HP Laser Jet P2035N is terrible with Windopws 7 64 bit

First off, a Windows XP system on the same network has no isssues printing at all.
If I print something simple from my Windows 7 64bit system it prints over and over until I turn off the printer or kill the job in the print queue.  I can fix this my enabling LPR byte counting.   
BUT
If I try to print something bigger like a PDF it spits out a blank page then the yellow light next to the '!' in a triangle starts blinking.  If I click the load paper button it will then print the the one page PDF.
I have downloaded the latest software.  I even updated the printers firmware via USB.  I even uninstalled the printer and reinstalled using the original CDs from the time of purchase.  Nothing has fixed it.
The more I search the more this seems to be a wide spread problem.  This is completely unacceptable and shows that HP does not care about supporting it's customers.

Hi SWiT,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

  • How do I use my HP Laser Jet 4M  printer work with my OS 10.9 MacBook Pro

    A "newbie" here.  I am having trouble getting my new Macbook Pro and its 10.9 OS to accept my HP Laser Jet 4M+ printer.  HP apparently does not support the Mac's OS10.9. Any help appreciated.

    Ok, I've downloaded the drivers as suggested.but still not printing as it should.
    It's now printing one page as opposed to many, but it still has the jargon on top of the page as depicted in my original post?
    From this info you advised, it does suggest, does it not, that the HP Laser Jet 6p is supported.
    Meanwhile, any other advice.
    Regards

  • What 1018 laser jet drivers are compatible w/mountain lion 10.8.4?

    What HP 1018 laser jet drivers are compatable with OS X Mountain Lion (10.8.4)?

    HP has not developed Mac drivers for the LaserJet 1018. People in the HP forums have reported that the LaserJet 1022 drivers work, though.
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Lase rJet-1018-driver-for-Mac-OS-X-10-8-2/td-p/2294795
    Regards.

  • Laser Jet 4000 Parallel Port to USB

    I have a Laser Jet 4000 that I've tried to connect to my new computer using a parallel to USB cable.  Now when I shut down Windows XP I get a Blue Screen and the computer does not shut down automatically.  Sometimes I get a message that there is a driver/device conflict.  When I disconnect the USB cable to the printer, the problem disappears.  What can I due to get the Laser Jet 4000 to work with Windows XP properly?

    You could purchase and install an IEEE 1284 card on your PC, which will have a parallel port on it. This way, you can connect the printer directly to the PC. You could also install the latest drivers for the Parallel-to-USB converter and see if it helps.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • HP Laser Jet 6P does not work with Windows 7 Pro 64 bit

    HELP!!
    I have a HP Laser Jet 6p with the standard Centronics Parallel Port on the printer.. i bought a new computer and it does NOT have the Parallel IO port on the motherboard.. i am using Windows 7 Pro edition 64 bit..
    I purchased a centronics to usb cable from Cables Unlimited.. this cable does NOT support Win 7 64 bit... i spoke to the Tech support there....
    The printer is 11 yrs old.. but works like the day it came out of the box..
    Can someone please Help .. i am in dire straights..
    Ty
    Henfischer
    <text removed for privacy>

    Hi,
    I have to buy a new computer and I was worned about this happening.  Did you ever get it resolved or do I have to downgrade to XP to keep my printer?
    Thank you for your help
    CMLN.

  • Printing issue with a HP Laser Jet 1012

    I am unable to print to my laser jet from any application. If I restart the printer, I can print once, but then I am unable to print anything else unless I restart again.
    When the QUE dialogue box appears, it says "Printing ‘Microsoft Word - Reserved.doc’. Below that it says "Opening printer connection". In the que box below (blue/white striped box) the status says printing, but nothing is printing. Eventually it will say stopped and where it used to say "Printing ‘Microsoft Word - Reserved.doc’. it will just say "Printer Ready".
    When I click on the printer utility, my printer is not listed. And when I try to add it, the computer can not find it. Not sure if that is part of the problem.
    Thanks!

    Hi
    I have a bit of the same problem. Many times the printer will print, but the output is gibberish to me. The older driver under Tiger gave me better choices to save toner. On ECONO I was able to get more than double the output of as stated in the guidelines from HP [2500 copies] I got +- 7,000.
    They shouldn't have messed with a good thing, the drivers, as they worked great before.
    The printer was not recognized automatically, and I have to reinstall Leopard [clean install each time] for a third time.
    This will probably be my last upgrade.
    Best, to all!

  • Scanning with an HP 3390 all-in one laser jet printer using Windows 7 pro (64 bit)

    I have recently acquired a Dell Windows 7 Pro (64 bit) OS computer and was wanting to use my HP all-in-one laser jet 3390 printer and scanner. The printer software which came with my HP 3390 will work with my Wind 7 Pro OS computer, however my HP 3390 scanner function will not work using this HP driver software, with my Win 7 Pro OS.  I am trying to locate the appropriate HP scanner and/or different printer drivers that will support both the printer AND scanner functions of my HP 3390 printer/scanner, while using my Windows 7 Pro OS computer.  Within the HP website, I have not been able to find this type of driver software or support, as least listed as such?  I was wondering, if there are maybe no dedicated or described scanner drivers for my situation, is there even another set of drivers which might be intended for other Window 7 Pro OS based computers and other HP printer/scanners, which would work for my situation as well?  Does anyone have a solution to resolve this issue via HP driver software or by another method...maybe even 3rd party?  Ther has to be a solution?

    @ccan 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • I can not install my wireless P2015 dn Laser Jet Printer with the MS 7 software.

    For three years the P2015 worked "wireless"on my Lenovo T60p with microsoft XP.  It ran through my wireless router and printed fine. 
    I just updates the software to MS 7 (32 bits, 2007) and the printer will not run off the router.  I hooked the printer up directly by cord, downloaded the printer drivers off the MS 7 software and it worked fine while attached.  The router works fine with MS 7 for the internet and the email on my computer and the two other computers (still MS XP) on the router.
    I tried installing the 2015nd Laser Jet using the CD driver it came with originally and I come to a screen "searching for available printers" and there is nothing in the box below to choose from (blank screen).  It goes though a "searching for available printers" routine and finally the message come up "No printers were found".  This same thing occurs when I try downloading from the HP Web site drivers.  I get the same screens and the same results. 
    What do I need to do?  (I am a beginning level of computer knowledge)
    This question was solved.
    View Solution.

    Hi Edronenburg,
    Even though the software installer can not find your printer automatically, you can still install the printer if you know the IP address.
    If you press and hold the "Go" button on the control panel for several seconds (until the lights begin flashing) the config page will print. On this page you can find the IP address of the printer that has been assigned by the router. During the software install, instead of having the installer automatically search for the printer, choose to manually enter the IP address. This should allow the software install to complete successfully.
    (Although I am an HP employee, I am speaking for myself and not for HP.)

  • Hp laser jet 1022 won't print with my new hp envy 8.1 operating system

    My new hp envy 8.1 operating system won't print from my hp laser jet 1022 printer. I have downloaded the driver and it seems like it's not acknowledging the USB cord.

    When you say " my new hp envy 8.1 operating system " ..... Does that mean possibly that you had windows 8 ,,, and have upgraded to windows 8.1 ?   Or does that just mean you have a new computer and it Came with 8.1  ???
    What is the Model of your computer?
    The reason i asked.. because I searched for your HP Laser Jet 1022 Drivers, and when i found them, i selected "more details" and it states   " This full software solution is the same solution as the in-box CD that came with your printer. This is not a software upgrade. If a prior version software is currently installed, it must be uninstalled before installing this version. "
    Sooooo.. if you had windows 8, and then upgraded to windows 8.1, then you probably need to 'uninstall' any reference to the original installed software for the laser jet 1022.....
    And you could also try to NOT get the Full software / driver option, and get the 'Basic drivers' ( you will notice a link for that under the download of the 'Full' software link....

  • I have a Laser Jet 4 plus C2037A and purchased a new computer with Windows 8.

    I have a HP Laser Jet 4 plus   C2037A.  Bought a new notebook with Windows 8.  Had Windows XP.  I do not seem to be able to load it and have not found a driver yet.  Anyone else having this problem?

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at Printers - LaserJet.
    Click on New Post.
    I hope this helps.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Is hp colour laser jet cm1312 nfi mfp compatible with eprinting

    hi can anyone tell me if the hp colour laser jet cm1312nfi mfp is comtatible with eprinting and if so how do I go about setting up
    Thanks

    Hi,
    The cm1312 MFP is not compatible with the ePrint Service.
    The only compatible Commercial Laserjet products are CM4540, CP5520 and M4555 as you may find listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&tmp_task=useCategory&cc=us&dlc=en&lang...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I cannot print with HP Laser Jet Profession​al P 1102w

    I was using Windows XP on the first hard disk of my computer. I could use your Laser Jet with this Operation System. But the difficulties with Windows XP are growing and I want to Install a newer Windows Operating System ???- On the second hard disk of my computer I am using Linux Ubuntu. I tried in vain to use your printer with the Linux Ubuntu system. Therefore I want to use your printer by sending the data to be printed as attachment of an E-Mail with ePrint . 
    But by now I get:
    SERVER ERROR
    Oops! Something just went wrong with our server.
    Try refreshing the page. ???

    Hello there @Frielinghaus !
    Thank you for posting on the HP Forums!
    I can see you experiencing some server issues when trying to setup the ePrint feature on your LaserJet P1102w printer.  I should be able to provide some help with that!
    The first thing to check when troubleshooting any LaserJet printer is to confirm it is plugged into the wall directly and not a power surge protector.  The next thing to check is to ensure the printer has the most up to date firmware version.  I can provide a link to the download for the Laserjet P1102w firmware update for Windows XP.  When running a firmware update on the printer it must be plugged in temporarily with the USB cable.
    For the firmware update click here: Firmware update for HP Laserjet P1102w.
    If you are still experiencing the server connection issue when trying to enable ePrint then you may be able to change the DNS server the printer is using!
    To change the DNS:
    1. Access the printers Embedded Web Server (EWS) by typing its IP address in the address bar of the web browser.
    2. Once connected to the EWS click the Network Tab at the top of the window.
    3. Click "IPV4 configuration" on the left side.
    4. Click Manual IP.
    5. Under DNS address configuration enter the New DNS server.
    6. For preferred DNS address enter "8.8.8.8".
    7. For Alternate DNS address enter "8.8.4.4".
    8. Press apply and try connecting to ePrint again!
    Please post back and let me know if this worked for you!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • Need driver for hp laser jet 4 plus with windows 7

    need driver for hp laser jet 4 plus with windows 7

    Hi,
    A friend of mine uses USB-Parallel cable, he was saying it's ok
    Good luck,
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I HAVE A MAC NETWORK WITH A HP LASER-JET AND EVERYTHING IS WORKING FINE.  I ALSO HAVE A WINDOWS BASED MACHINE THAT I WOULD LIKE TO PRINT TO AS WELL.  HOW CAN I ACCOMPLISH THIS?

    I HAVE A MAC NETWORK WITH A HP1200 LASER-JET AND EVERYTHING IS WORKING FINE.  THE PRINTER IS CONNECTED DIRECTLY WITH ONE OF MY MAC-MINI"S.  I NOW HAVE A WINDOWS BASED PC AND WOULD LIKE TO PRINT TO IT AS WELL.. HOW CAN I DO THIS?

    Make sure that you Printer Sharing enabled on the Mac Mini.   System Preferences > Sharing > Printer Sharing
    Do the same on the PC
    On the PC, try downloading and installing Bonjour Print Services for Windows v2.0.2
    Run the application on the PC to see if it will discover your printer and install the printer.

  • Problems printing with  HP laser jet 5M and Snow Leopard

    Hello,
    Since In installed Snow Leopard on my mac I can no longer print with my HP laser jet 5M.
    I know this is because Appletalk is no longer supported, and that I should use the laser jet as IP printer. However, I couldn't figure out how to assign an IP address to the printer. It seems I can't do this by the config menus of the printer. I read somwhere it is possible to do this by terminal (telnet) but I am not familiar with unix.
    Can anybody help me to solve this problem?
    many thanks
    Marcello

    This should get you started
    http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

Maybe you are looking for