Hp laserjet 1320 - networkin problems - networking solution

hi
i had the same problems like some of you with the hp laserjet 1320 n while using this printer in a network.
here is a solution that may work:
connect the printer directly (not via router) to the computer, reset the network settings ofthe printer (press button on the back near the rj-45 connection for 5 sec while starting the printer). wait for 5 min!!!, then print the network status (press shortly the same button onthe back of the printer). read the ip adress, which the printer had given himself. the go to safari an type in the adress. now you are getting connected to the printers settings. set the ip to dhcp an give the printer a certain number inbetween your ip range of your dhcp settings in the tc/ip (mostly 192.168.x.x). then you can disconnect an connect the printer back to the network-router.
then print center: thrwo away old 1320 printers and search again for the 1320. this time it should work, even with the hp installed printer-description from the installation cd.
good luck
imac g5, pb g4, etc.   Mac OS X (10.4.7)  
imac g5, pb g4, etc.   Mac OS X (10.4.7)  

it works

Similar Messages

  • Apple Mail send and receive problems, Network Solutions

    Hello Everyone,
    I'm currently facing a problem with a company email account that we have with network solutions.
    NSmail Pro (IMAP) that is configured with apple mail. Here are the settings that i have:
    Incoming mail: mail.(company.domain).com
    Port: 110
    SSL: No
    Outgoing mail: smtp.(company.domain).com
    Port: 2525
    SSL: No
    Auth: Password
    Whenever i'm at the office, I can send and receive emails without any problems (Using mail app), but when i'm at home i can't receive emails nor send one.
    I'm wondering if this has something to do with the Mail application, cause i can access the email using the webmail on a browser without any problems (either at home or at the Office).
    Any thoughts from our experts?

    I'm guessing that when you are at the office, you are probably accessing a company network and the company mail will only work with those settings on the company network. You may need to discuss this with your IT department at work to see if it need a different configuration for outside access.
    The fact that it works at work and not at home indicates a that it surely an issue with the connection setup.
    Assuming that you are accessing it through wi-Fi at both locations, do you have different wi-Fi connections set up on you Mac in Network Preferences, or is it the same wi-Fi connection used for both? In other words, do you have a specific wifi setup on your computer for connecting at the office?

  • LaserJet 1320 is now network-attached, but Toolbox is missing information

    Howdy y'all, I re-installed a LaserJet 1320 using a switch and a non-HP print server. It had been attached via USB to a user's PC (XP Pro SP3). Also updated the PCL6 driver to the latest. The printer had to be networked to support custom app updates. Now HP Toolbox sees the printer, but Device Status isn't working. The message is "Key No map value found for key = DevStatusUnrecognized_1 not found. (0)." Toolbox correctly recognizes the IP address and the name, but all the Product Information is null. About Toolbox displays the following: "Tomcat server version: 4.0.3  Java run time environment version: 1.3.1_07 1.  toolbox version: 2.59.20040315  2.  toolbox version: 3.10.20040714         Installed Devices:    - HP LaserJet 1320: 3.10.20040714" Dunno why there are 2 toolbox versions. Alerts were turned off by the user; may have been annoying. JRE 8U51 is installed. I have a feeling that Toolbox doesn't support non-HP print servers. When I click the Network button, the web server looks for http://192.168.???.???/hp/jetdirect, but there's no such page. Error thrown is "501 Method Not Implemented." This Toolbox instance is quite old. Is it really worth running? Thanks much. 

    it was the linksys router I was going through - direct connection through airport and it works like a charm.

  • HP LaserJet 1320 requires user intervention to print after Leopard

    Ever since upgrading to Leopard, almost every single time I send a print job to my HP LaserJet 1320 (over the network, it actually connected to a PowerMac G5 in my office), it triggers an error warning (orange flashing light) on the printer. Pressing the main green print button lets the job print, but this is really annoying.
    I checked and Apple recently posted a note about the HP LaserJet 1200 having a very similar problem except that an error page was printed after each job. The workaround they suggest for this doesn't work with the LaserJet 1320 problem, however.
    A quick Google reveals at least one other Leopard using HP LaserJet 1320 owner is seeing a similar issue. And actually, as I composed this post, I found some 1320 owners in another Apple Discussion post about HP printer issues with Leopard. They suggested using the generic PostScript driver, but then I really like to have the ability to duplex.
    Nothing in the /private/var/log/cups/error_log file of note as far as I can tell.
    Any ideas? Any other people out there experiencing this problem who might have a solution (other than switching to a generic postscript driver)?

    Ok, I think I've figured a way to make the laserjet 1320 stop requiring "user intervention" (e.g. pressing the green button for every printjob).
    Try the following:
    Open "System Preferences" -> Choose "Print & Fax" -> Choose the Laserjet 1320 printer -> Press button "Options and Supplies..." -> Select Driver "tab" -> In the drop-down-menu "Fit to page" choose "Nearest Size and Scale" instead of "Prompt User".
    The chosen driver should be "HP Laserjet 1320 series", because the generic postscript printerdriver dosen't have the duplex option amongst other shortcomings.
    I find it odd that the lowest memory-option is 16-31mb of ram. The default configuration of 16mb is not IN that range, but maybe that is a little too nitty-gritty.
    ~ Jørgen

  • Problem print all pages on my HP Laserjet 1320 from my Mac

    I am having a strange printing problem.
    Happens in almost any program (Mail / Excel /Preview/Word/TextEdit/etc.).   I can ask it to print a one page document.  It spools, the printer flashes.  The computer said it is done but nothing printed.   On the same document, if I tell it to print 2 copies of the one page document, it will print one page sometimes and two pages other times.  When printing long multipage documents it will sometimes not print the last page.   It is almost as if the needs to be something at the end of the print job to push the last bit along to the printer and complete the print job.  It only started happening 3-4 months ago.  Now I have to check everything I print to make sure it is all there.  This printer is connected to my Mac Mini via USB.
    If I send the same print jobs to the company network printer....everything prints fine.  (Kyocera - copier/printer/scanner/fax combo unit)
    Here is some info on My system.
    Mac Mini 2.3 GHZ i5 / 4GB memory
    OS X 10.9.5
    Printer is HP Laserjet 1320
    I have deleted and reinstalled the printer several times and no joy.  

    I've also had problems with the HP 1320 and my Mac. Some things print, while others just give a blinking green light and then it goes off. This recently happened to me while trying to print a series of labels from Word. Giving up on the HP, I decided to print the labels off my inkjet printer and placed a number a labels in the printer and hit print for 100 copies. Since I had being doing some other things in-between, I didn't notice that the print select had also gone to my default printer the HP. Suddenly, thinking the inkjet was to print the labels, the HP starts printing those labels. I then noticed that the HP was the printer selected, but I was at a loss to figure out why it suddenly had started to actually print the item that I was previously unable  to do. I finally determined that when I tried printing to the HP with the initial (1) copy it would not print; if I changed that number to (2) it would print one copy; if (3) I would get 2 copies; thus the print was giving exactly one less copy than I selected; thus when I select (1) copy it reads it as 0, will blink green and give me nothing. Give it a try.

  • Laserjet 1320 on win 7 (64bit) - cannot access from a networked XP Pro machine?

    I have a Laserjet 1320 and a Officejet 6450 attached to a win 7 (64bit) machine - both work fine.
    Have a home workgroup network established with an XP pro machine.  Both printers are "shared" etc..
    I can access the Offiejet from the XP machine, but cannot get access to the Laserjet.  Claims that
    the proper Driver cannot be located.  Have downloaded the PCl5 driver to the Win 7 machine, but when
    I point the XP machine to the HP PCL5 Driver folder on the win 7 machine it still cannot find the proper driver.
    Any help will be appreciated.

    Hi Don
    Thanks for the reply.
    The version of Visual Studio being used is 2002 (getting on a bit now).
    We had a play about with the way we installed the MSI installer we had created that installs the Crystal Reports runtimes (merge modules) and managed to get it to work on both Windows 7 32bit and 64bit.
    The solution was a weird one, but seemed to work (but was different to what I had done before to get it to work).  We made sure the MSI was local on the PC and right-clicked the MSI and selected the ''Troubleshoot Compatibility' ' option.  Not 100% why this would work, but it seems to have done the trick.
    Many thanks for your help.
    David.

  • I can send email but not receive on my iphone 3GS. Emails to my .me address are OK but not emails to the address hosted by Network Solutions. NS have checked my settings twice. I am using IMAP. Is this a problem with iCloud?

    I use IMAP email hosted by Network Solutions for my main email address. I can send and receive this OK in my Mac Mail on my MAC book and also on webmail. However my iphone doesn't receive these emails but it can send. I have checked settings on my iphone twice with Network Solutions but no luck. Emails addressed to my .me address are received OK. I have a suspicion this problem started when I signed up to icloud.
    my ISP is BTconnect
    Any ideas?

    Useful suggestions. In fact I had already deleted and re-entered the account details a few days ago without apparent success. The error message was along the lines of "cannot access the server".
    Anyway about an hour after your message, my emails started coming through after a 6 month gap!  - makes me think someone at Network Solutions monitors these discussions.
    Many thanks

  • Windows 7 system cannot network print to LaserJet 1320

    Recently our office got a new Windows 7, 64-bit laptop, and for the past three days I have been unable to get it to print though the network to our HP LaserJet 1320. I can connet it via the USB cable and print directly to the printer, however, I recive an "unalbe to connect" error with all attempts to connect to the printer through the network .
    The LaserJet 1320 is conncected to an XP system and shared over the network. Three other XP systems and two Linux systems can connect and print to it just fine.  Also the Windows 7 laptop has been able to print to a shared HP DeskJet 6980 and an ancient Lexmark 4039 though the network. 
    It does not appear to be a network issue. I've tried varous versions of the HP Universal Printing driver, but so far not has been able to connect though the network. Is there  one in particualr I should try? Does the Universal printing driver not support network printing?
    Thanks! Any help with this probelm will be greatly appreciated. 

    Never mind solved my issue using the specific vista x64 (on windows7) driver rather then using the universal print driver...
    Might fix your issue with network shared printer.

  • HP LaserJet 1320 Not Showing Up On Network

    I just added a pc with windows xp professional service pack 3 to my airport express network. The internet works but when I go to load my HP LaserJet 1320 print drivers from the installation cd the setup wizard can't find the printer on the network. My mac can see the printer just fine. Help!

    Just to be clear, is this the Bonjour Printer Wizard?

  • Publishing to network solutions problem

    I have been trying to publish my new site to my network solutions domain host.
    I press publish then fill out the ftp form but it keeps coming up with a message that says "Incorrect password for "my user name" on "ftp.mydomain.com please try again
    Obviously in the above message I have replaced the correct information with "my user name" and "mydomain.com"
    But I know I am using the correct password for my domain?
    I don't need a mobileme account account or anything do I?
    Any help would be great

    When I first tried to publish my web site directly from iWeb, I also had a lot of problems and it kept giving me a similar error message even though I was using the correct log in information. I believe the isue is more with the domain host's ftp site rather than iWeb.
    In the end, I found it easier to publish the site to a folder and then use a separate ftp client (I use Filezilla) to publish to my domain host. It is an extra step but has never failed me.
    Hope this helps.
    David

  • CAN'T PRINT ON LASERJET 1320 EVEN THOUGH IT SHOWS AS ONE OF MY NETWORKED PRINTERS

    I have a Laptop running Windows 7 64. I have two printers in my office A Laserjet 1320  connected directly to an XP desktop and a Photosmart 6180  They show in the printers list on my laptop as   Laserjet 1320PCL on 192......etc   and  Photosmart C6100 on 192....(same number as Laserjet, ) If I select the C6100 printer it prints out correcly.  If I choose the Laserjet1320 nothing happens. Any suggestions to correcting this problem would be appreciated, 

    Thanks for sharing that info, this will be really useful if others would ever run into the same issue.
    Audere est facere

  • Problems with using Laserjet 1320 with Vista 64 bit

    I have downloaded drivers for the PCL 5, PCL 6 and the PostScript for the Laserjet 1320. I can not get the toolbox, I can't print multi copies, or turn the paper to landscape. Basically I can't do anything except to point and print and not make any changes in the printing box before printing. It was only after downloading the postscript that I can now print selected items, but wondering if that will still work once I turn off my computer and restart it.
    How can I get my printer to work with Word 97 and Vista 64-bit?  I can't use the printer disk to install it onto Vista 64-bit because my printer is a usb  plug- in  (hope I got the usb right or is it ubs???) sorry I'm flustered!
    Should I also install the universal drivers? one of them -- all of them???
    Please Help!
    At wits end in Maine!

    I'm afraid that both you--and me--are out of luck!  Yesterday I emailed HP tech support asking for a version of the Toolbox that would work under Vista and was told, in effect, "Sorry, Charlie, but the 1320 series is not a current model so we don't support it anymore."  (Unfortunately, they NEVER properly supported it, since I was asking for a Vista version of the Toolbox since April, 2007.)
    HP customer support has deteriorated markedly since Carly Fiorina began to destroy the company several years ago! 

  • HP Laserjet 1320

    I should start by saying that I'm quite frustrated, so please forgive that.
    I have tried everything. I've been a Mac user since the OS9 days and while I don't claim to be an expert, I know a thing or two about a thing or two. *I have never had such a rough time with an OS upgrade and a printer!*
    I have tried removing the printer, re-adding the printer, resetting the printing system, unplugging, plugging back in, restarting, various drivers (including Gutenprint), deleting preference files, installing 10.5 drivers, reinstalling drivers from the SL dvd and the list goes on. I've followed every bit of thread advice that I've read here and nothing works.
    I have been stuck in "pause purgatory" with my HP Laserjet 1320 since installing snow leopard.
    I am not using IP printing. It is connected directly to the iMac via USB. I've used this printer with this Mac forever.
    I keep reading here and there that "there's a driver for the 1320 in Snow Leopard. Use it or try Gutenprint". Yes, I agree that there's a driver and a Gutenprint driver in Snow Leopard but for all my trying, *they don't work*. I'm still stuck in pause purgatory.
    Can anybody, puhleeeeeeze, offer a suggestion of how they did it, if they've been able to get this printer working? I am really tired of not being able to print at home and having to take everything into work to print.
    Thank you for putting up with this rant. I hope someone can help.
    Thanks!

    After installing snow leopard, my networked laserjet 1320 wouldn't work (unresolvable pause), and the printer control panel insisted I needed a new driver, even after I followed its advice and ran software update to download all the hp drivers.
    The problem may have been appletalk, but in any case the solution was to delete the printer queue, let bonjour find the printer, and create a new queue.

  • Hp laserjet 1320 not working with new mac

    i've recently bought a new apple computer, the mac runs with os x 10.9.2.
    now i'm trying to get my old hp laserjet 1320 to work together with my new computer - but neither the mac is cooperating nor the old laserjet. i've also installed a new hp officejet pro 8600 - this printer/scanner/fax works well, but i also wanted to use my old laserjet until i run out of printing cartrigdes )
    thanks for the help!!!

    Hello nyc213,
    It sounds like you are unable to use your LaserJet printer with your computer. I recommend the troubleshooting in the following article named:
    OS X Mavericks: Solve printing problems
    http://support.apple.com/kb/PH14142
    Check the printer
    Go to the printer and check the following:
    It’s turned on and is displaying normal status lights.
    It has paper, and the paper isn’t jammed.
    It has enough ink or toner.
    Its cables are properly connected.
    If your printer is attached to your computer’s USB port, open System Information, then click USB. If the printer’s name appears in the hardware list but the printer doesn’t work, review the printer’s documentation for further troubleshooting information.
    Check your device’s USB connection
    If the printer is on the network, open Printers & Scanners preferences, then add the printer again to create a new printer queue. For instructions, see:
    Set up a printer
    Use the best software for your printer
    Make sure you have the correct version of your printer’s software (also called its printer driver).
    If you’re using a printer that another user is sharing, make sure you’re both using the same version of the printer software. To find out which version you’re using, select the printer in Printers & Scanners preferences, click Options & Supplies, then click General. Note the driver version.
    If you’re using a network printer or a printer attached to your Mac, make sure you have the latest version of the software for the printer. If you still have problems, try different printer software for your printer.Change or update printer software
    If you still can’t print, reset the printing system.
    Reset the printing system
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • HP LaserJet 1320 stopped working with Mac

    Hello. I recently installed OS X 10.7.5 and now my HP LaserJet 1320 no longer communicates with my computer. I've searched HP site (refers me to Apple for updates), installed all update from Apple, deleted and re-added the printer, but the problem persists. does anyone have a solution?
    thanks!

    Hi smurfie407,
    Welcome to Apple Support Communities.
    Try running through the troubleshooting tips in the article linked below, they should help you resolve the communication issue between your iMac and LaserJet printer.
    Troubleshooting printer issues in OS X - Apple Support
    Take care,
    -Jason

Maybe you are looking for