Hp laser jet p 1102 w , downloaded driver does not finish the installation

hp laser jet p 1102 w. Problem with installing new printer.
The downloaded driver, and the one included with the new printer does not finish the job of installing the software.

Hi @allanR ,
I can help you with setting up the printer, but I will need to know some more information.
How would you like to setup the printer, through a USB connection or Wireless?
What operating system are you using? (Windows 7, Mac 10.10)
Please be specific, the steps can be different, depending on what you are using.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
Print a configuration page to get the printer's IPv4 address if networked and also to test the printer's functionality.
Printing a Configuration Page. Were you able to print the test page, do you have a IPv4 address? (what are the first 3 sets of numbers)
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

When downloading, it does not finish the download. Firefox stops and closes all open tabs/windows

no special webside or file

Is that Firefox safe mode or Windows safe mode?
If it does work in Firefox Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe Mode|Safe Mode]] start window to disable all extensions.
*Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

The source drive does not contain the HP Recovery Image

I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
pher
This question was solved.
View Solution.

Hi,
Check the below link:
Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
Quote from this document:
"Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

HP Color Laser Jet CP2025dn Windows 7 driver does not support the built in duplexing hardware

Windows Printer Driver Version 5.0.3 does not support the printers built in duplexing hardware. This is true of the PCL5 driver, the PCL6 driver and the Post Script driver.
It does support manual duplexing (stand there and feed the printer after the first side prints).

Windows Printer Driver Version 5.0.3 does not support the printers built in duplexing hardware. This is true of the PCL5 driver, the PCL6 driver and the Post Script driver.
It does support manual duplexing (stand there and feed the printer after the first side prints).

Hard drive "does not meet the requirements" for system updates

Hi,
I'm running 10.2 and I'm trying to update my computer to the more recent version, except that I've gone through the update downloads on this site and anything higher than 10.3 tell me I need to run 10.3 to run it. When I tried to upgrade to 10.3, I was told that I "cannot install this software on this disk. This volume does not meet the requirements for this update". What does that mean and how do I rectify the problem? Thank you very much in advance.
- Jen

Hi Kappy! I have a similar problem: I had a problem in the past and had to re-install the system. I now have a previous sytem folder on my mac which I do not dare touch. I used to have a later version than 10.3.3 (I cannot remember which). I am now trying to update with the 10.3.9 combo update (just bought a new ipod) and I get the famous "does not meet the requirements" message. I have repaired permissions and done Onyx maintenance - still nothing. I wonder whether somehow the installer detects that there is already some newer component installed and does not want to re-install. I am awfully frustrated... Thanks in advance for your help.

I have a problem with Downloads, firefox does not recongise the .doc format despite me having word 2007 loaded only a problem since a new laptop, and windows 7 professional, any ideas?

When Trying to download a word file I get this error message: " *.doc could not be opened, becasue the associated helper application does not exist change the association in your prefernces. " Have checked preferences, and IE opens up the file pointing to something wrong with firefox.

I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

Laser jet pro200 color mfp m276nw Scaner can not see the network path for the scan-to-folder

I am setting up my scaner...
with the scan-to-e-mail- no prob, but to scan to the folde (computer) the software said i have incorrect network path.
It is must be somekind bug in the system. Cause I just copy the path from the direct address in my copm!
I have attached the files regarding my fails-maybe someone is smarter then me and able to explaine what am I doing wrong?
Many thanks to everyone in advance...

Hi @olenasukhina,
I see that you are having issues setting up the Scan to a Network Folder. I can help you with this.
I have provided a document for setting up the Scan to a Network Folder.
How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
Here is a post from @skile88, which resolved this issue. Re: HP LASERJET PRO 200 MFP M276NW - Can't scan to Network Folder.
If the issue persists, then I would recommend to call HP Tech Support, since they have access to remote into your computer to find out more of what is going on. Call 800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region. Contact HP Worldwide.
Let me know how you make out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

DVD drive does not burn the DVD but prompts the mysterious 0x8002006D error

I read the earlier threads about the mysterious 0x8002006D error.
Then went to look at the console and the DiskRecording log reads:
Finder: Burn sense: 3/73/03 Medium Error, Power calibration area error
Finder: Burn error: 0x8002006D The device failed to calibrate the laser power level for this media.
Can anyone tell what this could mean? Is the drive old and tired? I have the latest possible update for this Powerbook G4 1,25 GHz that I can use. What is meant by the latest firmware - where can I check which is the latest firmware for this particular DVD/CD superdrive ...
I am not trying to use the impossible, the G4 only supports DVD-R and with the speed up to 2x, so it is getting difficult to find suitable DVDs for this. The better MacBook is being serviced, as it has a screen problem, only after 1 year of use!
Please, can anyone help me, my works do not make any progres and I am in trouble!
I would be grateful for

Actually, I found out that for this particular PowerBook model there is no further firmware upgrade for the SuperDrive, only for the models starting from 1.5 GHz. Obviously all I can do is downgrade my OS to the version, which I suspect was the one that still supported my SuperDrive to see, whether it is the Drive that has died or whether it is the conflict with the upgrades and the hardware.

Life drive does not reconize the location of the stylis how do i fix this

the stylis location is not reconized by the divice. i have done a compleate reset after hot sinking the device it does not reconize the location of the stylis it goes through the touch the astrick over and over again it does not sink up to the screen
Post relates to: LifeDrive

First thing to check is for a "screen wedgie".
Fold a piece of paper into a "scoop" and run it around the inside perimeter of where the frame meets the screen. You're trying to find some grit or dirt built up underneath that is causing a "Phantom Screen Press".
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

Cannot install windows 7 as cd drive does not reganise disc

Hi
Trying to install windows 7 on bootcamp but cd drive does not reganise the disc & keeps rejetting, please help
Nudge1

Hi
The CD/DVD driver is part of the Microsoft system and also available on the Windows 7 installation disk.
Therefore there are no special CD/DVD drivers available.
I read about this theme in different forums and also on Microsoft support forum and mostly this issue appear if the Windows system disk is faulty/damage.
I dont know from where you got this disk but I recommend you to download an Windows iso file from Microsoft server as mentioned here:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=73726
Then you could create own Windows installation disk or USB flash memory stick
The serial key which you got with the Windows disk could be used for activation.

The Downloaded PDF file does not contain the Signature through BSP pages

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

HI,
We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
To satisfy the above requirement we have done the following steps.
1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person.
We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
2) WE also Modifed the Dirver program to Download the above document in a .PDF file.
The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
4) We wrote a BSP program to download this ulploaded PDF Files.
BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
All other data in the dowloaded PDF file is Perfect other than the Signature.
When we open the downlaoded PDF file it give's following message on the Signautre page.
" Xobject not found named 00013"
The number of the Object comes different to different files.
We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
Please suggest some solution if you can
Thanks in advnace.
Re
GAGAN

Satellite A210-131 sound driver does not support DirectSound input

Starting Premiere Pro CS3 , an error message appears:
- "Der zurzeit installierte Soundkartentreiber unterstuetzt keine DirectSound-Eingaenge" Es ist keine Audioaufnahme moeglich".
- "The installed sound card driver does not support the DirectSound input. The Sound recording is not possible"
Please help me to find a working driver. Operating system is Windows Visat Ulimate.
Thank you
Siegwin

Hi
In my personal knowledge the DirectSound is an addition to Microsoft's DirectX system. It should be included in the DirectX.
Please check if you have installed the newest version of DirectX 9C.
Furthermore I would recommend updating the sound driver. On the Toshiba page you could find the latest two versions of Realtek sound dirver;
- 6.0.1.5374
- 6.0.1.5406
If both will not support the DirectSound input try another one from the Realtek homepage.
The chip is called Realtek ALC268

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

Hp laser jet p 1102 w , downloaded driver does not finish the installati​on

Similar Messages

Maybe you are looking for

Hp laser jet p 1102 w , downloaded driver does not finish the installation