HP LaserJet 200 color MFP M276nw - cannot connect

Hello,
Installed a HP LaserJet 200 color MFP M276nw on a Windows 7 system with no issues. Then added the "device" / printer on two Windows tablets, with no issues. I was able to print from all three devices. The tablets cannot 'find' the printer.
I then added the printer to another Windows 7 system and now cannot connect from the other systems. I am still able to print from the second Windows 7 system. (I removed the printer from the second Windows 7 system and readded it without issue, and ensured Share the Printer was selected).
Please advise. Should I just return the printer?

Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): xxxxxxxxx
Communication Mode: Infrastructure Authentication
Type: wpa2-psk
Encryption: tkip+aes
Hardware Address: xxxxxx Access Point Hardware Address: xxxxxx
Channel: 6
Signal Strength: Very Good
***Marked out some of the settings***

Similar Messages

Hp Laserjet 200 Color MFP M276nw Fax error report

Hi Team
Will you please assist me in turning off , Fax error report ?
I have checked all the settings on this machine , i cant't find this setting, i want to turn off the error report on failed/error
faxes.
Regards
James R

Hi JamesR25,
Welcome to the HP Support Forums! I see you would like to turn off the Fax error reports on your HP Laserjet 200 Color MFP M276nw.
From the front panel of your LJ, please follow the path below:
Setup Menu > Fax Setup > Advance Setup > Allow Fax Reports > NO or Off
You should not receive anymore fax error reports.
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP Laserjet Pro 200 color MFP M276nw, cannot air print

Madam/Sir,
How do I install air print on my HP Laserjet Pro 200 color MFP M276nw so that I may print using my apple devices (ipad, iphone). Currently I can only print through wireless connection which is 'moody' - doesn't print at times.
Regards
Rahul

Hi,
It supports AirPrint as shown:
http://support.apple.com/kb/ht4356
Please read on the first page of the above link:
How to print in iOS
You can print from Apple apps like Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, and more. Many apps available from the App Store also offer this feature.
To print, follow these steps:
Tap or at the bottom of your screen.
Tap .
Choose your printer, the number of copies you want, and then tap Print.
Make sure that you are on the same network as the AirPrint printer that you want to use. All AirPrint-enabled printers on the same network should be displayed, including those that are properly configured for a Wide Area Network (WAN).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP LaserJet Pro 200 Color MFP M276nw: cannot install on Windows XP Professional 64-bit

Hi all,
I am trying to install (via USB) the printing driver for my HP LaserJet Pro 200 Color MFP M276nw printer, but my operating system is Windows XP Professional 64-bit, Service Pack 2. The installer stops with an error saying that the system is not supported. Are there any basic drivers available to fix this problem, or do I necessarily need to upgrade my OS?
Thank you,
Alessio

XP 64-bit is not supported. (see system requirements)
Now is a good time to consider a O/S upgrade because of the end of life come April/2014 for Windows XP.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Fax Problem on HP laserjet 200 color MFP M276nw

HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?

Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laserjet Color MFP M276nw Cannot connect to Web Services, tried every suggestion on forum

I've tried every suggestion possible on the forum. I opened up all ports suggested by HP support on my Belkin wireless N600 router. Changed DMZ to IP address on printer. We even directly wired ethernet to printer, still cannot connect to Web Services. Now I have to wait till April 4 for a engineer to call me back. Everything else is working fine. I can print wirelessly from my laptop & smartphone. Just cannot access Web Services, oh & firmware is up to date on printer & router. We changed DNS settings to 8.8.8.8 & 8.8.4.4.
This question was solved.
View Solution.

It sounds like you have done everything to connect the web services. Web services will not connect if you are on a guest network but if you are connected via ethernet it should be on the right band. What is the printer's IP address? Sometimes it can be too high. Is this for a company that has a proxy on the network? How far away is the printer from the router? Are there any metal shelves, wireless devices or anything else near the printer or between the printer and the router? Check that the router is on Channel 11.
--Printer Does Not Connect To Web Services--
Have you heard back from the engineer? I am anxious to know how it went. I am happy to help if they don't, otherwise keep me posted on what happens. I possibly have one more step for you.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Network Configuration for HP LaserJet 200 color MFP M276nw

Can the HP LaserJet 200 M276nw can be configured to scan to a network folder without initial set-up from a PC? Without the need of initially connecting the device to a computer first.
We are running a virtual environtment and the printer will need to scan to a configured network folder and this should be done via the device. Of course folder permisisons will be completed prior. I believe I saw a manual where the Embeded web server had this configuration, but would to make sure prior to committing to the purchase. Thanks in advance.
This question was solved.
View Solution.

You are gladly welcome.
Yes, the printer support the SMB protocol indeed.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 200 color mfp m276nw print black not grayscale

I'm told the printer will print even black-and-white documents using "grayscale," which I'm told means it is using the color cartridges even to print black and white documents. Is there some way I can change this so that it prints black and white documents with only the black ink cartridge? I'm using Mac.

Hi Balderol,
I understand you would like to print black only. I found a document that will help guide you through the steps to set your print settings. This document says it is for 10.3 an d10.4, but the instructions will apply to the newer Mac versions as well. Mac OS X: Printing with the Black Print Cartridge Only Option.
I hope this is helpful.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

LaserJet Pro 200 color MFP m276nw no network connection with Linksys HUB

Hello
I've setup my LaserJet Pro 200 color MFP m276nw to connect to my home network using a wired connction.
When connected directly to my router the connection initializes and successfully recieves an ip address. I've been able to access all the network function connected to my router directly either wired or wirelessly.
I also have an old Linksys hub and when the printer is connected to the hub, it does not initialize the network connection. The hub works with every other sevice in my network, including a few game consoles and a Mac Mini.
Is there an advance network setting I should be looking at?
Thank you
This question was solved.
View Solution.

Hi,
Remove any wired connection before attempting to connect via wireless.
Print off the printers network configuration and check the settings against your routers settings.
Ensure that router and printer are using the same frequency.
Review this HP posted information once you have the above information in hand.
This information might also be helpful.
Review page the wireless setup information starting on page 115.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Win XP 64 driver for hp laserjet pro 200 color mfp m276nw

Hi, any workaround for using this printer under XP-64?
Maybe driver rename or compatible generic?
Just bought it, unpacked, connected - and found out that XP 64 is not supported.
Now what? Return in disgust and buy Cannon or Minolta again, as they support all OS?

Hello sangamon,
Welcome to the HP Forums!
I understand you're looking for a Laserjet 200 color MFP m276nw driver for Windows XP 64 bit. I will do my best to assist you! Have you tried downloading the full feature from the HP website here? This will support your operating system. Please let me know if you have any further questions.
Have a great night!
I worked on behalf of HP.

Bluetooth connectivity on HP Laserjet Pro 200 color MFP M276nw

Madam/Sir,
Is there bluetooth connectivity on HP Laserjet Pro 200 color MFP M276nw?
This question was solved.
View Solution.

Hello there,
I've looked up the specification sheet for you, and no, unfortunately there is no bluetooth feature.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=ca&dlc=en&docname=c03315988
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Hp Laserjet pro 200 color MFP M276nw

Im having an issue with the installation of the software and the scanning of the printer. When i try to do a full install it goes well up to the part where i have to reconnect to usb port to my computer, at that point the installation starts to go very, very slow. When it get to 99% it gives me a fatal error saying i have to restart my computor and do the process again. i have done it multiple times with no success. I followed by going online and getting the drivers from HP and did the installations individually. I am finally able to print. When i go to scan a documents i only get 3 options on the printer: scan to usb, scan to network and scan to wireless. I dont have anyother options and i have downloaded the drivers for the scanner. I dont know what to do anymore.
Thank you

Hi @HPuser84,
I will do my best to help you be able to scan with the Laserjet pro 200 color MFP M276nw printer.
There are only 3 options from the printer to scan to, scanning to PC isn't a option with this model, if you want to scan from the computer, you would have to use the HP Scan Software on the computer.
I have provided a document for how to scan through the HP Software and from the printer's control panel.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers.
Scan From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder) for HP Lase...
If the scanning software and drivers still didn't fully install and you had the fatal error again, uninstall the software.
Disconnect the USB cable first. Uninstalling the Printer Software.
Then start the installation again, immediately follow the steps in this document after connecting the USB cable please.
A Fatal Error Displays During Software Installation. Disregard the printer model. This should allow the software to fully install properly.
Please let me know if you require any additional assistance.
Have a fantastic day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw Wireless option is gone!!!

I have a HP LaserJet Pro 200 color MFP M276nw. The blue lit wireless icon used to stay on steady and all was fine for quite a while, then the Blue icon would start flashing like it lost it connection to the wireless router. I would just recycle the power on the printer and let it reboot. Usually it would connect with the router again but, it's been getting worse lately. I figured I would try to the latest firmware to the printer as maybe there was a clitch with the original firmware.........Well, now I get no blue wireless icon and the wireless menu disappeared from the touch screen. I tried to access the wireless settings in the web browser, the program said "this product does not support wireless connectivity.......WHAT?!!!!! I tried a "cold reset" on the printer to clear everything and still have no wireless option. I suppose its going to stick with the same firmware that was last installed. I did notice that the printer lists itself with an "N" at the end of the model # on any printed report instead of the "NW" its supposed to be. I did download the printer firmware from the Pro 200 color MFP M276nw support page. it's acting like it now has the firmware for the non-wireless version of this printer. This is the firmware I used
file name:
M276_colorMFP_Series_FW_Update-20140521.exe [1/1, 14.32M]
. Any Ideas how to fix this? Seems like this is the wrong firmware for this printer. Everything else appears to work ok.
Bob

****UPDATE**** After running a few copies through the printer the wireless feature showed up again. The printed reports started to show this printer with the "NW" at the end of the model number instead of just the "N". After a few minutes it all went away again. Seeing the correct model number show up for a few minutes made me believe the correct printer firmware is installed. To make this a short story, I ordered the wireless PCA assy (Small internal wireless circuit board, HP part #1150-7940) and replaced it. It's been working great for the past few days( since the board was replaced). Apparently, if the system does not see a working wireless board it defaults to the non-wireless model number and the wireless option disappears from the menu screen. The other thing is there apparently is no fault code that covers this type of failure.....frustrating, to say the least. I will update if this is not the fix but, it looks like I got it!
Thanks!!!!!!!
Bob

HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue.
Is there a way to check the status of the embedded web server through the control panel on the printer?
Are there any other steps we can take to restore the embedded web server?
Thanks in advance.

Hello csandrews68,
I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
I suggest restoring the network defaults on the printer:
From the home screen on the printer push Setup (wrench and gear icon)
Go to and select Network Setup
Push Restore Defaults
With defaults restored, connect the printer back to the network and try to load the EWS.
Let me know if that helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Laserjet Pro 200 color MFP M276nw

Can print all files except Adobe (PDF) which freeze the printer. Have downloaded all relevant new software and still does not work. Was able to print PDF files until recently when the problem started. Supplier has not been able to solve the problem and cannot seem to get hold of anyone at HP who can help us. Any ideas ?

Hi Mariners,
I understand you are having an issue with Laserjet Pro 200 color MFP M276nw and printing a PDF.
In order to assist you correctly I would need some other information.
What is the current OS on the computer?
What is the model number?
Have you installed the printer from the disc on the computer?
Have you done a firmware update with this product?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-3&cc=uk&dlc=en&lc=en...
Please feel free to contact me for assistance.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP LaserJet 200 color MFP M276nw - cannot connect

Similar Messages

Maybe you are looking for