HP Laserjet 1200 replaced toner & yellow light flashes

Hi! I have a HP Laserjet 1200 which printed with smudges and ghost text a few lines down. In an attempt to correct this, I installed a new toner cartridge. I had difficulty opening the toner door completely; it stuck about half-way opened. I opened the left and right panels to see if I could loosen the old cartridge, and something snapped (probably a plastic clip) when I forced the right panel open. Opening  the panels didn't help, and I closed them. Eventually, after applying some pressure, I opened the toner door all of the way and replaced the toner. Now the printer doesn't work. The yellow light just flashes. Replacing the old toner cartridge doesn't help. I still have the same blinking yellow light problem. Does anyone have any ideas on this?

I unplugged the electrical plug before (no off switch) but I guess for not long enough. Did it again and left it unplugged for awhile when I went to the store. Just plugged in and the memory has let go like you said. All's well now. Thanks.

Similar Messages

  • Rebel T3 not taking pictures, yellow light flashing, please help!

    My Rebel T3 won't take pictures.  A yellow light flashes on front, but nothing else happens.  I've tried replacing the battery, changing the mode, but it still won't take any pictures.  It was working just fine yesterday.
    Solved!
    Go to Solution.

    I actually did try that.  And this is going to sound like I'm totally stupid, but I figured out my problem. 
    Somehow I must have bumped the timer setting.  I've never used the timer before, so I didn't realize it made the yellow light flash.  And I wasn't just sitting there waiting to see if it would take a picture. 
    So anyway.... problem solved.  I feel dumb, but putting the solution here just in case anyone else has the same problem! lol

  • TS1410 My older iPod is not recognized by iTunes. A yellow light flashes.

    My older iPod is not recognized by iTunes. When plugged in a yellow light flashes. When unplugged and turned on, I see green and yellow lights flashing alternately. Help?

    The Jaguar there is nothing you can do, and the new interface from the dealer are not compatible
    For the BMW, you have to find out what brand interface was installed in the vehicle
    can be dension or original BMW  in the x5, if dension you can get something call
    Scosche passPORT if  BMW brand you can get a new cable from Bmw with the usb and dual power supply,
    In the Mini if DIce brand you will need a new cable or new iPod interface, now they have a usb plug to do updates in case iPhone 5 is release in the future or any other updates from iTunes
    http://www.oemautosound.com/pc-457-164-dice-i-bmw-t5v-mini-cooper-2002-2008-to-i pod-text-ready.aspx

  • Why is yellow light flashing on my airport express wifi

    Why is yellow light flashing on my airport exress wifi

    Why is yellow light flashing on my airport exress wifi
    You can find out by opening AirPort Utility on your Mac or PC and clicking Manual Setup
    Click directly on the word "Status" *(2nd line on the summary page) and another window will open to explain why the light is flashing....and offer some suggestions to remedy things
    If everything else seems to be operating correctly on your network, it might be a message that an upate is available for the AirPort Express

  • Appletv v1 yellow light flashing; won't stop. First time startup.

    Just pulled model FA711LL/A from the box for the first time. (Bought it years ago as a backup. Now want to use it.) Plugged in the component cables (no HDMI on my monitor) and the power cord. Yellow light's been flashing for half an hour now and there's no sign that it's sending a signal to the monitor.
    What's my next move?

    Well, I should have tried this before anything else. I unplugged the Time Capsule from the power source and plugged it back in after about two  minutes. Green light appeared immediately. Coincidentally (maybe?), as soon as I did that and returned to Airport Utility, I had a message to update the firmware. I did check for an update earlier in the day, but TC appeared to be up to date at that time. Now I've updated the firmware, TC has restarted, and green light is on. Weired.

  • HT1178 why is my airport time machine yellow light flashing?

    My airport time machine yellow light is flashing ,why?

    Find out by opening the status on the airport utility summary page when you highlight the TC. There is no way of figuring it out except via the utility. What does it list is the problem.

  • Why is yellow light is flashing on my airport extreme

    Why is the yellow light flashing on my airport extreme?  I can't get it to work.  I want to set up my printer to print wireless.

    A persistent, flashing amber light indicates that any of the several potential conditions may require your attention:
    The base station has not yet been configured because it is new, or the reset switch has been set.
    You have selected a security configuration that is not recommended.
    One of several other conditions, such as a disconnected Ethernet cable or invalid IP address has been detected.
    (ref: http://docs.info.apple.com/article.html?artnum=305101)
    If you run the AirPort Utility, it will show an amber circle on the summary page next to the area(s) causing the problem. Click on this amber circle and it should provide an explanation.

  • I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights fl

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

    I connected the TC T2 with the iMac and used Air Port Utility to have it join my existing network. Now I have green lights on Apple Base Station and TC with the cable connected to the Base Station because hen connected to TC -- I get only yellow lights flashing on both devices> 
    When Connected through the Apple Base station I have perfect internet wireless capability thru-out house.
    Lamont

  • Endless blinking yellow light on my A1408 Airport Extreme...Why?

    I don't know what I haven't done in my endless, futile and otherwise totally failed attempts at getting the Airport Extreme to work...the yellow light flashes. That's how far I've gotten.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Select the AirPort Extreme and click Manual Setup
    Click directly on the word Status (2nd line on the summary page)
    A window will open to explain why the AirPort Extreme is complaining, along with suggested actions to remedy the illness

  • DLP 72HM195 - yellow light blinking 3 times?

    I have a Toshiba DLP 72HM195 TV. 
    I can get no picture to come on the screen at all, when I plug it in the blue light stays lit, and the yellow light flashes 3 times with about 2 seconds break between flashes. 
    I'm really at a loss to understand this.  There is nothing in the user manual for this light code.
    I have been reading online, and found that 3 flashing yellow lights means the seine boot has failed and I need a firmware upgrade. 
    First, does anyone know about the 3 flashing yellow lights, does this mean I need firmware flashed?
    Second, does anyone know how to flash firmware?  I really have no clue where to find software, and wouldn't know what to do with it if I had found it. 
    I really appreciate the help, I would really rather not throw out my 72" TV, and I hate to pay a repair man if its something simple I could do myself.  Thank you in advance!!!
    Jeff

    TCJ1971 wrote:
    Companion box blinking 3 times. What does that mean?I've only caught my Xi3 blinking once...  pulled power and let it reboot to reacquire signal/feed from the DVR...  hasn't done it since.

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • Blue operating light flashing yellow,/seems to be no video/

    Pavillion P7-1297cb  QZ233AA  HP2711xmonitor
    My logitech mouse stopped working on programmable keys so I rebooted.  The normal blue operating light flashed yellow three times, went back to blue but no boot.  Tilted box and checked cables, retried and then everything normal.  Computer 1 1/2 years old.
    What's wrong?

    Unfortunately, you never know what's gonna happen if you drop a phone.  You could try holding the power and volume down buttons simultaneously for about 30 seconds and see if that will reboot the phone.  If the phone seems to be working ok after that, a screen replacement might work.  Otherwise, you may have to replace the phone.

  • I just purchased an airport extreme router to increase the range of    my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    I just purchased an airport extreme router to increase the range of my wifi. I have an imac with 10.5.8. I get a flashing yellow light on the base unit and it tells me I need airport utility to install yhe ubnit. Where do I get this and how do I do it?

    sylviafromhanover wrote:
    So I assume that the original modem stays installed with the coaxial cable and the Exrtreme is in addition to that. 
    Yes, that is correct.
    Did you have the instructions that came with your Airport Extreme?  Are you sure you have it setup properly?  Here is the setup guide:
    http://manuals.info.apple.com/en/airportextreme_802.11n_userguide.pdf 
    Ensure you have everything setup properly.  Once you do this and if you are still having trouble, follow Star's instructions. 

  • Flashing yellow light?

    I've been reading other posts regarding the problems encountered by some after upgrading the Apple TV to 2.2. I believe my problem is related, but not sure. Others have found relieve by holding the "menu" and "-" keys on the remote to regain control, but mine just shows the apple icon on the screen and the yellow light continues to flash indefinitely (I guess). It's been flashing for several hours and nothing else appears to be happening. I've tried powering it off several times and as soon as I plug it back in, the light begins to flash yellow continously again. The Apple icon doesn't appear until I do the "menu" + "-" sequence again....but that's it.
    Also...and unrelated to this problem...does anyone else's Apple TV stay very hot as long as it's plugged in?
    Thanks

    The flashing yellow light combined with the failure to boot even after the power has been recycled would indicate a catastrophic failure. If it's totally unresponsive, there is nothing you will be able to do on your own to fix it. You should either call AppleCare or take it to an Apple store.
    As for the heat, yes, it does get very hot. The top is reportedly designed to act as a heat sink, eliminating the need for a large, potentially noisy cooling fan.

  • What does the flashing yellow light mean on my airport express?

    what does the flashing yellow light mean on my airport express?

    Open AirPort Utility, the application that you used to configure the AirPort Express and click Manual Setup.
    Click directly on the word "Status" (2nd line) and a window will open to tell you why the Express is complaining. What is the message?
    It might be a notification that an update is available for your Express.

Maybe you are looking for

  • How can i use AME for the new OAF page.

    Dear all, I have developed a new OAF page and registered under Employee Self Service. How can i use AME for the approval process. Appreciate your ideas? zamora

  • Error message when calling out on IPhone 4S

    When we dial out using our Iphone 4S phones, we get a message that says "Please re-enter the 10 digit number you are calling. Do not press send, *67 or *82 cannot be used to block Caller ID.  This is happening with all 4 of our Iphone 4S's.  I have t

  • Attribute change run problem - infoobject is not listed in the list

    Hi folks, When I load master data for 0customer, the infoobject 0customer doesnt come in the infoobject list for attribute change run. Also, when I try to activate master data manually it says 'Master Data already active'. and the reality is M versio

  • Can I execute a Windows script in my client machine?

    Hi gurus I have an APEX app that displays formated .txt files. I just want to select, click and send txt file to a predefined printer. ie. execute a COPY command Can this be done? Thanks in advance Oscar

  • Multiple tc types on one scxi 1102

    Does anybody know if you can use two different thermocouple types on one SCXI-1102 module?  I need to measure both Type K and Type T thermocouples.  I am using a SCXI 1303 connector block and plan to use the internal CJC. Thanks in advance doloop