HP laserjet 1536dnf - Automatic answer mode stopped answering

When my printer was installed and I set up incoming faxes for automatic answer mode at 5 rings, it worked great for about 2 weeks then stopped answering. Now the only way for me to receive faxes is manually. Does anyone have any suggestions? I am currently using a dedicated fax analog line.
Thanks

Welcome to the HP Forums jmaz1028,
I see by your post that the printer stopped auto answering the faxes.
I can help you with this issue.
I would do a power reset to see if that will resolve the issue.
With the printer still turned on, disconnect the power cable from the back of the printer.
Then disconnect the power cable from the wall outlet.
Wait 10 seconds and reconnect the power cable back to the wall outlet first, then the back of the printer and power it on again.
Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector)
Update the printer's firmware.
HP LaserJet Pro M1536dnf Multifunction Printer Drivers.
Select your operating system, click next, click the link for firmware.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Similar Messages

  • HP LaserJet 1536dnf MFP document feeder stopped working

    The document feeder stopped working.  It clicks when trying to feed and comes up with the error Document Feeder Mispick, reload.  I cleaned the feed rollers as per the HP video, no change.  Is this something I can easily fix myself  (I can open screws and lubricate parts if necessary)?  Any suggestions?
    Thanks.

    Hi @Solray,
    Welcome to the HP Forums!
    I noticed that your document feeder has stopped working on your HP Laserjet 1536dnf MFP printer.
    There are two guides available that you can follow:
    'Document feeder mispick' Message Displays on the Control Panel and the ADF Does Not Pick Up Paper o....
    'Doc. feeder jam', 'Open door and clear jam', or Other Jam Message Displays on the Printer.
    If you have done all those steps already, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope these guides help, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • BT3510 answer machine stopped answering

    Hi, my BT3510 stopped answering calls last week after approx 2 years of working fine.
    I thought it odd that it had failed after such a short time but as we were happy with that design I simply bought an identical replacement 3510. I installed it last night & its doing exactly the same, as in not answering calls. I have checked the settings & tried different answer delays, no change.
    Then i remembered that i renewed my contract last week & now wondering if this is just a coincidence or has something been changed on the line that is stopping the answering machine answering.
    can anyone help ?
    thanks,
    Dave.
    Solved!
    Go to Solution.

    Hi Dave635,
    Thanks for posting and welcome to the forum.  Is your phone ringing when its called and can you making outgoing calls or is the problems specific to only the answering machine?
    I've found the user guide that explains how you make sure the phone is set to answer calls. If the problem is only with the answering machine there is a helpdesk number listed on the user guide and they should be able to help.
    Cheers
    Neil
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • When i cancel one dvd recording the windows stop answering....

    ... And the dvd dissapear..... FOREVER!
    I Tryed this:
    -Click on the cancel button -Then the window stop answering and didnt even stop recording my dvd-
    -Reinit the finder... NO WAY. Do not run
    -Force the end of the finder process... NO WAY... Do not run
    -Reinit the computer....Well then the dvd is not there!!!!!! on the finder!
    I wonder how can i "mount" the dvd when is not visible on the finder
    Now i think you can access the unit with the disks utility... but this is one "arcane" place to find your dvd... I am sure many users never ever opened that tool
    Can i mount the dvd from the UNIX shell? -sh-. Anyway this is not a good solution for the average user BUT COULD be ok for me
    ... And reinit the computer is not a "nice way" as well
    Thank you for reading my long post
    Bruno

    hello xbxjnky, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Illustrator stop answering and quiting when trying to save

    My illustrator CS6, for a reason i'm not able to locate, is not able to save files in an ai format. It stops answering and then finally quit.
    It seems to happen when the file is containing other formates like jpeg, dwg, pdf, png etc. when i'm only drawing in illustrator it is able to save.
    I have twice rebooted my system after trying every suggestions i could find online, like updating etc. It seems to fix the issue for a time, but then after some time it just stops functioning, I consider it a very bad solution to periodically reboot my system.
    One clue i have is that it might be a conflict with the microsoft visual C++, because the error seems to appear after using comuter games which installs microsoft visual C++. But reinstalling either Illustrator ot microsft visual C++ don't solve the problem.
    Finally it might be a problem with windows 7, but i can't see a way to fix it and it's works fine when my system is freshly rebooted.
    Hope someone can give me a clue as how to solve this problem, because it's very frustrating.
    Best Regards Christian.

    Sorry for being vague, I was a bit frustrated myself with the lack of information from windows. But using your link I have found this information:
    OS-navn     Microsoft Windows 7 Home Premium
    Version     6.1.7601 Service Pack 1 Build 7601
    Anden OS-beskrivelse      Ikke tilgængelig
    OS-producent     Microsoft Corporation
    Systemnavn     ------------------
    Systemproducent     Acer
    Systemmodel     Aspire V3-571G
    Systemtype     x64-based PC
    Processor     Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz, 2301 Mhz, 4 Kerne(r), 8 Logisk(e) processor(er)
    BIOS-version/dato     Acer V1.07, 11-05-2012
    SMBIOS-version     2.7
    Windows-mappe     C:\Windows
    System-mappe     C:\Windows\system32
    Startenhed     \Device\HarddiskVolume2
    Landestandard     Danmark
    Abstraktionslag for hardware     Version = "6.1.7601.17514"
    Brugernavn     ------------------------
    Tidszone     Rom, normaltid
    Installeret fysisk hukommelse (RAM)     8,00 GB
    Fysisk hukommelse i alt     7,84 GB
    Tilgængelig fysisk hukommelse     5,15 GB
    Virtuel hukommelse i alt     15,7 GB
    Tilgængelig virtuel hukommelse     12,5 GB
    Plads til sidefil     7,84 GB
    Sidefil     C:\pagefile.sys
    Navn på program med fejl: Illustrator.exe, version: 16.0.0.682, tidsstempel: 0x4f6e45b7
    Navn på modul med fejl: AGM.dll, version: 4.26.20.19822, tidsstempel: 0x4f5692e1
    Undtagelseskode: 0xc0000005
    Forskydning med fejl 0x00000000002b05d2
    Proces-id 0x1bb8
    Programmets starttidspunkt 0x01ce21dc775c6d3b
    Programsti: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\Illustrator.exe
    Modulsti: C:\Program Files\Adobe\Adobe Illustrator CS6 (64 Bit)\Support Files\Contents\Windows\AGM.dll
    Rapport-id: d277a417-8dcf-11e2-ae00-b888e3096996
    It's in danish, but the problem seems to be the AGM.dll file

  • Why one stop answering user's request where the other down ?

    We build a rac system with two nodes,the oracle version is 9.2.0.3.
    While one machine break down suddenly, the other machine stop
    answering user's request untile 2 minutes later? We cannot understand
    this , which doc describe this situation?
    I think while the nodes two break down, the user's connected to this
    nodes will wait until fail over to node1, but with user's who has
    connected to node one, or user's who want connect to node1, their work
    will not be stoped. Is this right?

    Hi,
    When NSLOOKUP starts, before anything else, it checks the computer's network configuration to determine the IP address of the DNS server that the computer uses.
    Then it does a reverse DNS lookup on that IP address to determine the name of the DNS server.
    If reverse DNS for that IP address is not setup correctly, then NSLOOKUP cannot determine the name associated with the IP address.
    http://support.simpledns.com/kb/a90/nslookup-cant-find-server-name___-default-server-unknown.aspx
    Also refer to:
    How to fix NSLOOKUP Default Server: UnKnown?
    http://www.randika.info/2013/01/how-to-fix-nslookup-default-server.html
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Stop answer-on-slide

    I've got a N80 which is about 20 month old. At the begining answering the call on sliding worked properly and did not cause any problem. But then eventually the mechanism loosened up and any time I dig out my celly from the pocket it answers the call by itself and sometimes ends the talk.
    Is there any way to stop "answer-on-slide"?
    Thanks in advance.
    No magic but the trance. 130-140 bpm 4 life

    You can download the N80 Manual here.
    http://www.nokia.ie/A4202116
    As far as I know, you cannot turn off this function on the N80.

  • When I start syncing photos that I previously removed from my iPhone, iTunes stop answering.

    I'm trying to sync photos that I removed from my iPhone back to it, via iTunes. It does contain some videos that I took too, it syncs the photos but when it's time to transfer the videos, iTunes stop answering.
    Please help!

    I'm with you! I have 4 "Albums" on my phone, and two of them I don't get an option to delete. When I hit "Edit" it's litearly "edit" like redeye and such. And if I hit the little "arrow" that usually gives you more options, the options are to share to facebook, twitter, print, etc. It's taking up a lot of space!

  • HP Laserjet 1536dnf MFP Installation Error

    I have an HP Laserjet 1536dnf MFP printer which will not install.  I originally had Windows 7 OS and got the HP 1536dnf printer which installed fine.  However, I started getting the upgrade to Windows 8.1 pop-ups, which I avoided specifically.  However, I was typing on day when it poped-up to upgrade and didn't catch it in time and next thing I know we are upgrading to Windows 8.1 OS.  What I didn't notice immediately after the upgrade was that my printer began to have trouble.  So I uninstalled the printer and went to reinstall it from the disc and HP download, but it never re-installed. It always stopped at 99% and then gave a time error, something about to long to execute program timed out.  I went to HP support via chat and wasn't able to get it resovled.  However, I did somemore digging on the internt and found other people were having similar but different issue.  Long story short, the Event viewer stated faulting application is PrintIsolationHost.exe and the faulting module name is hppdcompio.dll.  What is this and is there anyway to get a newer version or replace the old dll with another one of the same vintage?  I would like to get my printer fully installed so I can use all the functions again.  I am currently using a default driver.  Any help would be greatly appreciated.  Thanks.

    Hi wiserichguy ,
    Thanks for providing that information.
    In Desktop mode, press the Windows key and R at the same time, to show the run command line.
    Type Services.msc and press Enter on the keyboard. 
    Scroll down until you see Windows Image Acquisition (WIA) and select it.
    Make sure the service is started and set to Automatic.  If the service is already started, stop the service and start it back.
    Scroll down until you see Shell Hardware Detection and select it.
    Make sure the service is started and set to Automatic.  If the service is already started, stop the service and start it back.
    Scroll down until you see Remote Procedure Call (RPC) and select it.
    Make sure the service is started and set to Automatic. 
    Close the Services window.
    In desktop mode, press the Windows key and R at the same time and  type Services.msc.
    Double-click Printer Spooler in the Services list.
    Click Stop and click OK.
    Navigate to "%WINDIR%\system32\spool\printers" from the Run Window again, right click on any document and left click to delete the job.
    Then go back to the Run Window and type in Services.msc again.
    Double-click Printer Spooler in the Services list.
    Click on Start. In the Startup Type list, make sure that "Automatic" is selected and click OK.
    Try updating the driver again.
    How was the printer name listed in Device Manager?
    Please let me know the outcome.
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP laserjet 1536dnf MFP keeps Printing

    Hi Admin,
    I currently work as an IT Entry Level Support, and I have a problem with HP laserjet 1536dnf MFP  that I cannot give time to figure out why.
    Here's what I have:
    System: WXP Pro v2002 SP2
    Hardware: HP laserjet 1536dnf MFP
    Device Manager Driver: HP LJ M1530 Series Scan ; Driver Date: Nov 16, 2009
    HP laserjet 1536dnf MFP keeps printing JZJZL() and different Random Garbled characters, I can only print properly if I switch it on and Turn it on again.
    One more question: Is there a way to stop whatever is printing from the HP Toolbox.
    Thank you..
    This question was solved.
    View Solution.

    Hi @Claude-Antoine, 
    I understand that the printer is printing garbled print and something keeps printing off from the Toolbox. I can help you with this.
    Most likely the driver is corrupted and you will have to uninstall and reinstall the printer software.
    If you can print the hardware self test page properly, then it would be a software issue.
    Printing a Configuration Report.
    I have provided a document with some steps to try to see if that will resolve the issue.
    Resolving Strange, Garbled or Illogical Text, Incomplete Printouts, or Missing Text or Graphics.
    Here is the link for the newest drivers. HP LaserJet Full Feature Software and Driver.
    How is the printer connected? (USB/Ethernet)
    If your networked, do you have a Static IP setup and what kind of router are you using?
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • [Solved] Hp Laserjet 1536dnf MFP only software

    [EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.
    Hello,
    My uncle has Win 7, Ultimate, 64 bit (updated to latest windows updates)
    installed via bootcamp on iMac
    Have HP 1536dnf MFP printer installed via USB. No other HP product is installed.
    I had issues which I managed to solve.
    Problems:
    Earlier the 'properties' window flashed and closed immediately. I could not solve the problem even after trying solutions offered in earlier posts. After few install, my installer would fail as it stalled at 99 %. Even if I killed installer via task manager, still I could not find any solution. HP toolbox FX could not be installed.
    As usual, I removed all HP driver enteries from
    services tab,
    device manager and
    somewhere in 'printers and devices' (afte rclicking / selecting any printer, on top bar, ther is an option to select driver).
    I also removed HP folder form 'Programs x86' (my system is 64 bit). In programs folder, I found nothing.
    I also checked for universal printer is uninstalled and
    print sprooler is working and is set on automatic.
    I had also upgraded firmware to latest 2014 version.
    Windows update of 1536dnf always failed.
    I run latest al-in-one installer from HP (210 mb)
    All-in-one installer ...
    With installer windows installer also installs software. I clicked on taskbar icon to see details. It searches for latest drivers of scan, print, etc on net and then installs it.
    After 26-29 % HP installer, searches for 1536 printer driver (it can be seen on windows installer screen). When the installer reaches 29 %, it says
    Installation failed. Messege is something like
    Installation of HP Laserjet 1536dnf failed.
    I kept the installer running. After it reaches 99 %, it hangs. After few minutes, it shows fatal error. I ended installer via talk manager, still software is not installer.
    HP diagnostic tool identifies printer, but says, software is not installed and points downloads page, which is not of HP 1536dnf MFP.
    There is one solution, which I have not tried. One post said to create a new user.
    Half Solution:
    Then I tried basic setup of print and scan driver PCL 6 without first installing software (which is latest available on HP website 2011 version) and ... it worked. Now I can print and he properties tab would open.
    Also note that this is a 'universal Printer driver'--> all were suggesting that universal printer and print spooler causes problems
    Still it's working fine, but without the software I cannot scan. I do not use photoshop.
    Question:
    My question is
    The 210 mb installer will again install drivers. What will happen as in this case, I have already installed drivers and are working fine, but as mentioned, I cannot scan. HP scanning software gives good options.
    Is there version available where only software is installed and no driver is installed.
    Since 210 mb all-in-one installer always hangs at 99 % (downloaded 2 times and installed 7-8 times), should I try basic installer.
    What will happen to preinstalled drivers?
    The problem is that installed driver is a universal printer PCL 6
    I will again visit my uncle on saturday.
    Please help me. Thanks.
    Kind Regards
    White Lotus (WL)
    This question was solved.
    View Solution.

    [EDIT] The issue is solved. My uncle called someone to fix the issue. He deleted one more printer related additional file. Unfortunately I do not have the name. After that he downloaded all-in-one file and succesfully installed printer. Sorry for the trouble.

  • 'unable to send print data' on HP Laserjet 1536dnf MFP

    Hi there,
    I'm running an iMac with OSX 10.6.8. Via an USB cable I have attached a HP Laserjet 1536dnf MFP to the iMac.
    I also use this printer to print via wifi (i.e. through the iMac) with my MacBook Pro (with OSX 10.7.3).
    Suddenly today the printer stopped working via my MacBook Pro. I get an error message: 'unable to send print data'.
    I have checked my antivirus etc., but that does not appear to be the problem. I have also updated the firmware of the printer, without success.
    Can somebody help me out? Is the OS difference the problem? But until today that hasn't been a problem.
    Thank you very much! Regards, Luc.

    Hi jemenake
    I understand you lost connection with the network for the Laserjet 1536 through ethernet connection.
    Disconnect the routers power cable, wait 10 seconds, then reconnect the power cable. Wait till it's ready. The router might not be finding the printer on the network.
    If this doesn't resolve the issue continue to the next steps.
    Print a  configuration report from the  LaserJet 1536dnf.
    Press the Setup button, (the one with the wrench on it)
    reports, press OK, Config Report, press OK.
    Check to see if the ip address is valid.
    If you have a valid ip address then delete and add the printer on the mac, the driver might have become corrupted.
    Delete printer on mac.
    Click on the Apple, click System & Preferences,then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),highlight your printer name and click the  button on the bottom left corner of the screen.
    Add printer on the mac.
    Click on the Apple, click System & Preferences, and then click the Print & Scan icon (on some systems this may be displayed as Print & Fax),click add a printer, then select the printer from the list, make sure the printer listed beside use or print: shows proper printer name and not airprint, (airprint is a preinstalled apple driver with basic funtionality if on 10.8) add it in.
    If the ip address is not valid please let me know.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP Laserjet 1536dnf MFP Scanner won't Scan

    Respected Sir
    i have HP Laserjet 1536dnf MFP All in One. its printer is working fine but scanner wont scan not from glass nor from ADF.
    when i install on new pc its works but after some days its stops scanning and then never scan again until you reinstall oerating system
    so kindly suggest ,,, i try many time by reinstalling drivers but scanner give error on scanning

    Hello ITEngineer,
    Welcome to the HP Support Forums!
    Regarding the LaserJet 1536 not being able to scan, I would like to try and help. When you try to scan what is the error? Also, what is the Operating System installed on the computer, Windows or Mac?
    Is the connection Ethernet or USB to this computer? If you are using a Windows Operating System try running the Print and Scan Dr. This could help identify the root cause of the issue.
    Reply back with the results of the Print and Scan Dr please as well as the other questions and I will do my best to help.
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Bedside Mode stopped working / Clock won't kick in while charging

    Hi,
    I recently updated from the earlier factory installed 5.0 version OS to the latest one in my 8530. Every time I connected my BB to my computer the BB manager outputted an immense list of  updates to be done so finally I did.
    Now Bedside Mode stopped working automatically. I'll explain, when I plug in my phone for charging the clock will not kick in and start Bedside Mode even though it is selected in the clock options settings. Instead I have to manually start the clock and then select Bedside Mode from the menu.
    Basically is not just the Bedside Mode is the clock all together because if I select just  Display Clock the same thing will happen, when I plug in the phone the clock won't kick in.
    Meanwhile if I have the phone plugged in and I select Bedside Mode, when I exit the options screen after saving, it will start bedside mode.
    And the same thing happens in reverse, if I unplug the phone while in bedside mode, it won't stop, I'll have to manually exit the mode and the clock.
    Any advice?
    Did I miss to check something in some other settings screen?
    Can the clock be reinstalled?
    Is someone out there with the same problem?
    I need HELP PLEASE!!!

    Hi again
    This problem started with an update. I suggest repeating the update:-
    This what I did to completely wipe my BB. I wrote this before starting and printed it off.
    If your device is functioning, perform a backup now if you haven't already done so saving the file to a place and in a name that you can easily locate on computer.
    I then uninstalled DTM and then deleted all other references to BB/Rim in Windows Explorer thus removing the OS for the BB from the computer in order to ensure that the version I would reinstall would be a brand new downloaded version.
    Get the latest Desk Top Software
    http://us.blackberry.com/apps-software/desktop/?CPID=OTC-DSKTPSW&cp=OTC-DSKTPSW
    and install it on the computer.
    Get the correct latest version of the OS
    http://us.blackberry.com/support/downloads/download_sites.jsp
    and save it to computer.
    To erase all the data on your BlackBerry device, complete the following steps. This option is available with
    BlackBerry Device Software 3.8 and later.
    1. In the device Options, click Security.
    If you are using BlackBerry Device Software 4.1, click Security Options > General Security.
    2. Click the trackwheel and select Wipe Handheld.
    3. Click Continue.
    4. Type “blackberry”. All the data on the BlackBerry device is erased.
    On some new versions of BlackBerry software, the menu navigation is slightly different.
    1. Go to Options.
    2. Select Security Options.
    3. Select General Settings.
    4. Click the Menu key.
    5. Select Wipe Handheld.
    6. Click Continue.
    7. Type “blackberry”. All the data on the BlackBerry device is erased.
    Launch the new Desk Top Software on the computer
    1. Connect your device to your computer.
    2. On the home screen of the BlackBerry® Desktop Software, click Update my device.
    3. Do one of the following:
    * To download an update, click Get update.
    * To view other available versions of the BlackBerry Device Software, click View other versions. If applicable, click another version. Click Install.
    Ensure the new OS is the one you prevously downloaded.
    Do not disconnect the device until the whole process is completed and the device has rebooted.
    After 10 minutes reboot again by removing the battery whilst powered-on and leave it out for a couple of minutes.
    Leave it again for 10 minutes. You should now have a fully functioning BB!
    Blackberry Best Advice - Back-up weekly
    If I have helped you please check the "Kudos" star on the right >>>>

  • Laserjet 1536dnf MFP "Update"

    I'm getting a suspicious-looking pop-up.  It doesn't use the HP logo, but implies that I need a software update for the only HP equipment I have--the Laserjet 1536dnf MFP.  Last week something like this popped up and I followed along and the malware took over my web browser amonst other changes.   Blue bar says, "HP Update"  the message then reads, "An update is available.  Would you like to download and instal this update now?"  Finally, there are three option buttons: Continue, Cancel, & Settings.  No "X" box to close the window, and it persists at staying on top of other applications on my desltop.  What's the best thing to do?

    Hi there,
    HP does indeed have a utility called HP Update.  It automatically notifies you when updates are available for your HP products.   Does what you are seeing looking similar to this?
    If you don't want to use the HP Update tool, you can easily turn it off.  Just open HP Update (you should be able to access it by going to your Windows Start button, and then selecting HP Update, or it might be under Start --> All Programs --> HP --> HP Update, or you can just wait for it to pop-up again).
    Once HP Update opens,  click on the Settings button (bottom left) and change "Check for software updates on the web" to Never.
    And you will no-longer receive these pop-ups/notifications.  Hope that helps!
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

Maybe you are looking for