HP LaserJet 1000 not working with Airport Express

Has anyone had any luck getting a HP LaserJet 1000 working with Airport Express on Windows XP or even OS X for that matter?
I can connect to the Airport Express device using iTunes, but its pretty muched gimped for printing. uggh.
MacBook Pro   Mac OS X (10.4.6)   D-Link DI-524

I've no personal experience with your particular printer but these pages may help you
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?&lang=en&cc=uk&prodTyp eId=18972&prodSeriesId=45674&submit.y=7&submit.x=4&lang=en&cc=uk
http://www.ifelix.co.uk/tech/1013.html
Steve

Similar Messages

  • Mac OS X not working with Airport Express but Win XP is ok on the same iMac

    Hello everyone,
    as the message says I am having troubles with Airport Express.
    To say it quickly, I live in a house share in London, and everyone in the house enjoys the wifi without troubles. I do as well with my macbook from every point of the house.
    The troubles are with the big iMac: with mac os the internet signal won't just work at all, pages take minutes to load with both safari and firefox, and most of the times the loading times out.
    I thought it was a signal power problem, but the weirdest thing of them all is that... when I switch to Windows XP on the same iMac (and right now I am writing from that!) the internet works perfectly!
    Then I switch to mac os again... and slow internet again!
    Anyone has an idea of what could this be?
    Many thanks for the support

    Yes, I just discovered this problem on my own machine.
    I just wanted to check some settings and discovered that the behaviour of the GUI of Server Admin was somewhat "erratic": First this "no services are configured" message. Some of the configured servers were marked with the usual green "up and running" bullet, others dark grey - those were normally configured and running and clicking the appropriate line seemed to force Server Admin to check the actual state and then turned also green. But sometimes configuration pages were "greyed out", or while switching through the tabs Server Admin claimed that where were "unsaved changes" which should be saved (or discarded).
    And then SMB: this was light grey, as usual when a service is not running and clicking on it I browsed through the configuration tabs - everything seemed ok (all my settings were correctly shown, configured as PDC with right domain name etc.) - and I started the service. Then suddenly the configuration settings changed to the default settings - no more PDC, but a "standalone server" with workgroup name "WORKGROUP"...
    Looks for me, as if Server Admin lost it's "source" file for the configuration (the file in /var/db/smb.conf says, that it is automatically generated -- does somebody were the source file is stored?)...

  • HT1145 Why is iOS 5.1 AirPlay not working with Airport Express

    Ive updated my iPad and iphone to iOS 5.1 and now AirPlay is not working with my Airport Exress set up.
    Can anyone help me out? I can't seem to resolve this and I'm an apple head

    I have the same problem from my Ipad 2 and my Iphone 4S trying to airplay to my Apple TV 2. i dont get any airplay button when playing photos or \video.
    All worked fine with IOS 5.0
    Whats going on?

  • Xbox 360 not working with Airport Express

    I have a Airport Extreme router and I just bought a airport express so I can wirelessly relay the signal and hook up my xbox 360 to the express. I put it in WDS mode and it worked fine up until the xbox 360 ran the IP address test. It didn't pass the IP and my settings were on automatic. I thought the Express acts as a extension to the Airport but I guess not. Are there any settings I can change to make this work? Please help.

    Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

  • D-Link DIR-615 (Rev H1(!)) does not work with Airport Express?

    Hi there,
    I had my AirPlay working just fine with my Airport Express (AX) and my wireless N Router D-Link DIR-615 (Rev. B2). Now I changed my Internet provider and received a D-Link DIR-615 (Rev. H1) and I cannot find my AX anymore (I mean, it's still here, but the AirPort Utility cant find it!)
    Are there known issues between those two?
    (The Rev. H1/B2 is the Hardware Version of my D-Link DIR-615. The Firmware is up-to-date (8.01 I think))
    The status light is a solid, beautiful green.
    I already tried the following:
    - restart the AX, the D-Link and my MacBook (10.7.2)
    - changed from AES to TKIP (found that somewhere in the internet)
    - Reseted my AX to factory settings and configured everything new. (via Ethernet)
    Probably interesting:
    - After resetting to factory settings and configuring everything new, the AX showed up in iTunes, but when I tried to connect with it, it kept me waiting for 1-3 Minutes and simply did not connect w/o error message. The AX disappeared after restarting iTunes.
    I'm running out of solutions..
    Anyone a good question/suggestion or answer for me?
    greetings
    squob

    Only way I see out other than waiting, is to hook he Drive to a Mac, (FW preferable for speed), then get Tri-Backup...
    http://www.tri-edre.com/english/tribackup.html
    Which can be set to trigger Backups when Shares mount.

  • Time capsule base station not working with Airport Express

    Hi...
    I have a network setup using the airport base station hat is part of my (older) time capsule.  I also have an older Airport Express.
    My network is working fine...and looks like the first image below.  When I plug in the Airport Express and reset it...I get what you see on the second image.  The thing is...the airport utility is supporting the base station just fine prior to looking for the airport.  I presently have airport utility 6.3.2 and my airport base station has firmware 7.6.4. 
    Any help would be great....thanks!

    Your express is a G wireless model and not compatible with the N wireless TC.
    You can use it but only by using it with ethernet and setting it up as AP.. you also need to use 5.6 utility not v6.. apple removed support for G wireless devices from v6.
    LOL..
    I was 2min late.

  • Imac internet not working with airport express

    Hi there,
    I purchased an imac for my upstairs bedroom, but the signal from the time capsule was weak, so I bought an airport express and set it up. But still I cannot connect to internet even though after running the network diagnostics say I am connected to internet. My macbook works perfectly in the bedroom with all airport bars working, but the imac still has only two bars. I've tried everything, help!!

    Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

  • BT Home Hub not working with Airport Express

    We have just moved house and had BT Internet installed.  It uses the very latest Home Hub but this is causing the Airport Express to fail.
    On occasion it works but more often than not the connect is lost and the MacBook/Airport Utility fail to see the AE's again.
    What can I do to keep my Airport network up and running all the time.  I NEVER used to have this problem with my old set up at my home house.

    Whenever you make a change on your network.....in this case a new router......you need to reset the AirPort Express back to factory defaults and then reconfigure it again to work in the new environment.
    Power down the AirPort Express
    Hold in the reset button on the AirPort Express and keep holding it in for another 8-10 seconds as you plug the Express back in to power
    Release the reset button
    Allow 40-45 seconds for the AirPort Exrpess to restart
    Open AirPort Utility and click Continue to follow the guided setup to configure the Express to "join" your wireless network.

  • Photosmart C4280 not working with Airport Express

    I have a Photosmart C4280 connected to an Airport Express Base Station via USB for wireless printing. I have two computers that I want to use for printing - an iMac and a Toshiba laptop running Windows XP. Printing from the Mac works perfectly and required zero configuration. On the laptop I created the printer using Bonjour. It located the printer on the network without a problem and I selected the driver for the HP 4200 Series printer. However, when I try to print, the print job sits in the qeue and eventually I receive an error message that it couldn't print.
    I have disabled the Norton and Windows firewalls but that doesn't solve the problem. I have also tried some generic drivers but that didn't work. Does anybody have any additional suggestions?
    Thanks in advance.

    Check out http://discussions.apple.com/message.jspa?messageID=8883084#8883084
    It describes a Vista/AirPortExpress/C4280 installation, but should be relevant to XP.

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • I have a Sony Sa ns300, will it work with airport express to allow me to play iTunes in another room?

    I have a Sony NS 300 will it work with airport express?

    Not from the iPad, but you can from a computer.

  • Does Apple list available printers that work with AirPort Express?

    Just bought an AirPort Express hoping that I could print wirelessly with my HP 1350 All-in-One, and it won't work. Found out after the fact that my printer doesn't support USB wireless printing.
    I'm looking for a basic color printer to work with AirPort Express for wireless printing by other family members, and I'll continue to use my HP 1350 with USB for scanning and OCR functions.
    Does Apple provide a list of recommended printers that will work with AirPort Express?
    Kevin
    PowerBook G4 1.5 Ghz   Mac OS X (10.4.8)   1 GB DDR SDRAM

    No Apple doesn't any more.
    I have been maintaining a community created list.
    http://tech.ifelix.net/1013.html
    This is an unofficial list of USB printers which are are compatible with the AirPort Extreme Base Station and Airport Express. Printers in bold have been added to the original list that Apple provided.
    Printers in dark red are in fact the only printers I have personally tested.
    Please also note that due to changes in the firmware of both the Airport Extreme base station and the introduction of the Airport Express some printers which are in this list may no longer in fact be compatible.

  • Does airport extreme 802.11a/c work with airport express 802.11n

    does airport extreme 802.11a/c work with airport express 802.11n

    "You can use the AirPort Express to extend the signal provided by the new AirPort, but the Express will not extend "ac" wireless since it does not have that capability. The Express will extend an "n" wireless signal if that helps."
    This is what I am trying to understand.
    So AXTRM w/ sep SSID for 2.4 (b/g/n) - call it SSID1 - and 5GHz (ac) call it SSID2 - WiFi Explorer confirms AC mode on 5G.
    Using an AXPRESS to extend - I have the option of SSID1 b/g/n *and* the 5GHz ac SSID2 in the pulldown (it sees both?) --> if I select SSID1, it also extends this same SSID in 5GHz (both showing b/g/n) >> so I now have 3 signals on SSID1 (XTRM 2.4G, XPRS 2.4G and XPRS 5G) b/g/n and one signal on SSID2 (XTRM 5G AC) ac
    If I select the 5Ghz ac SSID2 to extend - it prompts me "do you also want to extend (the 2.4GHz SSID1)?" --> select yes and I now have 2 signals for SSID (XTRM 2.4G & XPRS 2.4G) b/g/n and 2 signals on SSID2 (XTRM 5G 802.11ac & XPRS 5G 802.11 a//n)
    Is the 5G SSID2 actually being extended from the Airport Extreme to the Express?
    The reason I bring this up is I am having a lot of issues since iOS8 came out (especially on iPhone 6). Everything I am reading is pointing to when people have 2 AP's set to use the same SSID. When you walk to a part of the house where 5G 802.11 ac signal marginalizes, the phone does not immediately hand over to the 5G 802.11 a/n Airport Express.
    My thought was separate the SSID's but to me, if the Express can't extend 5Ghz from the Extreme, it's taking a step backwards. I am better off getting a more powerful router like an ASUS and going with one AP, drop the WiFi roaming altogether
    Any thoughts?

  • Will ipod touch work with airport express?

    will ipod touch work with airport express?

    Is your Touch running iOS 5.n? If so, you can administer the AX with the AirPort Utility which you can download directly from the Apple App Store.

  • Will a TiBook with Tiger OS work with Airport Express?

    Will a TiBook with Tiger OS work with Airport Express?

    Use AirPort Utility 5.3.2 for Tiger. It will work with the current Express.

Maybe you are looking for

  • How to merge 2 part of two different Domdocument

    Hi, I try to copy on subtree from a first DOMdocument to a second DOMDocument and I receive a java null pointer exception. How can I copy one part of a DOM to another ? CREATE OR REPLACE PROCEDURE testDom IS BufferString VARCHAR2(32767) := '<TEST>tes

  • Image blur/morie

    Images in my doc are all fine no pixelation or blurring at all then for no apparent reason after working on the doc some more and exporting/saving in different formats I go back to the original and the images seem to become pixelated/blurred?!? All i

  • The contacts i am feeding are getting deleted

    when i am creating new contacts in the phone those contacts are getting deleted after 10-15 minutes. it happened 5-6 times that i saved a phone number from the last calls list, the name feeded appears but when i search for the same their is no such c

  • Applet Freezes

    When I run my applet it freezes, can anyone see what's wrong? public void paint(Graphics g)   g.drawImage(airplane, planesXPos, planesYPos, PLANE_WIDTH,                                 PLANE_HEIGHT, this);   g.drawString(numbers, textXPos, textYPos);

  • Can I recovery deleted photos from the trash bin?

    I accidentally deleted all of my photos , is there any chance I can recover them? I think I've deleted them permanently by emptying the trash bin.