HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

I can't get my HP Laserjet 1320 to print in color any more. Changed the cartridge. I'm on Windows 7, 64 bit, but the issue started before the upgrade to Win 7. I can't even find the selection for color vs black and white printing.

The LaserJet 1320 printer is a monochrome printer, not a colour printer.

Similar Messages

Hp 5510 won't print black before and after installing new cartridge. have done specified checks.

HP Photosmart 5510 won't print black before and after installing new cartridge. Have done specified checks.

sueali301 wrote:
Been through all steps. Cannot find levers.The printhead on the Photosmart 5510 is not removable. For the Photosmart 5510 the troubleshooting steps in the document here may help. Especially make sure the vents are cleared. If that does not resolve the issue then resetting the printer as described in the post here may help. If this does not resolve the issue then read the entire thread here and try requesting reset instructions. If your printer is under warranty I suggest you contact HP for warranty service. If you are in the US call 1-800-HPINVENt, elewhere see the contact information here.

HP Laserjet 2550L Won't Print In Color

I recently upgraded to Leopard, and now my HP Laserjet 2550L will not print in color. I've tried printing for several different apps, but they always come out in b & w. It does however print in color when printing a test page from the printer itself, so it must be a driver issue.
Currently I'm running with the "HP color Laserjet 2550 series" driver available via PPDPicker. I've also tried several other drivers listed there to see if by chance one of them would work, but to no avail. I downloaded and tried installing HP Laserjet v5.5.2.051 from HP's website, but I can't get it to install. Actually this driver doesn't even show up in PPDPicker, because for some reason it saves as a text file, which seems weird since the dmg file is about 17mb.
Anyway, this has been driving me nuts all night, so if anyone has a solution or suggestion, I'm all ears.
Thanks.

I see you are having a print quality issue, no color on page, with your M251nw Laserjet. You changed the toner cartridges and the printer is still not printing in color. Have you tried taking all the color toner cartridges out of the printer and reseating them to make sure they are secure in their positions?
As well, I would advise taking a look at the document linked below. It will walk you through the process for troubleshooting a print quality issue with this printer.
Troubleshooting Print Quality Issues
Let me know the results.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP Color Laserjet 2605dn - won't print in color

I have an HP Color Laserjet 2605dn printer and recently purchased a new computer with Windows 7. Our IT dept. installed an updated driver (HP Universal Printing PCCCCL 6) but now my printer will not print in color nor can I find a setting where I can adjust it.
I also cannot duplex but found helpful post that I will use to try and correct that issue. If you can help me I would appreciate it. IT seems to busy to help and my work involves a fair amount of graphics so I need my color.
Thank you!!!

This post may be old but someone might use it later. Right click on the printer and go to properties. On the General tab go to printing preferences. (Windows 7- double click printer, click Adjust print options.) Advanced tab - expand Graphic, under Image Color Management change: ICM method to ICM handled by printer or host system. Apply and close out the windows. Run a test print to make sure it works.

HP Laserjet m251nw - won't print in color

I am not able to print in color to my hp m251nw.
It has been about a week since the problem started.
I replaced all the color cartridges as they were low. Now, no matter what device I use to print - laptop, mobile phone, etc. it always comes out in black and white.
On the printer control panel it shows all the cartridges as being full.
Even when I print the test page on the printer it is in black and white.
HELP????
I tried uninstalling and reinstalling the printer. I downloaded all new drivers from the HP website.
I'm at a loss on this one.

I see you are having a print quality issue, no color on page, with your M251nw Laserjet. You changed the toner cartridges and the printer is still not printing in color. Have you tried taking all the color toner cartridges out of the printer and reseating them to make sure they are secure in their positions?
As well, I would advise taking a look at the document linked below. It will walk you through the process for troubleshooting a print quality issue with this printer.
Troubleshooting Print Quality Issues
Let me know the results.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Color laserjet CP1525nw won't print in color

I installed both the PCL6 and PostScript drivers on my Surface Pro 3 to print to my Color LaserJet CP1525nw. The printer is connected to my router. The printer prints but only in grayscale. What can I do to be able to print in color and continute to print through my router?
This question was solved.
View Solution.

Hi @PaDunc ,
I see that you are experiencing issues printing in color from the printer connected to the router. I would be happy to help you.
Please clarify, if the printer is connected to the router by a ethernet or USB cable?
Did you install just the Universal Print Drivers or did you try the Full Feature Software also?
I would recommend the Full Feature Software if that isn't one of the drivers you have already tried.
Try and print the Supplies Status page to see if you have color, just to rule out a hardware issue.
Printing or Viewing the Supplies Status Page.
Make sure the greyscale option isn't enabled in the print driver.
1. From Devices and Printers, right click your printer.
2. Then click the Printer Properties, Preferences button.
3. Click the Color tab.
4. Make sure Print in Grayscale isn't checked.
Did the colors print?
What are the toner levels?
Are you using Genuine HP Toner?
Try these steps in this document, to see if it will resolve the issue.
Resolving Print Quality Issues.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet 2605dn won't print in color

System running Win7-64bit, driver is Univ PCL6 v5. Have tried to print from Outlook, Word, IE, Paint and only get greyscale. Have checked the styles in Outlook and not checked for grey. Also have a Photosmart C7280 and it prints in color fine. Both are connected USB. Not sure what to check now.
Thanks in advance,

System running Win7-64bit, driver is Univ PCL6 v5. Will print photos in colour but will only print word documents in black and white, tried everything, any more suggestions.

Pixma ip 1500 does not print in color even with a new cartridge

Put in a new BCI-21/24C color cartiridge. The printer will not print in color. I have cleaned the nozzles, run alignments, etc. Any ideas?

Hi Rickvid,
If the cleanings and alignments did not get the ink to print, the printer will require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Laserjet 2605dn - Won't print the color RED

My 2 year old 2605dn is acting up. When I try to print a test page made up of several colors the color red comes out orange on the left side and fads to yellow on the far right side. I have changed the toner cartridge (all cartridges are HP, no knock offs or refilled cartridges, EVER!), but the problem still exists. I printed the supplies status page and the red column shows a full cartridge but the color is a pale pink, not red.
Can someone tell me what's going on?
Is the printer failing?
Can this problem be fixed?
Thanks for any help!

Here is what to do:
http://www.reeves-hall.net/wp-content/uploads/2008/02/Fading-Red-Tones-on-Color-LaserJet-2600s-by-Do...

Laserjet 1320 won't print from ePrint

I just downloaded ePrint to my iPad 3 and it instantly recognized my older HP 1320. It appears to process the document, but nothing actually prints.
Any suggestions?

Hi elwo,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Re: hp 5510 won't print black before and after installing new cartridge. have done specified checks

I've followed all of the instructions and still no luck...what's worse is that I can't seem able to PM you for help. Please get back in touch with me as I would like some sort of remedy.

Hello Redwing1991,
Welcome to the HP Support Forums! I see you are running into some print quality issues on your HP Photosmart 5510, you are unable to print in black ink.
I see you have tried ALL steps listed here: Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages, with no success.
Please note: There are three printhead cleaning stages. Complete all three stages if necessary. If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes after the last (third) cleaning stage to start the first stage of the cleaning process over again.
I suspect the issue may be the printer and not the cartridge. Please let me know which Country/Region you are in as well as the product Warranty status: HP Warranty Checker
I hope to hear from you soon.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

C309a black ink won't print - just put in a brand new cartridge

I have gone thru all instructions on how to make the ink print but nothing is working. It is printing but it is so faint you cannot read it. I went thru the set up and cleaned the print heads twice. I have reinstalled the print cartridge many times. I checked the vent and it looks OK. Still will not print. Next step in the instructions is to replace the printhead. Not sure if that is worth it?? It is no longer under warranty so do I just need to bite the bullet and get a new printer???

If the troubleshooting steps in the document here do not resolve the issue the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

CP2025dn won't Print in color after downloading Windows 10

I recently downloaded Windows 10 on my laptop (ASUS) and now My Color Laserjet CP2025dn won't print in color. Yes, I have already quarduple checked that it's marked to print in color. I tried printing from Powerpoint, Adobe, and Word. No luck. I also tried to download some drivers but it still won't work. It seems to be printing in black and white just fine. Please help as soon as possible. I have some very important things to print off.

I just tried printing from my friends Laptop, she still has windows 8, and it's working fine, so I know this is a windows 10 issue, can someone please help me with this?

HP Color Laserjet 2605dn won't print the red color

My HP Color Laserjet 2605dn won't print the red color. It's comes out very light, barely a pink color. It's not the ink cartridge because it's full and I'm having this problem even when I change cartridges.

Hello dp146,
I understand your concerns. Unfortunately, I need to direct you to our Enterprise Business Community Forums.
This will be the right section to troubleshoot this issue.
Good luck.
I worked on behalf of HP.

LaserJet 1020 won't print first document after powering up

My LaserJet 1020 won't print the first document it receives after powering-up. Print manager shows that the document is being sent, the printer makes noise like it's getting ready to print, but the document is never printed and I don't receive an error messages. If I send the document again the document prints as does every document there after.
I'm using Windows Vista Professional and the printer is connected via USB 2.0.

Hi jnickelsen,
I understand the printer won't print multiple copies.
Thank you for your reply.
I will be happy to help you with this.
This printer doesn't have the Mopier settings.
What drivers are you using?
Did you download the drivers or are you using the Windows preinstalled drivers?
If you are using the Windows preinstalled drivers then I would download the latest drivers. Here is the URL for the HP LaserJet Full Feature Software and Driver.
I would download and run the Print and Scan Doctor since it might resolve the issue automatically.
Find and Fix Common Printer Problems Using HP Diagnostic Tools for Windows.
Hope this helps.
Thank you for posting on the HP Forums. Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet 1320 won't print in color (Win7 64 bit, new cartridge)

Similar Messages

Maybe you are looking for