HP LaserJet 1150 NOT collating / un-colatting

YES, I have posed this question to HP Printer Support, but I think the problem is actually in OS X -- as HP and Apple have worked extensively to include all of the HP drivers, etc. into OS X.
Our used HP LaserJet 1150 (black only) printer does not colate/un-colate the pages it produces.
The pages come out onto the front bin, face down - with LAST page of document printed FIRST. This requires hand collating the output.
What is needed is for the FIRST page of the document to be printed FIRST, and as the sheets come out face down, NO hand collating would thence is required.
Note that the PRINT Dialogue Box (part of OS X) is what determines the order of printing of the pages of a document.
Any help would be appreciated.
Samuel

Well, if it's not on your install...
Custom installs in Mac OS X 10.4
http://docs.info.apple.com/article.html?artnum=301229
Here's a complete list of all the custom Printer installation options available with Optional Installs.mpkg:
* Print Drivers
o Brother Printer Drivers
o Canon Printer Drivers
o Electronics For Imaging Printer Drivers
o Epson Printer Drivers
o Hewlett-Packard Printer Drivers
o Lexmark Printer Drivers
o Gimp Printer Drivers
o Ricoh Printer Drivers
o Xerox Printer Drivers
Or hp laserjet 1150 dot4 5.0.5.0...
http://mac.wareseeker.com/free-hp-laserjet-1150-dot4-5.0.5.0/

Similar Messages

Can't get driver to work for HP Laserjet 1150 and Windows 7 laptop

windows 7 64 bit PS driver for Laserjet 1150 is looking for .inf file. Not in driver folder. won't connect to printer.
Help

For the 1415 you need to download an application that runs on your computer and then installs the new firmware in the printer. You can find that firmware program here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=4089468&
I hope this helps.

Firmware for HP LaserJet 1150

Requires the firmware for HP LaserJet 1150 to set the Zyxel keenetic Giga. Where can I download it?

After reading the website that you linked me to, I found that this is a company website and they tested these printers with their product and are suggesting a USB connection.
This printer did not have any firmware available for download.
The product page for the Laserjet 1150 is located here and you can find drivers under the appropriate OS.
Laserjet 1150
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP laserjet printer not working

HP laserjet printer not working

Greetings,
Can you please tell me what model Laserjet you are working with?
Also, how are you trying to connect with this laserjet, USB or Wifi?

HP LaserJet 3015 not printing with 10.5.6

I just upgraded from 10.5.5 to 10.5.6 and my HP Laserjet does not print. I removed it and added it back but when I try to print it always gives me the following error when the printer queue is trying to connect:
Printer busy (status:0xe00002e9)
Please help.
HGCali

<Is this because i just upgraded to 10.5.6? </i>
No, probably not. I have no problems printing to my 3015 from 10.5.6.
Is apple going to do something about this?
Doubtful since it's almost certainly not Apple's problem, per se. Make sure you have the latest printer update, HP Printer Update 1.1.1, which should appear in Software Update if you haven't installed it and will probably appear in the "Installed Updates" pane of the Software Update preference. And if course if it's a networked printer you'll want to ping it to make sure that your system is actually reaching the printer.
If you continue to have problems, you'll probably want to take it up with your IT people or with HP. But you can keep an eye on this thread and see if suggestions to the OP would apply in your case as well.

Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment. after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page. the text is straight across left to right then starts to waver and then then stops altogether. i tried a different black toner cartidge and the problem remains.

> so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black. Ok its not the controller. > Still prints all black. Ok its not the fuser. > its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there? Formatter board hasnt been mentioned. Something is sending a command to the printer that is telling it to open up the doors and charge the entire page. Normally the laser is responsible for charging the media. As the media passes over the toner doors it atracts toner particles. Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe? Perhaps but not likely. If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer. http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors. Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.

How to run Hp laserjet 1150 on win 8 x 64 bits

i just change to win 8 x64bits and i can't use my printer , can anyone help me ?

Hi,
The Laserjet 1150 is supported on Windows 8, the drivers are available via Windows Update as listed below:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?spf_p.tpst=kbDocDispl...
You may also need to install the DOT4 USB drivers below if you experience any issues adding the printer:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=238318&spf...
As you may find by the following list, the printer is comaptible:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=2...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

Reader 11.0.4 will not collate pages when printing. Using OS X 10.6.8

I'm not 100% sure, but I believe you need Acrobat Pro for that.

Not Collated Printing

Hi all,
When i have a single paged layout and when the data from for instance an invoice is more than 1 page, than the layout does everything allright and continues on the next pages.
But when I want to print it twice or more and I uncheck the checkbox "collate" (so I get all de first pages first and then all the second pages etc) than the the package is still printed collated.
Example: I have am invoice that is 3 pages long and i want to print it twice.
Collated printing
The package consists of 1,2,3 and than again 1,2,3
NOT collated printing
Normally: 1,1,2,2,3,3
SBO does: 1,2,3,1,2,3
So, SBO doesn't print not-collated (also not when the printer is said to do it). SBO keeps sending packages of 1 layout at the time. So in the example: SBO sends twice 1,2,3 in separate printjobs.
Can anybody help me so I can print NOT collated with an PLD-layout?
Thank you in advance!
Greetz
Lars

hi pelzer,
How do you print the document ?
1. After Print Preview,then Print.
2. Using document printing,then print.
Jeyakanthan

HP laserJet P1006 not working on Windows 10. Please help

HP laserJet P1006 not working on Windows 10. Please help

Hi,
Try installing the windows 8.1 drivers from HP's support site, those are more likely to work.
For any issues clarify your OS version, is it 32 or 64 bit?

HP Laserjet 2100M not on printer list

I have a HP Laserjet 2100M and have been trying to get it to work with my Macbook, freshly running Snow Leopard 10.6.2. The printer worked fine with OS 10.4.11 before I added Snow Leopard (it was a clean install, I had a HD failure and started out with a new HD). The 2100M is listed as one of the printers supported by HP printer driver package 2.3. I downloaded this package. However, when I pull up the Add Printer box, no HP printers are offered. If I go to the Print & Fax queue, the only two printers listed are the ones I have successfully added previously (an HP 3900 & Epson R1800). No other HP printers are offered. Based on what I am reading in previous forum questions, it sounds like the HP 2100M, although getting dated, should still work with OS 10.6. The printer is in excellent condition and I would really like to continue using it if at all possible. What am I doing wrong or what can I do to access the available drivers in HP printer driver package? Although the installation was slow (the last element takes 2-3 minutes), my computer said that it was installed successfully.
The printer is connected by ethernet. I should note, since I generally don't know a lot about these things, I did try to reinstall the earlier driver before I understood I did not need to do this. I don't know if that earlier attempt messed something up or not.

I emptied the HP folder in the library (as the next respondent suggested) and reloaded the driver package. That did not do it. Another Forum discussion I located in December seemed to indicate that the IP number might be necessary but I was trying to avoid that. I have made some efforts to locate the IP address for the printer without luck. Any ideas how I can acquire it? I have printed the test page and the 2nd test page (pressing go and cancel buttons at the same time) but no obvious IP number appears. There are PCL, PCLXL, and PS numbers listed under Installed Personalities and Options. I thought these might represent IP numbers but the format is different (19980828 under PS for example). This could be written 199.8.0.828 which looks more like an IP format but as soon as I get the 199 down (at least using the PS number), the computer tells me this is an invalid HP IP combination and that I am using third party software and it should not be. I have only used HP software. My suspicion is that the IP number is not on this page.
Another possibility: I noticed that in the HP Printer folder (within the Library folder) that the Laserjet folder only has a file titled hplastjetzjs.bundle in it. Is this file supposed to be expanded?

HP Laserjet 6L not `seen'

H/W: Mini, HP Laserjet 6L, iogear serial/usb adapter.
S/W: iogear drivers, Apple HP drivers.
I plugged in the adapter, it's power light came on. loaded the adapter drivers.
Loaded the fresh from a Apple download HP drivers.
Made sure that the printer was on. To Add Printer, nothing.
I uninstalled the Apple drivers, reinstalled, same thing, nothing.
Called iogear, they haven't gotten back to me.
Called Applecare,
`go to the HP site and get drivers, No, well it must be your adapter or an HP issue, have a good day, click' . Even though Apple has the driver listed for my 6L.
Anybody been through this issue? I do not want to trash a $500 printer.

I think you will find it very hard to get good support from the vendors for this combination of HP/IoGear/Apple hardware and software - especially when the printer is so old.
While the printer may have cost $500 when it was new, I personally would just replace it with a new Brother laser printer with a usb and/or network interface, which often sells on special for $50 to $75. And Brother provides excellent driver support for Macs.
I use an old HP Laserjet 3200 Multifunction machine with my Mini, but it at least has a usb interface. There continue to be print drivers for it, though no scanner support. At some point, though, you have to start depreciating older hardware, even if it is not broken, because the support is just not going to be there.
If you are determined to get this combination work, you may have to explore the Gutenprint drivers -- if there are any -- for your HP.
http://gutenprint.sourceforge.net/pSupportedPrinters.php

HP LaserJet 1010 not recognized by Windows 7 (64-bit)

My HP LaserJet 1010 (USB-printer) is not automatically recognized by Windows 7 (64-bit). I am unable to install the printer manually. I did locate a Vista 64-bit driver for this printer on the HP-website, but I don't understand how I could use the inf-file. I can't find a way to tell Win7 where to look...

Working solution on win 7 32 & 64 with driver lj1010serieshb-vista, did as follow:
connected printer, windows tried to auto install and failed, device was listed as unspecified.
googled for lj1010serieshb-vista(32/64).zip driver, downloaded from hp website, unzipped and extracted files.
Start > Run > PrintManagement.msc , then Print Servers > Localhost , right click on drivers > add driver > next > choose x86/x64 > next > have disk > browse to location of extracted
files, select hpc1015e.inf > ok > select hp laserjet 1010 hb > next > finish
Repeat above process and this time select select hp laserjet 1015 hb > next > finish , this step is needed as stated on previous post some files are missing on the 1010 driver and adding 1015 fixes the problem.
Now back to Devices and printers , right click on the unspecified device > troubleshoot > then will ask to search for driver, select "apply this fix" , it will find and install the correct driver from previous step > then will ask to set printer
as default, select "apply this fix" > then will ask if you want to share printer, select "skip this fix" if you don't want to share > close troubleshooter.
Now i have perfectly working printer, 'preferences' is working and not crashing win explorer and printer doesn't hung.
I guess you could first add the two drivers to your system before
connecting your printer and it would install perfectly but who would though this old printer would not work trough windows update.
thanks to the people who went by trial and error to find a working solution.

HP Color LaserJet 3600(not 3600n) with Fast Ethernet port - can I use it?

Hello! There is a HP Color LaserJet 3600 in our company connected via USB with XP-based PC. Recently I decided that we need this printer be shared directly trough our ethernet network, so I started to learn manuals - its own manual, Jet Direct, and all that stuff. The printer's manual says that HP Color Laserjet 3600 does not have neither its own ethernet port, nor support for embedded print-server like JetDirect 620n.
But!
Visual check shows that this HP 3600 DOES have its own ethernet port and if I connect it to network or at least to a notebook - it blinks like any other ethernet port with "lights" should do.
However.
Neither front panel, nor back panel says anything about network support(like letter "n" in model name).
Configuration page print also does not know about that mysterious port.
So my questions are:
1. What is this port actually?
2. Can I use it to share printer over network? Maybe, there is a way to upload 3600n's firmware somehow?

The product you have seems to be a commercial printer. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
You can also find the article pertaining to this product here:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesI...
(contains basic troubleshooting info, manuals, drivers, etc)
Hope this helps!
Help the community by marking this post as a solution if it solved your issue!.
If my post helped you in any way, please click the blue KUDOS star under my name! It would mean a great deal.

HP Laserjet 5M not working under 10.8.5

This is the official guidance for Laserjet printer capability in Mountain Lion 10.8...
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613
HP LaserJet 5, 5L, 5N, 5P, 5se, and 5si Printer series
NOTE: While most of the LaserJet 5 series products are not supported, the LaserJet 5m, 5mp, and 5si mx printers ARE supported.
I have a Laserjet 5M that is connected by ethernet cable direct to my iMac. It has TCP/IP enabled and the self test shows that it has JetDirect J2552A and an IP address of 192.0.0.192. My System preferences Network panel recognises when the printer is on or off and allocates an IP in the format of 169.111.111.111.
I have tried numerous methods to re-establish connection to this printer, including using the Jetdirect connection method and selecting different drivers.
The printer has worked and connected reliably since 1996 under Mac OS 7, 8, 9, 10, 10.3, 10.4, 10.5.8, 10.6 ... but not in 10.8
Yes, it's an old printer, but it is a reliable workhorse and perfectly capable of printing if 10.8 continues to support it, as HP says it should.
HP says it is supported - please can someone explain how to add it to my printer list and get printing again

Thank you PAHU
I can change the settings in my network panel but there isn't the option to specify manual IP on the printer menu options. I have tried resetting I/O and have also tried switching BOOTP off. I also tried connecting it via ethernet to the broadband router (instead of direct cable from the iMac) but that didn't give it an IP. I can read the IP settings for the printer by printing out the self test pages. If I set them both to 192.0.0.192 it results in an error with ARP Duplicate IP address.
Just to clarify, this printer has the standard ethernet card installed.
When I connect via the broadband router (located in another room) it uses a standard ethernet cat 5 cable. When I connect direct to iMac I'm using a special ethernet cat 5 cable which uses crossover rather than straight-through connections. http://digital.ni.com/public.nsf/allkb/34C3163EFAC9F30E86256B8F0060AD0C
The iMac detects when the printer is on.
The printer detects when the IP address setting on the ethernet card was conflicting.
Everything was working fine under 10.5.8... it's the upgrade to 10.8.5 that broke this.
I think the think that has changed is Appletalk/Ethertalk, although the printer does support TCP/IP connections.

HP LaserJet 1150 NOT collating / un-colatting

Similar Messages

Maybe you are looking for