HP Laserjet 1010 and Chrome

Hello, sorry if this is the wrong forum for this.
I am trying to set up my printer (HP Laserjet 1010) to my new Chromebook, but Google doesn't seem to like it.
Any ideas/tips for this?
Thanks

Hi,
The HP Laserjet 1010 does not support cloud services as ePrint, that mean that you can only install it on a Chromebook as a classic printer..
You will need to have the printer installed ad connected on a Windows PC or a Mac, then you may share it with your chromebook, you may follow HP classic printers (non e-Print enabled) below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02817255&lc=en
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP Laserjet 1010 paper jam issue

I know this is not specifically an Apple problem, but I have spent days searching for a solution elsewhere with no luck, so I was wondering if anyone here could help?
My HP LaserJet 1010 had some issues with printed pages not coming right through - they jammed right at the last minute when most of the page was out.
After carefully removing the sheet, the paper jam light is constantly flashing, despite there being no paper in sight. No amount of resetting, cleaning etc has any effect. Neither do the rollers move any more when it is switched on, as they are supposed to.
When I try to print, the driver program gives the error:
"Printer Error: The printer needs attention"
Any ideas for how to solve this would be much appreciated.

Chances are the printer has a small bit of paper that is still jammed in it. When paper jams always try to pull in the direction of the paper path! If it tears then remove the toner cartridge to see if you can see any bits of paper inside. I have the Laserjet 1012 which is a similar design, early in it's life I had a similar issue, after removing the toner cartridge and seeing all bits of paper were gone I still got an error. I then removed the top cover of the printer, located and removed the offending piece of paper, put it back together and now several thousands of pages later all is fine.
If that doesn't work then contact HP's support (they will reply to an email with 24 hours) or go the chat route. If you try to call because you are well out of warranty there will be charge.

Spry menu displays fine in FF and Chrome but not in IE

hello all -
as stated my Spry menu drops down fine (vertical) in FF and Chrome but in IE8 it displays horizontal. pls help & ty!
here is the CSS and an example page-
http://www.thelders.com/BlueRidge/ContactUs.html
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
#MenuBar1 {
margin:0 auto;
width:876px;
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal {
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive {
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li {
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul {
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible {
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li {
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul {
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible {
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul {
border: 1px solid #738dbb;
background-color: #ddd9c3;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a {
display: block;
cursor: pointer;
padding:6px 18px;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus {
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible {
background-color: #aac0db;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu {
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu {
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover {
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover {
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe {
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection {
ul.MenuBarHorizontal li.MenuBarItemIE {
display: inline;
f\loat: left;

First off read the notice on the index page of this forum
Announcement: Introducing Spry UI
Then add the following style rules to your document
ul.MenuBarHorizontal li {
width: 8em;
ul.MenuBarHorizontal ul {
width: 8.2em;
I hope this helps.
Ben

HP LaserJet 1010 not recognized by Windows 7 (64-bit)

My HP LaserJet 1010 (USB-printer) is not automatically recognized by Windows 7 (64-bit). I am unable to install the printer manually. I did locate a Vista 64-bit driver for this printer on the HP-website, but I don't understand how I could use the inf-file. I can't find a way to tell Win7 where to look...

Working solution on win 7 32 & 64 with driver lj1010serieshb-vista, did as follow:
connected printer, windows tried to auto install and failed, device was listed as unspecified.
googled for lj1010serieshb-vista(32/64).zip driver, downloaded from hp website, unzipped and extracted files.
Start > Run > PrintManagement.msc , then Print Servers > Localhost , right click on drivers > add driver > next > choose x86/x64 > next > have disk > browse to location of extracted
files, select hpc1015e.inf > ok > select hp laserjet 1010 hb > next > finish
Repeat above process and this time select select hp laserjet 1015 hb > next > finish , this step is needed as stated on previous post some files are missing on the 1010 driver and adding 1015 fixes the problem.
Now back to Devices and printers , right click on the unspecified device > troubleshoot > then will ask to search for driver, select "apply this fix" , it will find and install the correct driver from previous step > then will ask to set printer
as default, select "apply this fix" > then will ask if you want to share printer, select "skip this fix" if you don't want to share > close troubleshooter.
Now i have perfectly working printer, 'preferences' is working and not crashing win explorer and printer doesn't hung.
I guess you could first add the two drivers to your system before
connecting your printer and it would install perfectly but who would though this old printer would not work trough windows update.
thanks to the people who went by trial and error to find a working solution.

HP Laserjet 1010 & Wireless printing via Airport USB - Not working in SL

Hi There,
After just upgrading to Snow Leopard on my MacBook I tried printing wirelessly to my HP Printer, but no luck!
Printer: HP Laserjet 1010
Connected via: Airport with USB cable
Snow Leopard recognises the printer and is fine to print when the printer is connected directly to the MacBook via USB cable, but:
When I set up wireless printing, it finds the printer (via Bonjour) but simply will not print. The print monitor gets to 24% or so of the file processed and then just stops & fails.
Everything was fine under 10.5 Leopard. It seems it should work, but no printing occurs! Any ideas?
Many thanks,
Paul

I had a similar-sounding problem with my HP1012.
The fix:
a. power-cycled the Airport Extreme.
b. Updated firmware.
c. Select Print in an application.
For an extended discussion of what I did see here - some of this may help:
http://discussions.apple.com/thread.jspa?threadID=2142906&tstart=60
Actually, at this point I have two printers connected: Airport Extreme ->USB powered hub ->2 printers. One is the HP1012, the other is an HP 4300 series inkjet. Took sometime to get it right, the first hub I tried apparently was not powered enough. In that vein, one earlier thread (a response to one of my posts) pointed out the possibility that the AE -> printer USB connection might not be adequately powered, and to try using an intermediate hub. Assuming your AE is performing properly in all other respects, don't rule out a cable or other printer connection issue even if the setup was working properly before.
stan

Hp LaserJet 1010 how to install for windows xP

Hello to all.
My problem is I lose the cd for install my printer hp LaserJet 1010 on pc,so now i looking for download setup installation on pc then i install my printer becouse i use them lots and his inportant in my work

Hi,
Please try drivers from the following link:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=306507&swLangOid=8&swEnvOid=228
The latest one is more than 11 years old but should work for XP.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Проблемы установки принтера HP Laserjet 1010 в Windows 8

Есть ли какое то решение для установки принтера HP Laserjet 1010 в Windows 8. Пожалуйста помогите!

Жанна,
Как и я понимаю, ваш принтер HP Laserjet 1010 не работает с Windows 8. Поэтому вы искали решениу от HP, чтоби они решили что их принтер работили с Windows 8? Я вам желаю все успехи…
Иван
Janna,
From what I understand, your HP Laserjet 1010 printer is not compatible with Windows 8. So, you were looking for a decision from HP, that they would make their printer compatible with Windows 8? I wish you good luck with that!
John
HP and Microsoft websites showing Laserjet 1010 as not compatible with Windows 8:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=HP+Laser...

HP Laserjet 1010 drivers for windows 8

Hi sir,
I have printer hp laserjet 1010 i need drivers for windows 8 please help me i can't find that drivers in hp website.
Regards,
Ali

Hi Ali,
I am sorry to inform you, the printer is not supported on Windows 8.
You may find this information listed below:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=3...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to select and copy from adf table in IE and chrome if we enable row selection

Hi All,
We have an adf table and user wants to select and copy table cell values.
We enabled row selection on adf table. Ifrow selection is in place, IE and Chrome are not allowing user to select and copy data. But Firefox is allowing.
Do we have any solution to this? For our customer IE is the standard browser and they do test app on IE.
Regards
PavanKumar

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

I have a basic applet method timing problem with Firefox (and Chrome), not IE nor Opera. Works if JavaScript issues windows.alert() prior, fails otherwise.

I have an applet method, which is invoked from a JavaScript function, that is triggered by the window.onload event. The problem seems to center in the loading of the applet and its methods.
If I step through the 3 applet acceptance prompts (I chose to use a down-level Java), the applet method is never invoked, nor is an exception raised. How this happens is beyond my understanding.
As additional information, the Init(), start(), and "desired" Java methods all use the synchronized keyword. This is an attempt to minimize the exposure to a multi-thread environment.
If I issue a message from JavaScript (via window.alert()) PRIOR to invoking the method, I can get the desired results in special circumstances:
1) When the alert is presented, Firefox also prompts, SIMULTANEOUSLY, to block/continue the applet (the first of the 3 applet acceptance prompts). I can accept that these are separate threads.
2a) If I walk through the 3 applet acceptance prompts FIRST, and then hit the OK button on the alert message SECOND, I get the desired results, my applet method executes, and all is well (other than the fact that I would prefer not to have the alert in place at all).
2b) If I hit the OK button on the alert message FIRST, and then walk through the 3 applet acceptance prompts SECOND, I get the same results as when the page loads WITHOUT the alert, which is the applet method is never invoked, nor is an exception raised. Weird, huh?
The above problem only occurs when the browser and the applet's URL are loaded for the first time.
Subsequent invocations (after the page & applet has been loaded initially) do not have the failing symptoms.
It is my understanding that IE and Firefox (and Chrome and Opera, for that matter) each use the same implementation of JavaScript provided by Microsoft. Please correct me if this information is inaccurate.
The failing page and it's applet are proprietary; I cannot provide the Internet URL, nor the Java or JavaScript source, to aid in your analysis.

I can speak to the source code, but have no access to it.
The current process/thread that invokes an applet method must check to see that the applet is not currently being loaded by another process/thread. If it is being loaded, the current process/thread should block until the load is complete, THEN attempt to invoke the applet method.
Please forward my concern to a knowledgable developer. The nature of the problem, once identified, can be addressed in a very straightforward manner.

[SOLVED] Forms Web - Works on IE and Chrome, firefox says it misses plugin

Greetings,
Both in IE and Chrome it works perfectly i open the Gin client through the same URL, ex: http://10.0.0.28:7778/forms/frmservlet?config=gin4
However if i try the same URL in firefox it shows a big grey square in the page saying "Click here to download Plugin"
Clicking instal it opens a small popup saying no suitable plugins were found, inside it says and Unknown Plugin (text/html) and a button to installs manually appears.
Clicking on that button i am taken to this page: http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
I have lost track on the number of times i have installes uninstalled and reinstalled a lot of java versions not just the 1.4.2_06 version.
I have been trying to fix this problem for a couple of months now with no luck.
Here is the Source code from the html page, its the same for every browser since its the same url:
<HTML>







































<HEAD><TITLE>GIN - Gestao Integrada do Negocio - WebUtil</TITLE></HEAD>
<BODY >
<COMMENT id="forms_plugin_info"
plug_ver="clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA"
appheight="800"
appwidth="900"
appcodebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06">
</COMMENT>

<NOSCRIPT>
<OBJECT classid="clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA"
codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06"
WIDTH="900"
HEIGHT="800"
HSPACE="0"
VSPACE="0">
</NOSCRIPT>
<SCRIPT LANGUAGE="JavaScript" SRC="java/forms_ie.js"></SCRIPT>
<PARAM NAME="TYPE" VALUE="application/x-java-applet;jpi-version=1.4.2_06">
<PARAM NAME="CODEBASE" VALUE="/forms/java">
<PARAM NAME="CODE" VALUE="oracle.forms.engine.Main" >
<PARAM NAME="ARCHIVE" VALUE="frmall.jar, ginico4.jar, laf.jar,formsmagnifier.jar,formsmagnifier10123.jar,handleimage3.jar,fjtable.jar,frmwebutil.jar, jacob.jar" >
<PARAM NAME="serverURL" VALUE="/forms/lservlet?ifcfs=/forms/frmservlet?config=gin4&acceptLanguage=en-US,en;q=0.8">
<PARAM NAME="networkRetries" VALUE="30">
<PARAM NAME="serverArgs"
VALUE="escapeParams=true module=GINFS001.fmx userid= sso_userid=%20 sso_formsid=%25OID_FORMSID%25 sso_subDN= sso_usrDN= debug=no host= port= buffer_records=no debug_messages=no array=no obr=no query_only=no quiet=yes render=no record= tracegroup= log= term=/orasoft/OraHome_1/forms/admin/resource/US/fmrpcweb.res UTI= PASS= IDIOMA= ADMGIN=admgin PM$CSS_FILENAME=/gin/gin4/exe/forms.css">
<PARAM NAME="separateFrame" VALUE="true">
<PARAM NAME="splashScreen" VALUE="no">
<PARAM NAME="background" VALUE="FUNDO.jpg">
<PARAM NAME="lookAndFeel" VALUE="oracle">
<PARAM NAME="colorScheme" VALUE="blue">
<PARAM NAME="serverApp" VALUE="default">
<PARAM NAME="logo" VALUE="REMATE_MENU.gif">
<PARAM NAME="imageBase" VALUE="codebase">
<PARAM NAME="formsMessageListener" VALUE="">
<PARAM NAME="recordFileName" VALUE="">
<PARAM NAME="EndUserMonitoringEnabled" VALUE="">
<PARAM NAME="EndUserMonitoringURL" VALUE="">
<PARAM NAME="heartBeat" VALUE="">
<PARAM NAME="WebUtilLogging" VALUE="off">
<PARAM NAME="WebUtilLoggingDetail" VALUE="normal">
<PARAM NAME="WebUtilErrorMode" VALUE="Alert">
<PARAM NAME="WebUtilDispatchMonitorInterval" VALUE="5">
<PARAM NAME="WebUtilTrustInternal" VALUE="true">
<PARAM NAME="WebUtilMaxTransferSize" VALUE="16384">
<COMMENT>
<EMBED SRC="" PLUGINSPAGE="http://java.sun.com/products/archive/j2se/1.4.2_06/index.html"
TYPE="application/x-java-applet;jpi-version=1.4.2_06"
java_codebase="/forms/java"
java_code="oracle.forms.engine.Main"
java_archive="frmall.jar, ginico4.jar, laf.jar,formsmagnifier.jar,formsmagnifier10123.jar,handleimage3.jar,fjtable.jar,frmwebutil.jar, jacob.jar"
WIDTH="900"
HEIGHT="800"
HSPACE="0"
VSPACE="0"
serverURL="/forms/lservlet?ifcfs=/forms/frmservlet?config=gin4&acceptLanguage=en-US,en;q=0.8"
networkRetries="30"
serverArgs="escapeParams=true module=GINFS001.fmx userid= sso_userid=%20 sso_formsid=%25OID_FORMSID%25 sso_subDN= sso_usrDN= debug=no host= port= buffer_records=no debug_messages=no array=no obr=no query_only=no quiet=yes render=no record= tracegroup= log= term=/orasoft/OraHome_1/forms/admin/resource/US/fmrpcweb.res UTI= PASS= IDIOMA= ADMGIN=admgin PM$CSS_FILENAME=/gin/gin4/exe/forms.css"
separateFrame="true"
splashScreen="no"
background="FUNDO.jpg"
lookAndFeel="oracle"
colorScheme="blue"
serverApp="default"
logo="REMATE_MENU.gif"
imageBase="codebase"
recordFileName=""
EndUserMonitoringEnabled=""
EndUserMonitoringURL=""
heartBeat=""
WebUtilLogging="off"
WebUtilLoggingDetail="normal"
WebUtilErrormode="Alert"
WebUtilDispatchMonitorInterval="5"
WebUtilTrustInternal="true"
WebUtilMaxTransferSize="16384"
>
<NOEMBED>
</COMMENT>
</NOEMBED></EMBED>
</OBJECT>

</BODY>
</HTML>
Any help is appreciated.
Best regards,
Igor Carrasco

In the Java plugins i see :
Java(TM) Platform SE 6 U20
File: npjp2.dll
Version: 6.0.200.2
Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
MIME Type      Description      Suffixes
application/x-java-applet      Java Applet
application/x-java-bean      JavaBeans
application/x-java-vm
application/x-java-applet;version=1.1.1
application/x-java-bean;version=1.1.1
application/x-java-applet;version=1.1
application/x-java-bean;version=1.1
application/x-java-applet;version=1.2
application/x-java-bean;version=1.2
application/x-java-applet;version=1.1.3
application/x-java-bean;version=1.1.3
application/x-java-applet;version=1.1.2
application/x-java-bean;version=1.1.2
application/x-java-applet;version=1.3
application/x-java-bean;version=1.3
application/x-java-applet;version=1.2.2
application/x-java-bean;version=1.2.2
application/x-java-applet;version=1.2.1
application/x-java-bean;version=1.2.1
application/x-java-applet;version=1.3.1
application/x-java-bean;version=1.3.1
application/x-java-applet;version=1.4
application/x-java-bean;version=1.4
application/x-java-applet;version=1.4.1
application/x-java-bean;version=1.4.1
application/x-java-applet;version=1.4.2
application/x-java-bean;version=1.4.2
application/x-java-applet;version=1.5
application/x-java-bean;version=1.5
application/x-java-applet;version=1.6
application/x-java-bean;version=1.6
application/x-java-applet;jpi-version=1.6.0_20
application/x-java-bean;jpi-version=1.6.0_20
and this also:
Java Deployment Toolkit 6.0.200.2
File: npdeployJava1.dll
Version: 6.0.200.2
NPRuntime Script Plug-in Library for Java(TM) Deploy
MIME Type      Description      Suffixes
application/java-deployment-toolkit
Plus a lot more plugins not from Java.
Best regards

Flash not working in Safari (and Chrome and Firefox) - possible solution

Yesterday my Mac crashed (actually when I was away from it) and when it rebooted, Adobe Flash would freeze any web browser it ran in (Safari, Firefox and Chrome - which surprised me as I thought it used a different version of Flash). Great with so many live-blogs happening in the world of news right now.
I tried all the usual suspects:
* Deleted browser caches;
* Uninstalled Flash (Adobe have an uninstaller available) and reinstalled the same version;
* Uninstalled Flash and reinstalled the newest version;
* Made sure I had no duplicate fonts (I did) as I'd experienced problems with this with an iPhoto upgrade;
* Checked recent upgrades (iWeb and Camera updates) to see what they installed (nothing dangerous);
* Fixed permissions (they needed it);
* Tried running Safari under 32-bit (didn't think that would work as I hadn't updated Flash itself);
* Signed in as another user.
None worked.
As a last resort, I downloaded the latest version of the Onyx utility (freeware) and ran the Maintenance scripts, then, under Cleaning, deleted System cache, User cache, Internet stuff (left the cookies), and Font caches (you'll need to Close all the dialog boxes then Restart at the end). Expect a long reboot.
That worked.
It may not work for everyone but may for someone.
Scott

I was having the same issue. I logged into another account, a plain no add-ons account and found that I could view flash content with Safari OK. That mean that there was some preference file in my primary account that was the culprit.
Here's how to cull out the bad apple (pun intended):
Trouble Shooting Preferences
Go to HD/Users/Your_name/Library. Move the Preferences folder (in its entirety) to the Desktop and make a second copy of it so you have Copy A and B. Now try the the process again and determine if problem is fixed.
If the problem IS fixed, then go to the new Prefs folder that the OS will have created and open it up.
Open Copy B on the Desktop and select all of the items inside. Drag them into the open new library folder. When the Copy window comes up check the Apply to All check box and then click on the Don't Replace button as seen here. That will keep the new files created and bring back all of the others.
If the problem is NOT fixed, trash the new Prefs folder and move the intact Copy A folder back to the Library folder .
This cleared it up. I ended up with 16 items that were not put back in the preference folder.
Hope this will work for some of you.
Do you Twango?

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise o

Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you.
== This happened ==
Every time Firefox opened
== Crystal Report Viewer (flash based) is displaying partial of the flash interface. It is working well on Firefox 3.6.7 and below but not in Firefox 3.6.8. It is also working well on Internet Explorer and Chrome and Safari. Please check if you can advise on this problem we are facing. Thank you. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.78 Safari/532.5

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages
You can try if it works if you disable OOPP (Out-Of-Process-Plugins) for Flash
You can set the prefs dom.ipc.plugins.enabled.* to false on the about:config page to disable the plugin-container process.
dom.ipc.plugins.enabled (currently false by default)
dom.ipc.plugins.enabled.npswf32.dll (Flash)
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.

Sessions not working in Firefox, Safari and Chrome, but working in iexplore

Hi,
I have been running Tomcat 5.0.18 jdk 1.4. and have just upgraded to Tomcat 6.0.24 jdk 1.6..
I have an app that you need to log on to in a jsp page. When succesfully logged in it redirects to a framed page with 3 pages in it.
All elements of that framed page check for a valid session, if there is one, it displays itself, if not, it redirects back to the log on screen.
This has worked fine for years in all browsers. But since upgrading, in Firefox, Safari and Chrome, when the parent framed page jsp checks for a session, its fine, it passes, but when the other sub-frame pages check for a session, it comes back as a new session, i.e. its not picking up the session that has just been validated and redirects to the login page. Iexplore still works fine. i.e. all 3 pages validate ok.
Any ideas why these browsers are not pickng up the session?

As a test, try putting an empty JSP in front of it that triggers the session to be created, and then redirects (with a HTTP meta refresh for example) to the frameset jsp to see if that fixes anything.
If that fixes it, then I guess the pages load too quickly.

Safari and Chrome shutting down

Safari and Chrome shuttingdown what to do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

HP Laserjet 1010 and Chrome

Similar Messages

Maybe you are looking for