HP Laserjet 1320 attention light on, printer not working.

I checked for paper jam, reseated printer cartridge, removed and reinserted printer and line cord plugs.  Turned printer on and off.  Attention light remains on and printer not working.

Hi Robert8695,
Let's manage one issue at a time. Regarding the error "unable to establish a two-way connection with the device", check out the link below for troubleshooting you can do to resolve it:
http://goo.gl/u3Snr
Let me know what happens and if the other problems persist as well.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Similar Messages

  • HP Laserjet 1536dnf MFP document feeder does not work

    HP Laserjet 1536dnf MFP document feeder does not work. I tried the suggested unplugged/plug and wait the required time but still no luck. Any suggestions?  It does not even recognize that there is paper in the document feeder.  Prior to this occuring, it used to say "document loaded"...now it says nothing.  I do not even get an error message.  It just does not work.

    Hi @jdm328 ,
    I see that you are having issues with the ADF not recognizing the paper loaded. I would like to help you out today.
    It might be a hardware or paper sensor issue with the printer, not detecting the paper being loaded.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    I have provided a document with steps for cleaning the ADF rollers and the separator pad, to see if that will help.
    'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o...
    Disregard the title.
    Try to make a copy again.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Printer not working following iPad uodate

    Printer not working following iPad upgrade

    Hi,
    Is the printer not mechanically working or are you having a problem with printing wirelessly from your device? Was the upgrade to the ipad software or did you get a new ipad?
    Try restarting your apple device - It's a simple fix that sometimes helps re-establish the connection to the printer.
    Other things to check would be that there have been no recent changes to the wifi password.
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Photoshop CC Lighting Filter is not working

    Lighting Filter is not working.  When you run the filter the circular ring/point does not appear to adjust the light.  It is totally missing. You can adjust the settings but the filter never runs.  After attempting to run the filter I tried to go back to my workspace.  It would not reset to the default Essential workspace.  The other workspaces were OK.  I closed and reopened the application and my workspace was restored.  I tried running my GPU settings in advanced normal and basic.  None of the settings worked.  Please advise if I am missing something.

    The filter is now working.  It looks like you must close and reopen the application after changing your settings for the filter to work. 

  • File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13

    File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
    I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
    Thanks

    I hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
    Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
    I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print

  • My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.   My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

    My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
    My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
    I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
    Thanks in advance.

    I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
    My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
    Airport Express is model A1143
    And I have tried to connect with iPhone - same same.

  • Windows 8.1 pro 64 bit - finger print not working (sony viao 15126pab)

    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/windows-81-pro-64-bit-finger-print-not-working/664d9ca8-a0ea-479f-851d-3631e3c1404c hi i am using sony svs 15126pab  2 days before firefox hanged so i forcefully shutdown the system , after rebooting fingerprint not workingthen i go to device manager i found biometrics working properly , 2, 3 times restarted then also finger print not working, then i checked the authentic true suite " its giving error message box and closing every times then i uninstall authentic true suite and installed again ,it asked registration and i  registered but i didn't see the finger enrolling options in the software . i enabled biometrics options  in administrative templates (components) , other options also enabled in services restarted , reinstalled from Sony Store  - nothing helps..................... please help me ,,, i cant enable the add option of fingerprint in sign in options in settings.. the add option is like deactivated , no biometrics tool in control panel, no fingerprint enrolling option in authentic true suite . i purchased the system with windows 8 pro then upgraded to 8.1 now its reserved to windows 10 . so pls give me some solutions to rectify this problem 

    I cant access any printers, not even the virtual printers.
    What I would do is use ProcMon to find out why that Event entry was written.  Then I imagine I would get a clue about a .dll which might be involved, which hopefully might be registerable.  Since IE9 there have been new .dll  involving printing
    which have not been reflected in any of our repair tools.  However, instead of modifying our old scripts to reflect this fact, I have been advocating, so far unsuccessfully, that Microsoft create a proper IE Repair tool, one which does not rely on such
    unreliable techniques.   E.g. a better method of repairing would be to have it done by a proper troubleshooter (an .msdt file) but so far it seems nothing has been done in that way for these symptoms (again, assuming the cause is registry corruption
    and not simple interference from now incompatible third-party programming--the fix for that would be to identify and remove the incompatibilities.)   For example.
    Robert Aldwinckle

  • I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?

    Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • HP LaserJet 1320 Duplex Printing Not working with Windows 7

    Hi
    I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
    I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
    If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
    Any help and advice will be much appreciated.
    Thanks
    GB

    Hello,
       I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
      A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
      Printer Properties:
      From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
     You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
        --> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
    Printing Preferences:
     again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
     -->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
      Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
     Let me know if this helps...
    HardCopyTed
    Regards,
    HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
    How to Give Kudos | How to mark as Solved
    Attachments:
    PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

  • LaserJet 1320, blinking sign interrupts printing

    Hello,
    When printing on LaserJet 1320, the process in the PC goes well and the document is sent to the printer. But the printer doesn't do the job - the sign "!" starts blinking as well as the green button is lit. I checked the manual and it says:
    1. Manual feed - no, I don't feed manually
    2. Out of paper for the specified tray - there is enough paper
    3. General continuable error - what kind of error is that?
    4. Memory configuration error - tried to add an extra 64 MB RAM, no effect
    5. Personality/Job related error - tried to print different things, all with the same effect.
    So, I tried many things and I came up with one thing - if I push the green button the "!"-sign stops blinking and the printer suddenly starts printing and there are no further problems. But, this is not an option to go press the button each and every time you print, so how do I fix this problem?
    Thanks in advance!

    You can check to see if your printer device driver is up to date if you are running a Windows operating system through hp.com. At the home page, click on "Support and drivers", then "See support and troubleshooting" and enter your product name (laserjet 1320). Click Go. Choose the model of laserjet 1320 you have from the product list. On the right side of the resulting screen above a pink box advertising the support chat option, you'll see a link to "Automatically see if your driver needs updating". Click on it and follow the steps.
    I had this problem and discovered I had to change some options in the printer driver. If you have Windows, get to the Printers and Faxes through your Start button. Right click on the laserjet 1320 and choose properties. Click on printing preferences. My software didn't like having the paper type be automatic, I had to change it to plain. You may have similar problems with the settings for paper source or paper size if they are on automatic.
    Some software allows you to adjust the printer properties from the application itself. Use the file, print option and see if there is a Printer Properties button in the dialog box that come up. If so, that may be an easier way to access these settings.

  • HP laserjet printer not working

    HP laserjet printer not working

    Greetings,
    Can you please tell me what model Laserjet you are working with?
    Also, how are you trying to connect with this laserjet, USB or Wifi?

  • HP LaserJet Pro 400 M401a Laser Printer Not Saving Downloaded Fonts

    Hi,
    we have recently purchased an HP LaserJet Pro 400 M401a Laser Printer which needs to be used with a system that downloads fonts for correct style printouts. The problem I am having is the fonts download initially which is great, but they are not saved by the printer after 1 printout so the user is having to download the fonts everytime she wants to print something.
    All other printers in the office are HP2055 and work as expected saving the fonts after the initial download. I have asked the support team of the application to have a look at the situation and they say everything is setup correctly so it may be an issue with the printer. Printer is installed on a Windows XP SP3 PC.
    Firware version: 20121205 (15 Dec 2012)
    Driver Version: 61.140.04.14138 (1 Jan 2013)
    Any help would be appeciated, thanks.
    Robert

    If the downloaded soft fonts are definitely not being saved (despite the download presumably terminating with a 'make soft font permanent' escape sequence), then the problem must lie in the firmware - and the only resolution is if HP releases  a new version with a fix.
    To be certain about which PCL5 fonts are resident in the printer, you have presumably printed off a  'PCL5 Typeface List' via the relevant front panel menu (assuming this printer has one).
    Or you could send the following direct to the printer to invoke that report:
    <Esc>%-12345X@PJL COMMENT Print PCL Font List
    @PJL DMINFO ASCIIHEX = "040004010105020402015E"
    <Esc>%-12345X
     where <Esc> represents the non-graphic) Escape control-code character (the character with decimal code 27, or hexadecimal 1B), and each PJL statement is terminated with a LineFeed control-code (decimal 10, hexadecimal 0A).
    Assuming that the printer is USB-connected, you could send the contents of the file (name, say, testfile.prn) holding the above to the printer using the copy command in a command-prompt session:
    copy /b testfile.prn \\computer-name\share-name
     where:
    computer-name is the name of the host workstation
    share-name is a share name of the installed Windows printer instance.
    I don't have access to your model of printer, but I do use a LaserJet Pro 400 Colour MFP 475dn (MFP equivalent of M451 printer), and this does appear to retain downloaded 'permanent' soft fonts - but only until the device goes into 'sleep' mode!
    So it is probably a common 'fault' (or 'design decision'?) across this family (LJ Pro 400) of printers.

  • HP LaserJet P1005 Two-sided printing not working on network

    Good day!
    I have a desktop, with Windowx XP, to which my LaserJet P1005 is connected via USB. My wife has a laptop, with the same Windows XP, from which she can print, but the two-sided option does not work right. She can check it and print, but the window to restart printing for the second side does not open and there is nothing we can do at this point.
    I have trie duninstalling the printer from both computers and reinstalling the newest drivers, it still won't work.
    Thanks for your help!

    I have an HP PhotoSmart 2575 All-in-One with the latest HP driver that displays the two-sided printing option greyed-out in the Layout window. According to HP, your printer must be capable of accepting an optional two-sided printer tray to work on a Mac. To me that is ludicrous since in Windows the driver supports manual two-sided printing.
    To get around this, I select the Paper Handling window and from the Pages to Print drop-down list select Odd only instead of the default All Pages. After clicking the print button the odd pages print starting with the last page and ending with the first. I then remove all paper and reinsert the printed pages with the top of the page facing the printer. First, though, I reorder the pages with the first page on the bottom and the last page on top. If the total number of pages is an odd number, I remove the last page from the inserted stack, as that is the very last printed page. I then select Even only from the Pages to Print drop-down list and click print again.
    Problem solved.

  • Deskjet 6988, wireless printing not working. Network light blinking.

    Deskjet 6988 will only print when connected via USB, used to work wirelessly.....now network light on printer blinks.  Please assist. 

    Get the latest software for your printer from the "Support & Drivers" link at the top of this page, run it and choose Network or Wireless installation when it asks.
    What operating system are you using?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MFP 177 wireless printing not work on win8.1

    Hi,
    Just bought a HP color Laserjet MFP177 4 in one printer. After installation (and many attempts) i am failng to print from my PC. However it did print the test page at the time of installation and scanning function is working fine.
    Please help

    Hi @Razeen ,
    I see that you are not able to print over the wireless network, but you can scan. I can help you with this.
    Temporarily turn off any Firewalls to make sure they aren't interfering.
    I have provided a document to try and resolve this issue. Also download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Disregard the title.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for