HP Laserjet 1100 in Windows 8 64b

Hi, 
yesterday I bought a new PC. The OS is windows 8 Pro 64bit. I've only made sure this PC has LPT port and checked this page https://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Type=Hardwar...
As you can see MS says this printer is compatible so I was convinced and bought this PC. When I plugged my printer and tested  printing it worked fine but scanner does not seem to work. I found out that there's utility in windows (fax and scanner) so I've tried that but it says that no scanner is connected. What am I supposed to do? I need to use it and I can't go back to windows xp. 
Thanks for help

Hi,
Firstly I'd like to clarify: I'm not working for any hardware or software vendor. Your printer had been working perfectly for few years or even decades and now it won't do anything or only few things because of a new Operating system. Microsoft, Apple will never say "Warning: Using this new product, your existing hardware may NOT work at all". They only say their new products will blah blah ....They promise everything then put all the unhappiness, blames to hardware vendors. I believe developing new products is much cheaper than supporting older products and each product must have a life cycle, it must die loudly or quietly and the Operating systems will kill our hardware quicker. Many people just upgrade for a sake of the "bleeding edge", never know and/or research what the existing investments at home will work or not.
Just my 2 cents and good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Can a custom page size be set on a LaserJet 1100?

    Can a custom page size be set on a LaserJet 1100? Windows XP

    Hi,
    Based on this information, YES :
    Paper: A4, Letter, Legal, and custom paper sizes. Envelope: Executive, B5, C5, DL, Monarch, Com-10, and custom envelope sizes.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Laserjet 1100 drivers for win 7 pro 64bit

    need drivers for the above
    details
    Laserjet 1100 mono
    model" s4224a
    sggjo25836
    these are the only details on the sticker on the back of the printer..
    It does NOT have product number.
    comes up wth this error
    Error: This product number is not associated with the serial number provided. Please review your records and make any necessary edits.
    Have tried upper & lower case with the same result.
    Help please!

    Hi,
    The drivers for your printer are already included within Windows Update.
    Follow these steps to install the printer on a Windows 7 PC:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • [SOLVED] Can't get CUPS to add / detect HP Laserjet 1100 printer

    I moved my computer downstairs... after a few weeks I decided to move my printer down and set it up. I had it working perfectly a few weeks ago before the move... however now I can't get CUPS to detect or add my printer. At first when I moved my printer downstairs the CUPS web interface had my previous setup still there and had my printer detected / added. However, printing jobs would just stay in the queue and never print. I did some googling and someone mention to remove the printer and re-add it. Well I tried to to that and got stuck on trying to re-add it. CUPS will not identify my printer now. Funny thing is I just now remember I had a similiar issue a few months back and I remembered now I fixed the queue issue just by unplugging the power to my printer and leaving it off for 5min then replugging it in. I have tried all the steps on the wiki and I can't seem to figure this one out. dmesg does output that it is detecting my printer. I have my printer hooked up via a mini parralel to USB cord. If you have any other questions for me please shoot
    Unplugging and repluggin my printer gives me this msg in dmesg:
    usblp0: removed
    usb 6-2: new full speed USB device using uhci_hcd and address 4
    usb 6-2: configuration #1 chosen from 1 choice
    usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x4348 pid 0x5584
    hp-toolbox also does not detect any printers. I have tried restarting cupsd... Any help is appreciated... I need to get printing up ASAP since school has started.
    lsusb output this amongst other things:
    Bus 006 Device 004: ID 4348:5584 WinChipHead CH34x printer adapter cable
    If it matters I am using XFCE as my DE... I also do not remember using the CUPS interface to intially add the printer... I do not exactly remember how I did it... but the web interface looked completely new to me and I am rather sure that is not how I initially went about doing it... perhaps I used some GUI frontend for it...
    EDIT: After reading the forum descriptions closer... perhaps this should be moved to the Workstation section.
    Last edited by ugkbunb (2009-09-07 20:11:27)

    skottish wrote:I'm curious why you're using gutenprint drivers for a HP printer. hplip provides everything needed for HP printers.
    Tell you the truth... I have no idea how to change it or what not... I didn't even add that manually... just rebooted my computer one day and it appeared there.
    hpsetup does not detect my printer
    system-config-printer gives me an error when I try and add a printer. I manually specify the location to file:/dev/usb/lp0 ... I scroll down find HP LaserJet 1100 and the recommended driver is hpjis 3.9.8. I select that and I get the following:
    There was an error during the CUPS operation: 'client-error-not-possible'
    EDIT: I am about ready to chunk to this printer out the window... I have been messing with this for about a week now and I just keep getting two steps forward and then three steps backwards.
    The system-config-printer dialog looked familiar and I believe that when I intially was able to set up my printer and had it working upstairs I used that dialog to add my printer.
    Some googling brought me to this ubuntu bug report
    Your USB-to-parallel adapter does not pass through the printer ID. The device is recognized as printer, but there is no information about manufacturer and model. Therefore system-config-printer and hal-cups-utils automatically assign the text-only printer to the unknown device.
    In general you have to run system-config-printer and manually choose manufacturer and model.
    That you cannot print at all is a bug of the "hal" CUPS backend. See
    https://fedorahosted.org/hal-cups-utils/ticket/5
    Try to do the following:
    cupsctl FileDevice=yes
    lpadmin -p <your print queue name> -E -v file:/dev/usb/lp0
    This is an ugly workaround which works if you have only one printer (the one with the adapter cable) on USB. Does it work for you?
    Now the problem is that I can not add my printer via the system-config-printer. However, if I go the CUPS web interface and hit manage printers the driver is listed as the following:
    Driver:    Local Raw Printer (grayscale)
    Now I think that is my issue... I need to have it set to the correct driver... if I hit modify printer and select my Make/Model I get the following access error:
    401 Unauthorized
    Enter your username and password or the root username and password to access this page. If you are using Kerberos authentication, make sure you have a valid Kerberos ticket.
    However there is no prompt or I do not know where to enter this information to.
    Last edited by ugkbunb (2009-09-07 19:06:48)

  • How to define the HP LaserJet 1100 Series(SHARP AR-M550U )?

    Hi,
    Once the SHARP AR-M550U got plugged to my HP laptop on which Windows 7 Home 64BIT is installed, this screen shot showed me.
    I have checked for drivers using Windows Update. But it didn't find any. As this screen shot below.
    I don't have the drivers  disc which came from manufacture.
    This is hardware ID for SHARP AR-M5501UB104
    I have googled for USBPRINT\SHARP AR-M5501UB104, but no results showed.
    Also, What new featuers are there in HP LaserJet 1100 Series(SHARP AR-M550U ) different from other HP LaserJet P2015 PCL6 and HP laserJEt Professional P1102?

    could anyone please reply to me  since I am in an urgent  need for using this this  photocopier.
    By entering my Enter product name/number, which is SHARP AR-M550U and pressing 'serach', these results found:
    Product search resultsSoftware & driver downloads
    Results for "sharp ar-m550u" (22 products)
    HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
    HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
    HP Pavilion t500 Desktop PC series
    HP Pavilion t550m Desktop PC
    HP SFP and Mini-GBIC BX10-U Transceivers
    HP X115 100M SFP LC BX 10-U Transceiver
    HP SFP and Mini-GBIC SX Transceivers
    HP X126 1Gb/s SFP LC SX MM 550m 850nm Transceiver
    HP Networking Switch Redundant Power Cords
    HP X290 500 U 1m RPS Cable
    Micron M550 256GB mSATA-3 Solid State Drive
    Micron M550 256GB mSATA-3 Solid State Drive
    HP Tape Drive SAS Cables
    HP 1U SAS Ext-Min 1x-4m Cable Assembly Kit
    HP 1U SAS TP I-E 3HDDs X 1Tape Drive X4M Server Cable Assembly Kit
    HP SFP and Mini-GBIC BX-U Transceivers
    HP 114 100M SFP LC BX-U Transceiver
    HP X112 100M SFP LC BX-U Transceiver
    HP 3PAR Drive Chassis
    HP M6710 2.5 inch 2U SAS Drive Enclosure
    HP M6720 3.5 inch 4U SAS Drive Enclosure
    HP SecPath Licenses
    HP SecPath U200-M 1 Year Anti-spam Service License
    HP SecPath U200-M 1 Year Anti-virus Update License
    HP SecPath U200-M 1 Year IPS Update License
    HP SecPath U200-M 1 Year Web Content Filter Service License
    HP StoreFabric Premier Flex OM4 Cables
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 4M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 6M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 10M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 25M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 50M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 100M Cable
    I am quite confused which ones should be installed to define the SHARP AR-M550U on my HP laptop on which Windows 7 64bit is installed.

  • HP Laserjet 1100

    I send a document to the HP Laserjet 1100.  The document shows up in the Queue.  It then disappears from the queue as if it printed, but it did not print.
     If I remove the paper, or turn off the printer, and then send the document to the printer, it hangs in the queue until I turn the printer on or put the paper back in the feeder.
    It worked on Friday, last week, but would not work starting on Monday.
    Also, I can print a test page from the printer self-test, but not from the printer properties in Windows 7.

    How do you have it connected, USB adapter or parallel port?
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • LaserJet 1100 won't print in WordPerfect X4 unless manual button is pressed for each page.

    Hi - I'm using a Toshiba Satellite - Windows Vista 64 bit operating system.  When using WordPerfect X4, I can't get my HP LaserJet 1100 to print unless I manually push the button for each page.  I have no problems getting it to print automatically in Word or with .pdf documents.  Something is not compatible with WordPerfect.  It was printing fine to begin with, but once I printed an older version of Avery labels, it seemed to trigger this need to have to manually press the big button.  Help!

    Does the ext directory have the php_oci8.dll? In the original steps the PHP dir is renamed. In the given php.in the extension_dir looks like it has been updated correctly. Since PHP distributes php_oci8.dll by default I reckon there would be a very good chance that the problem was somewhere else. Since this is an old thread I don't think we'll get much value from speculation.
    -- cj

  • Driver HP lazerjet 1100 for windows 7 64 bits

    How can I find the driver for the HP lazerjet 1100, connected to PC by usb (using a IEEE 1284 controller) windows 7 home edition 64 bits.
    Thank you for helping me.
    This question was solved.
    View Solution.

    There is no original drivers found for HP Laserjet 1100 on HP website support but you can find it on Windows 7, please refers to here for more info

  • Barcode printing issues with Laserjet 1100 8.1 driver

    Hi All,
    I've ran into issues printing coupons to my Laserjet 1100 printer using Windows 8.1. This worked with no issues (and still does) in Windows 8. Looking at the driver versions, it appears that something was updated form 8 to 8.1.It seems this issue is related
    to printing any barcodes. Has anyone else encounters this? Is there any way I can use the Windows 8 driver instead?

    For anyone interested, the way I was able to fix this issue is with the
    HP Universal Print Driver for Windows PCL6
    http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?sp4ts.oid=4157320&ac.admitted=1399039456352.876444892.199480143
    I selected Windows 8.1 x64, then downloaded the PCL5 driver and now the barcodes work.

  • Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

    Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
    I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it ​​worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
    Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
    Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

    привет Roman,
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.
    Mac OS X: О сброса системы Печать ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 инструкции ...
    В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
    если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
    Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
    Сброс системы печати в Mac OS X 10.5.x + + +
    1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
    2. Выберите Системные настройки в меню Apple.
    3. Выбери для печати и факса в меню Вид.
    4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
    http://support.apple.com/kb/ht1341
    Перезагрузку.

  • Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

    Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner.  Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop.   I can not find the driver on the HP support list and the support list does not recognize  HP LaserJet 5p.   
    Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

    Hi,
    Basic print drivers are available for the HP Laerjet 5P via Windows Update.
    Follow these steps to install the printer drivers on Windows 8.1:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Color LaserJet 1500L add windows 8.1

    I can't find the driver for my printer (HP Color LaserJet 1500L) for windows 8.1.

    Hi,
    I afraid a such is not available, the printer is not compatible with Windows 8.1:
    http://h71016.www7.hp.com/dstore/MiddleFrame.asp?page=config&ProductLineId=565&FamilyId=3294&BaseID=...
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Drivers for HP Laserjet 4000t in Windows 7

    I need Drivers for HP Laserjet 4000t in Windows 7.  Do they exist? Where do I get them? I hate to lose my reliable old printer

    Hi:
    Try the W7 32 bit drivers and software from the HP Probook 450 G2.
    Your model uses the Intel HD graphics driver.
    http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053

  • Drivers for hp laserjet 1200 for windows 7 64 bit

    Nothing seems to work to get printer working.

    Hey @Jskol ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    I understand you are having some issue making your HP Laserjet 1200 on windows 7 64 bit work.
    Can you please elaborate on what it is that you are experiencing so that I am able to assist you properly? Is it new and not connecting right? Has it lost communication and is now not working? How is it connected to the computer?
    Have a great day and a wonderful new year. Get back to me.
    I worked for HP.

  • What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

    Hi,
    just found your post...
    To install your HP1010 on Win7do the following:
    Start
    Devices & Printers
    Add a printer
    Adda local printer
    Use an existing port: DOT4_001 (Generic IEEE...)
    Next
    Pick HP from manufacturer
    Select HP LaserJet 3055 PCL5
    Next
    Name the printer something to your liking
    Finish (or so, just follow the prompts)
    Here you are!
    Works every time for me, never had a problem from any application.
    I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message.  Be with me...
    Matt

Maybe you are looking for