HP LaserJet 1320 Not Showing Up On Network

I just added a pc with windows xp professional service pack 3 to my airport express network. The internet works but when I go to load my HP LaserJet 1320 print drivers from the installation cd the setup wizard can't find the printer on the network. My mac can see the printer just fine. Help!

Just to be clear, is this the Bonjour Printer Wizard?

Similar Messages

HT1549 Shared files do not show up on network

Macmini running on OS X 10.6.8 on a trendnet router connected to windows 7 pc. Mac will not show up on network after going over the steps to set up file shareing.

Hello Jfrosa,
Thank you for the details of the issue you are experiencing with File Sharing. I found an article that should help with troubleshooting this:
OS X: How to connect to Windows File Sharing (SMB) using Snow Leopard or earlier
http://support.apple.com/kb/ht1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

Wireless network connection not showing up in network connections

Hi, Experts,
I recently re-image my Toshiba laptop (using window xp installation disk) due to I deleted few system files accidentally and can not boot the system up.
Before I re-image, I have no problem to connect Fios internet. After the re-image, the wireless network connection not showing up in network connections, so I cannot set up my Fios internet.
How to set up the wireless network connection that it will show up in network connections? Thank you very much for your help.

Issue Resolved. I did not turn on the wireless switch.

Hp laserjet 1320 not working with new mac

i've recently bought a new apple computer, the mac runs with os x 10.9.2.
now i'm trying to get my old hp laserjet 1320 to work together with my new computer - but neither the mac is cooperating nor the old laserjet. i've also installed a new hp officejet pro 8600 - this printer/scanner/fax works well, but i also wanted to use my old laserjet until i run out of printing cartrigdes )
thanks for the help!!!

Hello nyc213,
It sounds like you are unable to use your LaserJet printer with your computer. I recommend the troubleshooting in the following article named:
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Check the printer
Go to the printer and check the following:
It’s turned on and is displaying normal status lights.
It has paper, and the paper isn’t jammed.
It has enough ink or toner.
Its cables are properly connected.
If your printer is attached to your computer’s USB port, open System Information, then click USB. If the printer’s name appears in the hardware list but the printer doesn’t work, review the printer’s documentation for further troubleshooting information.
Check your device’s USB connection
If the printer is on the network, open Printers & Scanners preferences, then add the printer again to create a new printer queue. For instructions, see:
Set up a printer
Use the best software for your printer
Make sure you have the correct version of your printer’s software (also called its printer driver).
If you’re using a printer that another user is sharing, make sure you’re both using the same version of the printer software. To find out which version you’re using, select the printer in Printers & Scanners preferences, click Options & Supplies, then click General. Note the driver version.
If you’re using a network printer or a printer attached to your Mac, make sure you have the latest version of the software for the printer. If you still have problems, try different printer software for your printer.Change or update printer software
If you still can’t print, reset the printing system.
Reset the printing system
Thank you for using Apple Support Communities.
Take care,
Sterling

Firewire drives do not show up on network

I have a G5 with 2 external drives, 1 firewire, 1 USB
I have a G4 with 2 external drives, both firewire.
When these computers are networked,
The G5 sees the internal drives from the G4.
The G4 sees the internal drives from the G5, as well as the connected USB drive.
But neither computer sees the external firewire drives of the other computer.
I used to see these drives and made aliases for them, but they do not show up now.
I am using the admin accounts from each computer.
G5 running 10.4.5
G4 running 10.3.9
What is the cause of this problem? How can I mount the firewire drives on the networked computers?

I need to modify my question. I also have a G3 running 10.2.8
Yesterday I noticed that the Network icon in the G5 sidebar had an eject symbol next to it. That seems strange, upon reflection, as if something was not right.
I shut off all the machines for the evening.
Today, I restarted all the machines. Chose Finder->Go->Connect to Server->Browse
From each machine, I was able to see the external drives on the other machines, as well as the internal drives, over the network. I did not use nor install sharepoints. It just works (with an admin account).
However, on the G5, there is an external firewire Firelite drive. It is formatted as Fat 32.
It does not show up in the Browse window when I connect to the G5 from any computer. If I move it to the G4, it also does not show up when I connect to the G4 from any computer. So it does not seem to be related to the OS version.
In other words, it seems that since the Firelite is Dos formatted, I cannot see it on the network, even though it is a firewire drive.
So how can I fix this problem?
iMac G5, TiBook, G4 MP 500; G3 beige 333, iMac 333, others Mac OS X (10.4.4)

HP Laserjet 4 not showing up in chooser

I acquired a HP Laserjet 4 with a jet direct card installed. The printer does not show up in the chooser. The printer test page shows that AppleTalk is active and the printer should be named Laserjet 4 but I cannot see it when I click on the Laserwriter 8 icon in the chooser.
Appletalk is active and the computer is using the printer port (appletalk control panel)
The printer and computer are connected by an DIN 8 cable (old stylewriter cable).
I really like to get this printer working with my Beige G3 any suggestions?

I think I solved my own problem. I do not have the postscript SIM module installed in the printer. That is probably why the printer is not showing up in the choosen. Postscript may have to be installed in the printer first.

HP Laserjet 1320 not printing PDF files

I can't print PDF or JPG files from my MacBook Pro to my HP Laserjet 1320, connected on USB. MS Word files are printing fine and so are Test Print commands. This has morphed today from an earlier problem a few days where only the 1st page of PDF documents was printing. The printer blinks the green light for a while and then goes back to normal. The Print Box on the Mac says "Printing - Sending Data to Printer" for a while, and then the file name, etc disappear, and everything is back to normal, as if nothing ever happened. Meanwhile MS Word files go on printing without any problem.

I have been experiencing the same problem.
(I moved from 10.6.8 to 10.10.2)
I did a lot of searching and these two steps have helped. (possibly fixed it for good?)
Run "Disk Utility" —> Verify Disk Permissions (Repair any errors)
The printer settings need to be reset. (see link below) NOTE: You will lose all the printers in your system settings and have to reinstall them.
https://support.apple.com/kb/PH18614?locale=en_US
Please note that HP does not have a update for 10.10.2 for this model.
The last driver version from HP is: 19.8
Adobe does not have a plug-in update that I can find, yet...
The more you change the settings as you use each proram (firefox, word, numbers, safari, adobe reader) the worse the problem seems to get. I would suggest that you pick one setting and keep it. (Program based settings seem to be less prone to errors.)
Let me know if this helps.

Photosmart C310: WiFi connected, but not showing up in network via Mac or iPhone

I am using a HP Photosmart Premium C310. It is connected to WiFi, but does not show up on Mac or iPhone via Wifi:
- iPhone Airprint does not find the printer (select printer)
- Mac "add printer" does not find the printer
- newest HP Setup Application (HP_Lion_Ink_SW_v12.13.14, Dec 2011) finds printer only as long as connected via USB, reconfigures WiFi settings, but can not re-find the printer when USB cable is taken off
- I can send "ping" to the printer using the IP address shown in touchscreen info panel so it is online in WiFi
- I tried to reset factory settings for settings + network settings, no change...
Is that a defect or any idea how to fix the problem?
Best regards, any help appreciated...

Hi,
Per your description, i believe the issue may being caused by your router compatibility with Apple Bonjour, which require multicasting support in order to operate propertly.
In order to verify, try to temporary create an ad hoc connection between your iPhone and the printer and check for any change:
Step One : Restore the network defaults on the HP All-in-One
On the product control panel, touch the Setup icon ( ). The Setup menu displays.
Touch Wireless .
Touch and then slide your finger down on the display to select Restore Network Defaults .
When asked 'Are you sure? ' touch Yes .
After the network defaults restore, touch Wireless Connection , and then touch On .
The message 'Wireless Radio is now on ' should briefly display on the control panel and the Wireless light ( ) on the HP product should start to blink. The HP product is now openly broadcasting the ad hoc wireless network.
Step Two: Create an ad hoc wireless network connection between the HP All-in-One and the Apple device
On your Apple device, tap the Settings icon ( ).
Tap Wi-Fi .
Under Choose a network , find the name that starts with HPC310 , and then tap it. A checkmark should display to the left of the name.
Wait three minutes to make sure that the ad hoc connection is established and try printing from the iPhone by taping the Action icon ( ) and then tapping Print.
If you were able to print through the direct printer, it means the router more likely cause the problems..
Please clarify your router brand, model and the router firmware version if available.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Device Connected But Not Showing Up In Network Map

Network Magic Version: 5.5.9195.0
Connection: Cable
Modem: Linksys WRT54GS2
Firmware: 1.0.02 build 007, Jan 21, 2010
Problem Device: Blu-ray, wireless
Operating System: Windows 7 Home Premium, Service Pack 1
Anti-virus/Firewall/Spyware: Microsoft Security Essentials/Windows Defender/Spybot
Website Issues: I can visit any site
My blu-ray is connected to my network. I know this because I have no issue streaming Netflix. However, it is not showing up on my network map.
How do I fix this?

Oh! And here's another weird thing. My nephew was visiting yesterday, helping me move furniture and he asked could he get on my wifi. I opened the network lock and put the password in his phone myself and it never gave me a notification that he had connected. Later, my dad came over and when his phone connected to my wifi, it let me know that he had connected. Wonder what's different about these 3 devices (blu-ray, 2 iphones). None were listed in the network map before I allowed them to connect yesterday.

Ethernet not showing up in Network Preference.

The ethernet does not show up in my Network Preference panel.
When I plug in an ethernet cable I get a kernel panic. HELP
PowerBook G4 Mac OS X (10.4.5)

When I plug in an ethernet cable I get a kernel panic. HELP
What device is the other end of the cable connected to at the time this happens?

Drop Box folder in the Public folder not showing on the network

Hi everyone,
I am running a MacBook Pro 2010 running OS X 10.8.3 Mountain Lion. We have an office and multiple mac computers connected to our network. For us to transfer files we use the Drop Box folder inside the Public folder (We do not use the dropbox website/service). We would use the finder and click on the computer on the sidebar, open the Drop Box folder and drag files in with no hassel. However my Drop Box folder is not showing up when other users are trying to access my computer via the network.
My file sharing is on and I have attached an image with the settings I am using. I have compared these settings to other macs in the office that have a working Drop Box folder and they match. Hope you guys can help me.

Contact Drop Box tech support.

I need help troubleshooting computers not showing up on network

seriously, everything was fine until xmas eve. Now I can't see the computers on the network on a mac or a pc.
Now, when I go to Start/My Network places on a pc the share points do not show up.
Also when I go View Workgroup Computers - it returns an error. In the error it mentions permissions. I've propogated permission, restarted SMB services and restarted twice.
OSX 10.5.1, Xserve, standalone server, SMB services are running, one username and password for everyone with r/w permission, even guests access is turned on, ...
AT&T Netopia dsl modem (bridged mode), Linksys wireless router with ip's assigned to all computers, to a switch that routes to users and two more switches.
note - I can see a few macs on Mac OSX Tiger and Leopard but nothing on the pc's. I can, however, see a unix sever that's on the network by typing \\ServerName in an explore address bar. And at one time I could type in \\Xserve on both macs and pc's but no longer.
Thanks,
ctrent

Any relationship to what works and what doesn't?
no
Could there be a bad cable or bad switch port?
I've thought about that - checked and rechecked
Do you know how to see if there are two momputers with the same ip connected to a network?
Tried swapping a working and a non-working box to see if it's the connection that's stuffed?
no
but I just did
I tested an imac using the same connection. It was able to browse the entire network.
I noticed that MacBookPro had tld-internal.com in the Search Domains entry box.
I entered TLDMacserver.com as the search domain and was able to browse the server share points and read and write. (hoorah!)
I think that this is where the problem is - Is there a domain that needs to be set up or is already setup? I don't know of a setting on pc's to Search Domains - is this just a mac thing?
Now, seeing the other computers is the issue. I can only browse 4 macs and the Xserver on a mac but nothing on the pc's.
Is there something in the Advanced TCP/IP Settings that I should know about?
My server name on the left panel in Server Admin is TLDMacserver-com.local.
Under Settings/Network the computer name is TLDMacserver-com
Computer Name - TLDMacserver.com
Local Hostname TELDMacserver-com
Network Interfaces: Ethernet 1
IPv4
192.168.0.32
DNS Name: TLDMacserver-com.local
Anything interesting in the SMB-related server log files on the Mac OS X Server box?I'm not really sure what to look for.
That's one of those cases where digging through the logs looks for oddities.
I would probably have as much luck digging for gold.
Also, probably related to my problem - my logmein.com remote conrol no longer works. I tried deleting the machine from my list and reinstalling Logmein on the server, but it won't install.
It says:
Istaller is damged
Installer is unable to open the package.
This is likely due to install framework's runner executable not having he proper ownersip &/or persmissions.
Definitely seems that something got stomped on. Mayhap the disk?
What's the state of your data archives?
for those machines that can browse it's working fine.
Your backups current?
yes. A firewire drive that's swapped out. They both are backing up right.
Next step would be to boot the installer DVD and verify the disk and verify the disk protections.
it's just a download file from LogMeIn.com
As soon as it downloads that error pops up and when I manually try to run the .pkg the error occurs.
Up until now I've been able to log in just fine from anywhere.

LaserJet 1320 not being recognized, really strange

Hello all,
I'm having a really strange problem that I think is mostly my fault. I just recieved a LaserJet 1320, and when I first hooked it up everything worked fine.
However, I couldn't figure out how to do duplex printing, so I installed HP's Toolbox software. A big mistake, and I ended up having to manually delete all of the file it put in /Library.
Anyhow, now my Mac won't recognize the printer at all. Print Setup Utilities shows nothing. I've reinstalled the HP PPDs from my Tiger CD, still nothing.
The Printer works (Tested on an old Linux Box) and the USB ports on my Mac work, but still I can't get the printer to be recognized.
*pulls out hair*
Any help would be welcomed.
Thanks,
Clark
Powerbook G4 1.5 GHz Mac OS X (10.4.4)

I had the same problem with a friends computer.
She had put the CD in also.
I nearly lost the will to live trying to fix it so I plugged it into my powerbook to see if the printer was OK. I could print perfectly.
I then copied the printer from username/Library/Printers/ folder and then dropped in into her printers folder. It worked brilliantly. All you need is another mac that has never been near an HP install CD.

Wireless adapter not showing any available networks

I've recently discovered that my Intel Centrino Advanced-N 6235 wireless adapter in my Asus Zenbook UX32VD running Windows 7 64 bit is not working as it won't show any available networks while my phone can find plenty in the same area.
So far I've:
-Re-installed the driver. Before I did this the adapter wouldn't even show when trying to change adapter settings. When I looked at the adapter in device manager I found an error code 52 which disappeared after I re-installed the driver.
-Re-installed the client for windows networks installed for the adapter which did not make a difference.
-Temporarily turned off my AVG-free anti-virus which did not make a difference.
When looking at the adapter after clicking change adapter settings in the networks and sharing center it says it's not connected, but as stated above it doesn't show any networks to connect to.
Also, when I try to use the networks diagnostics tool I get the following error message:
Windows cannot find
'::{26EE0668-A00A-44D7-9371-BEB06...\resultPage?keywords=+Network;NetworkDiagnostics'.
Make sure you typed the name correctly, and the try again.
Any possibly solutions I've not already tried are welcome. Thanks in advance for any help.

Hi,
Locate to Services and check all services relating to wireless and network are enabled: Wireless Zero Configuration and WLAN AutoConfig, etc.
Also, make sure your NIC is working correctly from device manager.
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=108496d0924847afaf9c4a7bb72110b5_5646.xml&pid=80&converted=0
Have you tried manually connecting to wireless?
http://kb.linksys.com/Linksys/GetArticle.aspx?docid=8fd9ee85a0bf42f0986ed23390be8c66_19850.xml
Andy Altmann
TechNet Community Support

HT4259 Airport Utility 6.1 does note show "extend wireless network" option. How do I find the feature

I have an airport extreme and the utility is 6.1. I also have an airport express. I'd like to use the airport express to extend the WiFi. The "extend the wireless network" option does not show up in the Airport Utility 6.1. How do I go about finding that option? Is it something that doesn't need to be checked in Airport Utility 6.1?

I'm having the same issuse, the only work around I have found is by using an older version of airport utility
AirPort Utility 5.6 for Mac OS X Lion
http://support.apple.com/kb/DL1482
Hope that helps

HP LaserJet 1320 Not Showing Up On Network

Similar Messages

Maybe you are looking for