HP LaserJet 1200 in the network does not print in double-side mode

Hello!
I have HP LaserJet 1200, connected via USB cable to the PC (Windows XP SP3). I have connected this printer via LAN to my PowerBook G4 - and from my PowerBook G4 i cannot use doube-side mode of printing! All sheets that leave the printers are printed on one side only - the "Duplex" setting by these clients is just ignored.
I check out the option "Doube-sided printing" ("Двусторонняя печать"), but this printer prints only on one side of paper, instead of two. I tried HP drivers 1.1 and 1.1.1 and even "CUPS+Gutenprint v5.2.0 beta 4" drivers. The same problem...
P.S. Excuse me for bad english

Bruce De Benedictis, what a **** you are talking about?
Manual, not hardware!, double-side printing works as follows: press Option-P, checkbox on "Double side printing" ("Двусторонняя печать" in russian), OK. Printer prints odd pages on one side and then lights the LED. Further printer waits. Then we must reload (without any flipping!!!) these pages in main tray AND THEN WE MUST PRESS THIS GREEN LIGHTING LED on the printer! Furthermore, our great HP LaserJet 1200 will prints the other even-numbered pages!
It works very well in our LAN - from all XP/Vista PC's, when we print on this XP-connected HP LaserJet 1200 - everything is fine. But not from Mac.
But when we print from Mac on this XP-connected printer - double-side option is totally ignored. Printer just prints immediately all pages on one side without any pause, lighting LEDs, etc...

Similar Messages

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

it is a windows 8

HT1349 before i do updates for my iphone(to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becous the SIM must be opened. when i try to open it , the networks does not appear (no se

before i do updates for my iphone (to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becouse the SIM must be opened. when i try to open it , the networks does not appear (no service).

Its a serious problem and many people are facing the same issue on both locked and factory unlocked phones.
I wonder when Apple will address to this issue. After all it is losing all its reputation!
See this thread, many users are encountering the same issue:
https://discussions.apple.com/thread/3425746?start=75&tstart=0
I believe its a software issue and could be solved asap Apple fixes it!

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Hp laserjet 100 color mfp m175 does not print from network nor via usb cable

My hp laserjet 100 color mfp m175 just stopped printing last week. I have tried everything recommended but nothing works. I have re-install it both on wireless network and usb connection = nothing works. It prints all internal reports but nothing from any computer. I have 3 computers which I have tried to print from. It even does not print the test page. Please dont recommend to update drivers etc. as I have spend 2 whole days on this and nothing works!

Hi @einar1854,
I see by your post that you are unable to print by a USB or Wireless connection on 3 different computers, but the printer will print the hardware self tests. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
For the USB connection, follow these steps if the there are no errors from the Print and Scan Doctor.
(once we get the printer printing this way, we can setup the wireless)
Here are steps to remove the jobs from the spool folder and restart the print spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Follow the steps in this document to get to the device manager to check for the printer entries.
How do I get into Windows Device Manager?
Then click on Identifying problems in Windows Device Manager.
In the list click on Universal Serial Bus controllers and look for USB mass storage device and USB printing support, (make sure any other printers are turned off or disconnected)
Let me know what it showed in the device manager.
Check to make sure the proper port is selected.
Go to start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
Make sure the USB has a check mark beside it, if not put the check mark there and apply the changes.
Check the print Queue.
In the Devices and Printers folder.
Right-click the name of the product and then click See what's printing .
Click the Printer button, then click Cancel All Documents if there are any documents in the queue.
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
What operating system are you using on the 3 computers? How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Print a configuration page to see also if the printer has a valid IPV4 address, so we have that information for when we setup the wireless. Printing a Configuration Report.
Provide the first 3 sets of numbers in the IPV4 address.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Laserjet Pro 200 color M251nw does not print font larger than 48 using Office WORD 2013

If a create a new Word document and I type letters of 72 font, the letters do not print. If the font size is reduced to 48 then it prints. The brand new printer is connected to my laptop via USB. I'm using an HP Laptop Pro 7420s, 32 bit with MS Office H&B 2013. Any ideas as to what should I check? Thank you.
This question was solved.
View Solution.

Hi,
Install the latest firmware for the printer, that should address this type of issues.
For a USB connection use the following tool:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-8&cc=us&dlc=en&lc=en...
For network connection follow these steps:
http://support.hp.com/us-en/product/HP-LaserJet-Pro-200-color-Printer-M251nw/5097632/model/5097639/d...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

The network does not support the requested encryption method

Prior to last night, I had connected to several wireless networks without issue, so I know my computer can do it. The issue started after I reinstalled the operating system. I connected to my friends wireless network last night with no problems, using the password. My system was having other unrelated problems so I decided to reinstall the operating system since the computer had just had a new hard drive put in anyway. Then when I tried to get online after everything was up and running, I couldn't.
Wireless networks show up fine, but when I go to log in, enter the password and hit connect, after a second I get the error message : "The network "name" does not support the requested encryption method". I've scoured the help topics, searched high and low, and tried everything. Please help
Message was edited by: Eden51086

After you reinstalled the OS, you may need to download install any Airport Updates as well.

Our HP laserjet , model P2050 , does not print on both sides even though the " auto rotate " box is

checked. Is there someway to cause the printer to print on both sides? ( There is another printer box that comes up in other instances and it has a "Preferance" box which , when clicked on, gives a different way to choose two-sided printing, and that one works to cause the printer to do as wanted.)
The box that shows " auto rotate' doesn't have a print preview.

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

How do I install a SSD drive - the Bios does not allow changing to AHCI mode

I have a Windows 7, HP ENVY approx 1.5 years old. I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID.
How does one unlock the BIOS, or change the sata settings to allow an SSD drive to be installed?

Hi:
AHCI is enabled by default on today's HP consumer notebooks.
Nothing can be done to actually see a setting, or change the setting to anything other than AHCI etc.
Paul

I am trying to print out information on a Google Maps page. I have the print setting on fit to width but the page does not print that way and some of the page that would normally show on page 2 is missing.

The page prints out fine on Internet Explorer, but not on Firefox. 2 pages are supposed to print out but only 1 prints. Also it does not fit to width even though that's the setting.

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

I have FIOS. I linked my FIOS router via ethernet cable to an Airport Extreme. I want to extend the range using an Airport Express wirelessly; however when I plug in the Express, the network does not find it.

Any help is appreciated.

Make sure the ethernet cord is plugged into the WAN port on the Aiport (the port with a circle of dots above it) and do a hard reset (hold the reset button until the light blinks rapidly.) It will not automatically appear in the Airport Utiltiy. You are looking for the airport under the wifi menu after a few minutes or in Settings>Wifi on an iOS device that you can click to join and continue to setup.

LaserJet Pro 200 color M251nw does not print from internet

I have a LaserJet Pro 200 color M251nw, set up for wireless printing. It finally works when printing from Microsoft Word 2010, but refuses to do so from the internet.
Can anyone help me?
Thanks!
SALLYANNC

Hi @SALLYANNC,
I see by your post that you are unable to print from the internet. I can help you with this.
Run the Windows updates and update your browser.
Try printing from another browser to see if you have the same results.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What internet browser are you using?
What operating system are you using?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Everytime i try to print i get a sript error message and the document does not print

i cannot print----help

Hard Reset – While printer is powered ON, pull
the power cord from the printer then from the
wall. After 30 seconds reconnect power to
wall and printer. This will trigger a ‘dirty
power up’ and restore the printer to a known
good condition (if it is possible). No user
settings are lost with a ‘hard reset’.
This ‘Hard Reset’ is one of the most powerful
tools to use when the printer hardware is not
functioning properly!
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

When in pages, the document does not print the whole page

When I go to print a document that I have in written in Pages, only a third of each page prints??? How do I fix this?

Set the Adobe PDF printer as your printer in Excel and then go through and set the print area. Excel is like WORD in that it will reflow the document to match the printer. When you print to PDF (or use PDF Maker), it will reflow first - giving the type of result you are seeing. In fact that is one issue that many OFFICE users miss. They assume that an OFFICE document can be sent out for viewing and printing by others with no problem, but many times folks have problems because they have a different printer. That is a good reason to distribute PDFs instead. Our university has several forms in WORD format that have this problem. It would be nice if they would put them into PDF format.

Airport Connection- Network does not appear in list

I've searched through the topics and haven't seen anything exactly like my issue, but some close.
I've been ignoring this mainly due to not having the time to research, but have spent all day today to no avail.
I have a D-Link DI-514 router, my iMac is connected by ethernet, my Macbook via airport, both without issue.
My iMac however will not connect via Airport, the airport is on, but the network does not show up, in-fact no network does. However my Macbook sees 6 networks (neighbors) including mine.
The router is within a few feet of the iMac, I have moved it to various locations, still no network. I have duplicated all system preferences from the Macbook to the iMac, including Network, Sharing and Security settings.
I have booted into safe mode and back, still no network.
I began to think there must be a problem with the airport card, or an interference problem, so I booted into XP and successfully connected to my network with an "Excellent" signal, so the card works and there is no interference.
I downloaded iStumbler, on both the imac and macbook, istumbler sees no networks on the iMac, the Macbook sees 6, including mine, which it sees at 72% with 8% noise.
I've done this with both an Open Network and a WEP encrypted.
Any other ideas?
Thanks
Porl

The latest update fixed this for me!
Cheers!

HP LaserJet 1200 in the network does not print in double-side mode

Similar Messages

Maybe you are looking for