HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop until you shut off. It resumes printing when you turn the 1022nw back on
Have renistalled Driver
It worked fine with Vista and XP

Hello @Astronav,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the issue of multiple pages continuously printing from your Windows 7 computer to your HP LaserJet 1022nw Printer. However, in order for me to provide you with accurate support I do need to know how your printer is connected to your Windows 7 computer.
Normally the continuous printing issues are caused by your router. When you send the print command to your printer from your computer than the print command goes from your computer to your router and finally to the printer. If there is a conflict with your router it may constantly send the signal to the printer to 'print' a job. Or, if the printed text is garbled information and weird symbols that your printer is printing it could be commands from the router to your computer that are improperly being sent to your printer and resulting in a page of weird symbols printing.
Therefore, it is very important for me to know how your printer is connected to your computer as that will guide us in the what direction we need to be troubleshooting.
Once I find out how your printer is connected to your computer I will be able to provide you with step-by-step instructions on how to resolve this continuous print issue. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Is the Tiger 10.4.x can run with any new computer like 2.66Ghz or up

Is the Tiger 10.4.x can run with any new computer like 2.66Ghz or up?

No,
Earlier Intel Macs in this CPU range came with OS X 10.5 Leopard as their basic, installed OS X version.
Later models in this range came pre-installed with either OS X 10.6 Snow Leopard or OS X 10.7 Lion or OS X 10.8 Mountain Lion.
Sorry,

Laserjet 5000 with windows 7 driver cannot print multiple copies unless disabling mopier

Customer has Laserjet 5000 that they have been using for approx 5 years. It is connected to one computer with the standard parallel cable and the driver is using lpt1. It is used mainly to print word documents and a multi page publisher document. The computer used to be a windows xp computer and all worked well with the PCL6 driver and that is the only driver that was used
They just bought a new Windows 7 32 bit computer and now it has lost some of the functionality.
The first driver that was loaded was the driver that Windows 7 used after you use the windows update button that you get during the add printer wizard. I think it was the pcl 5 driver as that is the driver that the computer will install if you remove the printer and then restart the computer. Using this driver, when you choose to print more than one page or multiple copies, it will just print the first page or copy and there will not be any errors displayed.
I have since downloaded the PCL6 driver, PS driver and PCL5 driver from HP's website and tried all of them.
The PS driver will print more than one page, but when it gets to about the 4th page the printer prints out an error page. The error is PCL XL error, Subsystem: Kernel, Error: Unsupported protocol, Operator 0x0, Position:0
The PCl 6 driver will print the same error page and not print any print jobs, even if it is just a single page, single copy job.
The pcl 5 driver prints one page and then stops printing, no errors.
When I disable the mopier under device settings, the pcl5 driver will print everything just fine. Only problem is, it will not collate. The collate checkbox is available and checked when we try the multiple page multiple copy publisher document, but it just prints out as if we do not have collate checked. If we could get collation to work, than we are good to go.
I have not tried the PS driver with the mopier disabled.
The PCL6 driver stills returns the pcl xl error with the mopier disabled.
The printer does not have any extra memory, just the 4 mb standard that came with the printer. I am wondering if this is a memory issue triggered by Windows 7and I just need to get more memory for the printer. (Computer has 4 gb of memory)
Anybody else have a similar issue and got theirs fixed?
Thanks in advance.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet 1022nw printing multiple copies

HELP! Ever since I purchased my new laptop with Windows 7, my LaserJet has been going crazy. I reinstalled new drivers and used the HP diagnostic tool and it says "all is working correctly". However, when I print a document of any size (even if just one page), the printer keeps re-printing multiple copies until the paper runs out or I turn the printer off. I have un-installed and reinstalled several times and the same issue keeps happening. I posted on the forum and one other person related that he had the same issue, but to this date neither of us have been able to correct it. I love my laser jet when it works, but have resorted to using my hp photosmart 7960 instead (higher cost of ink!). And this sucks because sometimes I have 50-100 page documents that I need to print. Laser is so much faster. Thanks in advance for the expert advice I know you are going to give me and the solution that I KNOW that you must have.
Stephanie Iseri

Hi, try unchecking the Enable bidirectional support found in the 1022nw Printer properties/Ports.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Unable to print multiple copies of documents on Win7 machine with Office 2010

Since upgrading to Windows 7, I have been unable to print multiple copies of documents in any MS Office 2007, 2010, Word Pad or Adobe Reader 9. I also experience the same problem if I print from Word Pad. The issue appears to be associated with the Collate Option in the Print Dialog box. If the Collate box is checked, I only get one copy of the document. If I uncheck the Collate box I get as many copies as I choose. The problem is that with the Collate box unchecked, I have to collate multiple copies by hand, and with 10 – 20 copies of multi-page documents that can be quite a chore.
The ironic thing is that MS Visio 2003, on the same machine, prints and collates as many copies as I choose, with the Collate box checked.
I can print multiple copies of Word 2003 documents from my wife’s Win XP machine to the same printer, but not from my Win 7 machine with Office 2010.
My printer is an HP LaserJet 1320nw and I have downloaded and installed the latest printer drivers from the HP Web site.
Has anyone experienced this problem, and if so, are you aware of a solution other than unchecking the Collate box?

I have the same issues with my LJ1320. I have Office 2010 and Windows 7 Ultimate 64 bit. However, my printing problem is more widespread since I have been unsuccessful at printing multiple copies of all types of documents, not just from Office 2010. For example, I have the same problem trying to print multiple copies from Internet Explorer.
I also have other problems printing from Office 2010 that you may not have discovered yet. I cannot print Excel spreadsheet grid lines from Office 2010 if those documents were originally created in an earlier version of Office. I tried saving them as Office 2010 documents and also using compatibility mode but nothing worked. These same documents print fine on the same printer from my laptop which uses Windows Vista and Office 2007. Also Excel spreadsheets originated in Office 2010 print nicely.
Looks like HP has a few bugs in their printer drivers.
I note that HP released a new Universal Print Driver for Windows PCL5x64 on Feb 18, 2011 (Version 5.2.6). Have you tried it yet?

Unable to print multiple copies of PDF using reader X with new Windows 7 computer

I recently upgraded to a new Windows 7 computer. Now when I try to print a PDF I can only print one copy. I have checked that my Mopier Mode is enabled and have tried everything I can think of. Why could I print multiple copies with Windows XP but can't with Windows 7?

How does that manifest itself:
you cannot change the number of copies on the Print panel?
you can change the number of copies, but it prints only one?

Laserjet 1020 Won't Print Multiple Copies

I have a Laserjet 1020. OS is Windows 7, 64x. If I give a command to print any document multiple times, it will only print it once. So, if the document is 1 page and I need 5 copies, it will print that one page one time. If the document is 4 pages and I need 5 copies, it will print the four pages of the document, but only once. So, the issue is with multiple *copies*, not multiple *pages*. I have tried the simple stuff (turning the computer on and off; checking for updates; removing the printer and completely reinstalling it; etc.). Nothing works. I did see elsewhere somebody say that if you go to start; devices/printers; right click printer; and hit DEVICE SETTINGS tab, then you can change this "MOPIER" mode thing. But that is the problem... THERE IS NO DEVICE SETTINGS TAB. No, I am not crazy. It isn't there. So, the problem with that fix, which appeared to work for others in the HP Forum, won't work for me because there is NO DEVICE SETTINGS TAB. So... How do I fix this? Why don't I have a device settings tab? Help! :-)

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet won't print multiple copies on Windows 8

No matter how many print copies I request, it only prints one at a time. Using Word 2010. I'm running Windows 8.1 and the printer is a 1320 PCL5.
This question was solved.
View Solution.

The START Button returns with Windows 8.1; Classic Shell for Windows 8; and
future Windows 10.
METRO interface -- go to Settings for Printers.
Device and Printers is correct area for setup/changes.
The ABS PDF Driver v400 is not a Physical Hardware printer, it is the ability for you to convert a MS Word document by "printing" to an Adobe PDF file.
Under Devices and Printers, you should see an HP Printer (1320) Icon/Image OR
the HP Universal PCL Driver (Icon/Image) for HP Printers.
====
HP Advisory.
NOTE: The PCL6 print driver has continued to experience some difficulties printing multiple copies from accounting applications to the HP LaserJet 1320 series printer after enabling advanced printing features.
Printing with the HP postscript (PS) emulation print driver and enabling the advanced printing features has resolved this issue in these cases.

Problem with 4250dtn printing multiple copies Windows 7 64 bit

We can't print multiple copies from within some, but not all, applications to a Laserjet 4250dtn from Windows 7 64-bit workstaitons. Windows 7 32-bit ones work fine. The printer is served from a Server 2003 printer queue, but even when we print direclty to the port we only get one copy. Setting copy count from the printer dialog works fine, but we need to have the applications invoke multiple copies. We are using the UPD 64-bit driver; could not find a legacy driver for this printer for Win 7 64 bit. I've tried various tricks found elsewhere on this forum, including turning off mopier mode, printing directly to the printer, disabling advanced features, etc. to no avail. Help, anyone! Thanks. Jerry TurnbowUSBO

Thanks very much for the feedback. I was getting worried!
The command window opens when I double-click on the Developer Day VM and I get a few lines that scroll off the window about loading Linux .... These lines never come back and I can't scroll in the command window.
As soon as the above messages come into the command window the whole process stops. The window stays open but I get no response from it. I get no login prompt or anything.
Do you think it could be a VirtualBox setup issue? I downloaded and installed the product along with the extension pack with no apparent problems and when I start VirtualBox I see the Developer Day VM listed in the left panel. All I do at that point is double-click it like the download web site said but I don't get the same results, i.e. no chance to login. It seems all I can do at that point is close the window by clicking the 'X' and it asks me 3 things about what to do with the VM and I usually say to shut it down. None of the other options look any better either.
Any other suggestions are most welcome!!
Thanks again!
-gary

Can't get photoshop elements 12 to print multiple copies of an image with one print job? what to do?

Can't get photoshop elements 12 to print multiple copies of an image with one print job

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

How to print multiple copies of same image (with specific fixed dimensions) on single page

I am using Photoshop Elements 10 on Win 7 PC. I am trying to print multiple copies of one image on a single 8.5x11 sheet of paper? The images are artwork for buttons (to be used in button-making machine) so the dimensions must be exact on the duplicated images. When I select Picture Package, the images are resized to fit the dimensions in the picture package. When I select Contact Sheet, the images are resized to fit the number of columns I selected. Neither is acceptable. How can I repeat the same image on a single piece of paper without having the system re-size the image? I know that I can manually create a new PSE file and manually insert the images into this file. This is what I have been doing as a work-around. But I would hope there is a better/faster way.
Thank-you!

A variation of hatstead's method where the pictures are precisely aligned:
1. Add the picture to the blank file as hatstead described. Use the Move tool to position the picture in the upper left corner.
2. Duplicate the layer. Use the arrow keys (NOT the mouse) to move the new layer to the right.
3. Repeat step 2 until the row is filled:
4. Merge Down the 3 layers into one. Alternatively, link the 3 layers and do a Merge Linked as in this example. The end result is the pictures in the row are on one layer:
5. Duplicate the layer and use the arrow keys to move this down to the 2nd row.
6. Repeat step 5 to create additional rows.
7. Finally, to center the whole thing on the sheet, link all the row layers and position with the arrow keys.
Note that you can also custom-make your own Picture Package. Instructions for this should be somewhere in Help.

Laserjet 4000n keeps printing (multiple) copies of first page

My LaserJet 4000n model C4118A serial no. nlqwo15293 manufactered Feb 16 1999 is conected to home LAN (bt Home Hub 5)
If I print a copy of the menu map using the buttons on the control panel I get muliple copies.
If I try to print 1 copy of a 2 page document I get multiple copies of the first page
I'm running Windows Vista Home Premium
Suggestions please
is the printer unrepairable?

Hi!
Thanks for the reply. I changed the settings of the printer to 'Pass Copies as Separate Output Request(in SAP System)' and re-tried printing 5 copies of the BOL and it again seems to print the first page 5 sides then Terms and conditions on 5 sides, then again 5 sides of page 2 and followed by 5 sides of T&C.
My settings on the smartforms is front page "D' and the back and the Last page is blank setting. This runs well when I just have to print one copy of my BOL , it prints the front page and then T&C on its back side , then again the second page and T&C on its back . This only messes when its more than one copy of the set of BOL.
Please suggest as to what to do next to make it print in proper sets.
Thanks and Regards
Aarav

Issue with printing multiple copies.

This is kind of difficult to explain. If I print, for instance, a 1 page document and enter in 500 copies, Acrobat will process page 1 500 times, and I will recieve a print job that is 500 pages long at my print server.
How do I fix it so that it would only print page 1 one time with an attribute to print it 500 times?
I have this issue with three different printers, and Acrobat seems to be the only program with this issue. Other Adobe programs, notably InDesign, and all MS Office programs work correctly. The issue only seems to happen with Acrobat.
I'm using Acrobat Professional 8.2.2
Thanks for any help.

Hello Terry. We had the same problems with our Canon printers that use the Fiery print controller. After blaming Adobe for the problem EFI, the makers of the Fiery, released a patch and updated driver that resolved this orientation problem. So I suggest you contact your Xerox support to see if they have these same fixes for your model of Fiery. Or you could check the EFI web site for any updates.
PaHu

Laserjet 4000 runs words/characters together when printing.

What causes my Laserjet 4000 to run words together and overlaps characters. The same document prints fine on a Laserjet 4100.

Thanks everyone for their input. As far as the memory shortage, I'm pretty sure that's not the problem. I can create a document in Pagemaker of only 200KB that prints fine and the convert the same document to ID and it fails to print.
I think Dov is right about the 4000 because I remember when the printer was new, there were some incompatibility issues with Pagemaker that I had to work around. The Adobe people told me back then that Pagemaker and HP postscript printers didn't get along very well.
I'll check with HP again (I've already written to them twice with no response) and see if the firmware upgrade Dov mentioned is still available, however, even though this 4000 has been very durable and a real workhorse for me, it may be time to put it out to pasture and invest in a new Postscript laserjet.
Any recommendations?
Thanks again for everyone's help.

I got a new acer pc with Win7 64-bit and itunes download won't open, it says 'This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid win'

I've tried to download Itunes and itunes for 64-bit using mozilla firefox and internet explorer, even deleted the browsing history and closed and tried to dowload again and tried download quicktime separately, but nothing seems to work.

Try right clicking on the installer and select run as administrator.

HP Laserjet 1022nw running with Win7 64 computer printing multiple copies - won't stop

Similar Messages

Maybe you are looking for