HP Laserjet 1018 (No Printing After Upgrade)

I know this printer isn't exactly supported but with the foo2zjs drivers i was able to get it working in Tiger before the upgrade on both my iMac and my wife's new Macbook.
I have fully reinstalled the drivers in attempt to get it to work again but with no success.
The printer is attached via my Airport Express and loads up fine in bonjur and the foo2zjs drivers load and everything looks fine.
When i push out the firmware to the printer the printer does not respond and the logs show that the drivers are all operating properly.
But of course the printer does not function at all.
Anyone else have these problems?

The plot thickens on this mystery, as Matt said after the Installer was updated it did fix some problems.
But now I guess my question has changed.
I decided to move the printer from its Location and remove it from the Airport Express!
I attached the printer directly to my computer and sent the firmware to it. The firmware did what it was supposed to do! It spun up the printer (made its little printer sounds) and then I was able to print!!!!
Now I reattached it to the airport express and of course. It no longer works!
I send the firmware via the scripts and the printer Que. says that it has sent it and it has completed but none of those normal sounds etc!
Here is the Cups Log.
I [12/Nov/2007:10:49:34 -0500] Setting HPLaserJet1018 device-uri to "mdns://HP%20LaserJet%201018.pdl-datastream.tcp.local./?bidi" (was "file:/dev/null".)
I [12/Nov/2007:10:49:34 -0500] Setting HPLaserJet1018 printer-is-accepting-jobs to 1 (was 0.)
I [12/Nov/2007:10:49:34 -0500] Setting HPLaserJet1018 printer-state to 3 (was 5.)
I [12/Nov/2007:10:49:34 -0500] Saving printers.conf...
I [12/Nov/2007:10:49:34 -0500] New printer "HPLaserJet1018" added by "root".
I [12/Nov/2007:10:49:34 -0500] Setting HPLaserJet1018 printer-is-shared to 0 (was 1.)
I [12/Nov/2007:10:49:34 -0500] Saving printers.conf...
I [12/Nov/2007:10:49:34 -0500] Printer "HPLaserJet1018" modified by "root".
I [12/Nov/2007:10:49:45 -0500] [Job 232] Adding start banner page "none".
I [12/Nov/2007:10:49:45 -0500] [Job 232] Adding job file of type application/vnd.cups-raw.
I [12/Nov/2007:10:49:45 -0500] [Job 232] Adding end banner page "none".
I [12/Nov/2007:10:49:45 -0500] [Job 232] Queued on "HPLaserJet1018" by "scottginn".
I [12/Nov/2007:10:49:45 -0500] [Job 232] Started backend /usr/libexec/cups/backend/mdns (PID 496)
I [12/Nov/2007:10:49:58 -0500] [Job 232] Completed successfully.
I [12/Nov/2007:10:50:33 -0500] [Job 233] Adding start banner page "none".
I [12/Nov/2007:10:50:33 -0500] [Job 233] Adding job file of type application/postscript.
I [12/Nov/2007:10:50:33 -0500] [Job 233] Adding end banner page "none".
I [12/Nov/2007:10:50:33 -0500] [Job 233] Queued on "HPLaserJet1018" by "scottginn".
I [12/Nov/2007:10:50:33 -0500] [Job 233] Started filter /usr/libexec/cups/filter/pstops (PID 521)
I [12/Nov/2007:10:50:33 -0500] [Job 233] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 522)
I [12/Nov/2007:10:50:33 -0500] [Job 233] Started backend /usr/libexec/cups/backend/mdns (PID 523)
I [12/Nov/2007:10:50:49 -0500] [Job 233] Completed successfully.
E [12/Nov/2007:10:51:39 -0500] CUPS-Delete-Printer: Unauthorized
I [12/Nov/2007:10:51:39 -0500] Printer "HPLaserJet1018" deleted by "root".
I [12/Nov/2007:10:51:39 -0500] Saving printers.conf...
E [12/Nov/2007:10:53:17 -0500] CUPS-Add-Modify-Printer: Unauthorized
I [12/Nov/2007:10:53:17 -0500] Setting HPLaserJet1018 device-uri to "usb://Hewlett-Packard/HP%20LaserJet%201018?serial=KP0F1KQ" (was "file:/dev/null".)
I [12/Nov/2007:10:53:17 -0500] Setting HPLaserJet1018 printer-is-accepting-jobs to 1 (was 0.)
I [12/Nov/2007:10:53:17 -0500] Setting HPLaserJet1018 printer-state to 3 (was 5.)
I [12/Nov/2007:10:53:17 -0500] Saving printers.conf...
I [12/Nov/2007:10:53:17 -0500] New printer "HPLaserJet1018" added by "root".
I [12/Nov/2007:10:53:17 -0500] Setting HPLaserJet1018 printer-is-shared to 1 (was 1.)
I [12/Nov/2007:10:53:17 -0500] Saving printers.conf...
I [12/Nov/2007:10:53:17 -0500] Printer "HPLaserJet1018" modified by "root".
I [12/Nov/2007:10:53:30 -0500] [Job 234] Adding start banner page "none".
I [12/Nov/2007:10:53:30 -0500] [Job 234] Adding job file of type application/vnd.cups-raw.
I [12/Nov/2007:10:53:30 -0500] [Job 234] Adding end banner page "none".
I [12/Nov/2007:10:53:30 -0500] [Job 234] Queued on "HPLaserJet1018" by "scottginn".
I [12/Nov/2007:10:53:30 -0500] [Job 234] Started backend /usr/libexec/cups/backend/usb (PID 591)
I [12/Nov/2007:10:53:32 -0500] [Job 234] Completed successfully.
I [12/Nov/2007:10:54:01 -0500] [Job 235] Adding start banner page "none".
I [12/Nov/2007:10:54:01 -0500] [Job 235] Adding job file of type application/postscript.
I [12/Nov/2007:10:54:01 -0500] [Job 235] Adding end banner page "none".
I [12/Nov/2007:10:54:01 -0500] [Job 235] Queued on "HPLaserJet1018" by "scottginn".
I [12/Nov/2007:10:54:01 -0500] [Job 235] Started filter /usr/libexec/cups/filter/pstops (PID 606)
I [12/Nov/2007:10:54:01 -0500] [Job 235] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 607)
I [12/Nov/2007:10:54:01 -0500] [Job 235] Started backend /usr/libexec/cups/backend/usb (PID 608)
I [12/Nov/2007:10:54:05 -0500] [Job 235] Completed successfully.
Could this be another problem entirely?
what is MDNS?
I put this on 2 different computers, mine and my wife's macbook and same effect on both.
Thanks so much in advance

Similar Messages

Problems with your HP printer after upgrading to Windows 8.1

If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
www.hp.com/go/tools.
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions work just fine.
I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

Reconnecting to a wireless printer after upgrading to Yosemite 10.10.

We upgraded Mac software to 10.10 and lost connection to our HP Photosmart Plus wireless printer. Attempts to find the printer via hostname and/or IP address keep failing. Any ideas of how to proceed?

Hello @DirkStuart ,
Welcome to the HP forum.
I understand that you are having problems with your printer after upgrading to Yosemite.
I would like to direct you to a post by Double-U-Dee.
Mac OS 10.10 Yosemite and HP Printer Support
Also here is Apples OS X Yosemite: Printing troubleshooting.
If these do not have the answer you are looking for, please let me know.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Elements 11 will not print to my epson stylus r1800 printer after upgrading from windows 8 to 8.1

Elements 11 will not print to my Epson stylus r1800 printer after upgrading to windows 8.1 from windows 8

I cant access any printers, not even the virtual printers.
What I would do is use ProcMon to find out why that Event entry was written. Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable. Since IE9 there have been new .dll involving printing
which have not been reflected in any of our repair tools. However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
unreliable techniques. E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.) For example.
Robert Aldwinckle

Hp P2015d can't print after upgraded to 10.5

i can't use my network printer after upgrade to 10.5 from 10.4, anyone can help??
printer is P2015d

Use the Leopard dvd and do a Custom Install of the HP drivers to install the drivers. When that is done, delete the printer and re-add it using the new driver.
Hope this helps.

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

HP LaserJet Pro P1102w Printer - Firmware Upgrade

In her apartment, my elderly mother has an HP LaserJet Pro P1102w printer, that I set up for her.
It’s hooked up, via WiFi, to her Router that's attached to her Cable Modem.
She doesn't have her own PC. She has only the printer.
When the printer was first purchased, I brought the printer and my Windows XP laptop to her home and installed the printer there.
I email documents to her printer's HP ePrint email address, and I also print web pages to the printer using Google Cloud Print. I do this from my own home, to send her information from the Internet.
An email was received today, saying the following:
"A free firmware upgrade is required to keep your ePrint and associated Print Apps service working. Please go to www.hp.com/go/eprint, download the newest firmware, and continue using your ePrint solution. If you do not complete the upgrade, your ePrint and Print Apps may not work after Hewlett-Packard has finished a service upgrade on 08/07/2013.
Devices requiring the free firmware upgrade are as follows:
HP LaserJet Pro P1100 Series (model HP LaserJet Pro P1102w)”
Is there any way for me to use my Windows XP laptop, to connect to the printer, remotely over the Internet, via the printer's HP ePrint email address, or via the HP Connected account, or in any other way,
and initiate the printer’s firmware upgrade, without leaving my home?
Thank you.

Hi, the short answer is no.
Read the "How to Install" at this link.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

HP P1006 DOES NOT PRINT after upgrading to a Macbook Pro 15 i7

HP P1006 does not work after upgrading to a Macbook Pro 15 i7 2,6 with Mac OS 10.6.3
I have used Time Machine to migrate from my previous MBP 15 C2D.
I've tried to remove the printer in system pref. and install it again.
The installer works fine but close to the end of the installation a new app is starting: HP Laserjet Firmware Update Utility, which won't start and just stays jumping at the dock, although the HP Installer succeeds to finish installing.
So when i try to print, the printer stays idle.
I have tried to download the installer from HP official website. Same story.
Also tried to do Permission Repair in Disk Utility
Please, if anyone knows a solution, help!

After the 4th try of Installing the software it finally worked!
Thanks anyway!

Can't Print After Upgrading to Windows 8.1

My HP4100 is connected via USB adapter, since printer ports no longer come with computers, and my (older) HP4100 requires one. (I have a HP700 desktop.)
After upgrading, the printer was gone from Printer Setup. I downloaded the "HP Print and Scan Doctor", which found the right driver, which I installed. Great. Now the printer shows up, but every time I try to print to it, I just get "Printer HP4100 is in an error state." Extremely informative message, I must say. I rely on this printer for our business. Now what?
Frustrated.

I downloaded the 64-bit driver, but that didn't work either. The HP rep said that the printer won't work on Win 8.1. Funny, he never mentioned a different adapter as a potential solution - he just went right to selling me a new printer. I loved my HP4100. Had it for 13 years and it never failed us. It is a workhorse printer, with real steel paper trays and moving parts, etc. at a time when most parts in most printers are all plastic.

Cannot Print after upgrading to Mountain Lion

I can not longer print since upgrading to Mountain Lion 10.8.2. Prior to the upgrade I was printing; now, even though my printer is on the list (HP Officejet 7410xi, All-in-one) as being compatible, I still get "Power PC applications are not longer supported". On HP's website there was no help since the ML Upgrade contained the necessary drivers to print with. Any help or suggestions would be highly appreciated. Oh, I am new at this...so, please...KIS (Keep It Simple). Thanks!

I have a very similar problem that this solution has not fixed.
My HP 882C was no longer supported when I upgraded to Mountain Lion. I worked around for awhile through Windows that I have running on the Virtual Machine. Then, that went south.
So I now have a HP Officejet 6700. I've unsuccessfully tried to install it as a wireless; it kept hanging trying to creat the print queue. Now, I've connected it via the UCB and still can't get it installed. I did what you've suggested here. After deleting the files and downloading and installing the software from Apple I rebooted the system. It recognized that there was a printer and began setting up the 'HP Officejet 6700...'. It began processing with the message "Finding software..." displayed. Then it stopped with the following message:
"Can't install the software for the HP Officejet 6700 because it is not currently available from the Software Updaye Service."
I've also downloaded the software from HP several times, not succeeding there either.

HP Laserjet 1018 - Not Printing - Both lights on solid

Hi,
My printer seems to have encountered some sort of fault. It starts up fine and is recognised by XP. However, when printing, it seems to accept the data transfer but stall at the actual printing part.
I've rested it for 30 mins and had a look inside but I can't see anything that sticks out as causing a problem. Attempting to print a test page results in the same; normal operation until the actual print is just about to start and then both lights go solid and the printer is unresponsive.
Any help very much appreciated. I've run the HP diagnostics utility and that doesn't turn up and problems.
Thanks,
John

A Google search for "Laserjet 1018 Service Mnaual" turned up this one that may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Hp laserjet cp2015dn not working after upgrading to Yosemite

After upgrading to OS X Yosemite 10.10.3 my HP Laserject CP 2025n printer is not working. It worked perfectly in the old system. I have tried deleting hte printer. Then when I add it back on it gets to the steps wher it says Setting up HP Color Laserect CP2025dn and it stalls (it stays at this step for more than 3 minutes) . It says "Setting up the device" In this window I have two options configure or cancel. After waiting 5 min I selected connfigure but this does not work.
I tried turning it off/on before trying a second time, this did NOT work.
I checked for new drivers, there are none. I seem to have the latest.

OS X Yosemite: Reset the printing system

Can not print print after upgrade to Mac OS 10.8 Mountain Lion

Hi all,
I just upgrade Macbook air to Mountain Lion, but after upgrade it can not print due to "hold for Authentication" error. Mac asking for User name and password, I tried to enter my mac User name and password but can not help.
I change to other type of printer but still same problem
I also try to reinstall Mac Mountain Lion from start(not update from Lion) but still face off same problem.
Is there anybody can help me for this? I was in big trouble for this problem for over the week.
Thank you so much

hi . I had the simalar problems of my HP b209a-m printer not being seen on my wireless network> I found this post on HP Discussion Board and it worked!
1. On the printer navigate to the Wireless or Network menu.
2. Select Restore Defaults.
3. On your computer look for a wireless network named 'hpsetup' and connect to it.
4. Print a Wireless Network Test from the front of the printer to see its IP address. (on my b209a-m Printer the IP info was found by pressing the Wireless Icon)
5. Type the IP address into the address bar of a web browser to see the printer's internal settings.
6. Click on the Network tab and look for the Wireless Setup Wizard and run it.
7. The Passphrase is the password you use on your wireless connection.
8. Now change the network name on your computer back to your wireless network.
The printer will now be connected to your network. Connect the computer back to the network and re-add the printer from System Preferences.
Hope this works--- it did for me.
Jim

Unable to print after upgrading to Snow Leopard (Dell 1320C) - Network

This recently started after upgrading to Snow Leopard.
The OSX drivers worked well with Leopard 10.5.xx but after upgrading to Snow Leopard, i keep getting "network host busy" or "could not connect to printer".
I've tried completly removing printer, reinstalling (IP based), drivers etc etc I even resetted the printing system (right clicking and reseting in the printers list).
This works fine with Leopard but it fails on Snow Leopard..

I had the same problem not being able to print to Dell 1320c after upgrading to Snow Leopard. Here is a work around for the Dell 1320c printer to work on Mac with Leopard 10.6.2
Do not use the printer driver from Dell. Delete the Printer Setup from your Mac.
Locate Mac Driver Suitable for 10.5 (Version 1.7) at http://www.fujixeroxprinters.com.au/en/support/Downloads.aspx?product=5452&categ ory=5726
Double click the icon to install after it downloads. It should create file DPC525AAPv17x5.dmg. When the install is finished you can delete the installer.
From the Apple menu open System Preferences and select Print & Fax.
Click the + to add a printer.
Select IP Printer.
Select for the Protocol: Line Printer Daemon - LPD
Type the IP address: 192.168.1.xxx or whatever your printer is assigned on your network. (If you don't know, go to your printer and hold down the Green button until the configuration sheet prints. You can see the IP address once printed.)
Name the printer "Dell Color Laser 1320c" or whatever you'd like to call it.
For Print Using select: FX
Next select FX DocumPrint C525 A-AP v1.7 in the box below.
On the next screen you must select 250 Sheet Feeder as an option. Otherwise it will only be able to manual feed.
Click Ok.
Go to Print something, File... Print... but don't click the Print button yet.
Under Pages: go to the Drop Down and select Fuji Xerox Features.
Find the Paper Source Drop Down and select Tray 1 (250 sheets),
then go up to Presets: Drop Down above and select Save As...
and under Preset Name, type Standard-1, leave This Printer Only and click OK.
Now you can click the Print button. This will set the Dell 1320c printer to print from the document tray and not try to manually feed all the time.
Anyway, that's the work around to use the Dell 1320c Color Laser printer under Mac OS Snow Leopard 10.6.x.
Hope this helps!
Good Luck
P.S. I guess eventually Dell might come out with an updated driver, but don't hold your breath...

Firefox 13 or 14 won't print after upgrade

After upgrading from FF 13, I am no longer able to print from any website--the system print dialog box fails to open. This bug is also present in FF14 Beta as well.
I have already attempted to reset printer.printer (all of them) from about: config with no success. If I roll back to FF12, the bug is still occurring. The only solution that I have found is restoring a previous restore point.
Selecting print within print preview or control+p does not work as well.
I have also started FF in safe mode with no plugins/add on's with the same result.
Does anyone have any other suggestions?

Hi jscher2000 -- You're are correct, there is no error message, and no print dialog. I already tried changing the default printer on the system level and the same bug is occurring.
cor-el -- I have reset FF and created a new profile, sadly, nothing has changed.
I'm am thinking there may be a .dll change with the new update that is affecting the print dialog; but that is just one possible theory.
While researching this on Google, it appears that this has happened to others in the past with various version, however, there was no solution.
More ideas would be appreciated. In the meantime, it looks like I'm going to restore a restore point and use a previous version until there is a fix or workaround.

HP Laserjet 1018 (No Printing After Upgrade)

Similar Messages

Maybe you are looking for