verify that the device has enough charge to turn on
    Ensure the iPhone is connected to the Power Adapter it came with.
    Let charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Home button to attempt to wake the device.
    If the screen displays a red battery icon, let the device to continue to charge until it turns on.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode.
    I hope this information helps ....
    Have a great day!
    - Judy

  • When i try to go into itunes it frezes up and wont respond! I can see my music library no cant select anything and when i conect my iphone it doesnt recongnize it.... any ideas on a fix?

    my itunes isnt responding... all i get is the library page... cant do anything on the page, it wont recongnize my iphone neither, any suggestions how to fix?

    First off try and go into your IPhone manually through My Computer and cut photos or anything you can through the device to be able to free space up so that you can continue to do what you want to do with ITunes. This way you will be able to create a backup or do what you have to do to manage your information, photos and texts on your device a little better.

  • 6th Gen nano has thin white line around the icons and wont respond to touch

    Hi
    I sent away my 1st Gen nano and got sent one of the 6th Gen ones. When recieved there are thin white lines around the  icons and the screen doesnt not respond to touch. I have reset and reset and nothing has worked

    Sounds like VoiceOver has been enabled.  See this article for instructions on turning it off.
    iPod nano (6th generation): How to use VoiceOver
    B-rock

  • My phone is completly dead and wont respond...

    My Iphone went dead and now wont even acknowledge being plugged in or wont charge at all. The only thing happens is it shows a black screen with a plug and a lightening bolt. Does anyone know if there is something i can do?

    If it won't charge from a known good charger and usb plug there isn't anything you can do, other than perhaps gently brusing the dock connector at the bottom of the phone with a clean dry toothbrush in order to clean it.  Make an appointment with the Genius bar at a nearby Apple store to have it looked at.

Maybe you are looking for