HP Laserjet 2200 orange light is on and paper wont feed

HP Laserjet 2200
Windows 2000
Giving me no message on the problem but orange light is on by the triange with exclamation point
Acts as if the paper is having trouble feeding

Hi ialewis, 
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • I have an Ipod 4th gen. and when you plug it into the wall it is stuck on the charge/lighting bolt screen and it wont charge, and when you plug it into a computer (PC) the lighting screen wont even apear. Please help I have had this problem for forever.

    I have a ipod touch 4th gen and it wont chrage. When you plug it into the wall the lightniing bolt screen will apear but no matter how long you leave it, it will never turn on. Also it the lightning bolt screen wont even come on when you plug it into a computer (PC)..........PLease help its been like this for forever

    Hi Gammer576775!
    Here is an article that will help you troubleshoot this issue with your iPod touch:
    iPod touch: Hardware troubleshooting
    http://support.apple.com/kb/ts2771
    Will not power on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Connect the iPod touch to an Apple USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if the display turns on and…
    The home screen appears, the device should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen: . Then disconnect the device from power. If it immediately turns off, seek service.
    The low-battery image appears even after the iPod touch has charged for at least 20 minutes: See the "iPod touch displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or low-battery image appears , continue with this article for further troubleshooting steps.
    If the iPod touch did not turn on, reset it while connected to an Apple USB power adapter. If the display turns on, go to step 4.If the display remains black, go to the next step.
    Restore the device. Connect it to a computer and open iTunes. If iTunes recognizes it and indicates that it is in recovery mode, attempt to restore the iPod touch. If the device doesn't appear in iTunes or if you have difficulties in restoring it, see this article for further assistance.
    If restoring the iPod touch resolved the issue, go to step 4. If restoring it did not solve the issue, seek service.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Help - Green Light Started Flashing and it Wont turn Off

    Help - I have the Flip 8220 (Tmobile) and the green LED light just started flashing this AM and wont turn off - how can I fix this

    Hello,
    I believe you can turn off this light by following the steps below:
    1. From the home screen click Options > Screen/Keyboard options and look for LED Coverage Indicator. Make sure it is set to "Off"
    Hope this helps!

  • FRONT RED LIGHT IS ON AND IT WONT START UP

    on my ppc g5 the front red light above the power button and it will not start up.

    Soppose Air Deflector Sensor is something wrong.
    Just wonder if your PowerMac G5`s air deflector set in the right place...
    -- kaz-k

  • HT2827 i just updated my software for the apple tv and the light is flashing and it wont restart after update  thoughts?

    i tried to update my software for apple tv and it will not restart after update.  flashing lights

    Welcome to the Apple Community.
    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • Steady /constant orange light

    I have a 1Gb shuffle. Today, I charged it, when I unplugged it, the orange light stayed lit, and when I turn it off the orange light stays on for a moment or two, and then turns off.
    When I turn it back on again the orange light comes on again, and stays on.
    The shuffle will not play any music, and is not recognised by OSX or Windows.
    What do I do?
    I cant use the iPod reset tool, as its not recognised.

    I have the same problem. After charging, light stays orange, even when it it switched to the off position. Light eventually turns off after several minutes. Not recognized when plugged into various USB ports on various machines. I think it may be brick-ed.

  • Flashing orange lights between steady blue

    Hey guys!!
    I've had BT broadband for 18 months and never had any problems. BT home hub 2.0
    This morning, my internet was dropping (flashing orange lights on braodband and phone icons on the hub). I rang BT and they informed me there was an issue in my area and it would be fixed in a few hours.
    I never fully lost service...it just kept dropping out and flashing the broadband and phone icons orange and then reconnecting again and going to blue.
    I rebooted my router at the time they said, 4pm. At this time, the service status website said the problem had been fixed and so did the person I spoke to on the phone.
    Now its 730 and im still having the same problems. My lights are all blue, and then every 20-30mins or so the broadband and phone lights will flash orange for 20 seconds and then finally go back blue. Sometimes I have to reboot the router to get them back to blue.
    Is this just because there has been a recent problem and the router is just settling down again and getting the best speed back? Or something else?!
    Thanks

    The orange flashing light only happens when a resync happens and the speed can go up or down.
    This is the fault ticket that was closed of at half 4 this afternoon.  Please wait till tomorrow morning and tell us if you have any further problems.
    Fault Reference: BT33637
    Start:
    23/10/2011 11:19
    Cleared:
    23/10/2011 16:26
    Raised:
    23/10/2011 11:19
    Cleared Reason:
    Unknown
    Detected:
    23/10/2011 11:48
    Exchange Name:
    BARTESTREE CROSS
    Incident Headline:
    MANCHESTER EDGE ROUTE SWITCH 6 : DEGRADED SERVICE
    Incident Details:
    Some of your Broadband End Users may have experienced a loss of Broadband Service.
    Area Codes:
    01200 01204 01226 01244 01248 01253 01254 01257 01260 01274 01283 01286 01298 01341 01352 01388 01405 01432 01457 01484 01490 01492 01507 015122 015126 015134 015148 015151 015152 015160 015164 015167 015170 015172 015173 01524 01530 01535 01544 01547 01584 01597 01606 016122 016123 016124 016127 016162 016172 016173 016176 016192 01625 01654 01663 01690 01691 01697 01704 01706 01721 01744 01745 01772 01782 01824 01829 01889 01924 01938 01942 01943 01978 01989
    Progress
    Received Issue Update
    23/10/2011 17:22
    FINAL
    Service has been restored as of 16:26; by completing: a change of hardware. BT regrets any inconvenience this may have caused.
    23/10/2011 14:17
    3
    Fault diagnosis is ongoing.
    23/10/2011 12:08
    2
    An engineer has been tasked to site and new hardware ordered.
    23/10/2011 11:53
    1
    Fault diagnosis is ongoing. Next update will be at 13:30.
    Regards Edd
    Check your Line
    BT Speedtester

  • LaserJet 2200 and Windows 7 Professional 64-bit - a mutual disagreement society?

    In upgrading my XP Professional system to Windows 7, I've got a real problem linking to my LaserJet 2200d printer. The store that did the upgrade mistakenly upgraded to 32-bit Windows 7, but the printer worked fine. In doing the proper upgrade to 64-bit 7 Pro, a problem arose - nothing prints and the data light on the Laserjet 2200 does not even flash. Observables:
    1. I've tried all the 64-bit drivers published from Microsoft via Windows Update and from HP. Nothing works, including the universal printer driver and regressing to the 32-bit driver.
    2. The printer shows as installed, but with a yellow, triangular warning sign, yet there are no details on the problem or suggested fixes.
    3. Windows Troubleshooter doesn't fix the problem.
    4. I thought to uninstall all the drivers and start fresh, but links to HP's driver uninstaller yield a "page no longer available" error message.
    I use this printer as my workhorse - sure would appreciate some help. I'm a nontechie, so step-by-step instructions would be very helpful. Thanks!

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at HP Enterprise Business Community.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Laserjet 1300 with blinking orange light

    Got a laserjet 1300 with a blinking orange light.  When restarting, motor works.  I have cold-booted and reset all wiring. What's wrong?

    When you set it to +manage manually+, iTunes keeps the iPod (as a storage device) mounted. Therefore, +enable disk use+ is also checked because that is the setting where you have to formally eject the iPod before disconnecting it.
    If you have it set to sync (uncheck the +manage manually+ setting), iTunes automatically un-mounts the iPod (as a storage device) when iTunes is not syncing. Therefore, you are allowed to disconnect the iPod without clicking on eject first. But if you want to use the iPod as a storage device, you have the option to +enable disk use+ (and use the sync setting)

  • Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or my wireless router but nothing. Just a flashing orange light. Help for a simpleton p

    Problems setting up my TC. Have just bought new iMac(OS 10.6.8) and  TC. I tried to set it up. iMac cannot find it. I have tried direct connection with an ethernet cable to Mac or direct to my wireless router but nothing. Just a flashing orange light. Help for a simpleton please. Have tried reseting TC, but to no avail.

    Just updated from 10.6.7 ---> 10.6.8 and had the same issue. Despite having done a clean install from 10.6 and got everything back off my TC, now Time Machine can't find it!
    Green light is on, ethernet cable conected, network CP says its conected but nothing. Airport Utility can't find it. Hit reset button, Orange flashing light but still no show in Airport Utility.
    But I know its there, as rebooting from 10.6 SL disk shows the backups are still ok?
    Hmm, ideas anyone?
    SBB

  • My ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off.

    my ipod shuffle is showing up when plugged into my computer. Also, isn't the orange light suppose to stay on until charged. Mine lights orange for a minute and then goes off and also it wont be recongnize by my computer .please help

    I'm having the same problem.  I'm using a new shuffle usb cable in my 2nd generation shuffle and nothing shows up on computer.  I'm wondering if the dock for the second gen is different than the new usb cable direct into the 2nd gen shuffle. I don't have a dock for it.  Before I buy one on ebay I hope someone can assist.

  • When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

    helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????

    Even i have a same problem...

  • When i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please???? iPod shuffle

    helpwhen i connect my ipod shuffle orange light blinks 4 times.. but after that it wont response.. it is not recognized by my computer and by i tunes as well.. after hours of charging it doesnt charge.. help me please????
    iPod shuffle

    Even i have a same problem...

  • HP Laserjet 2200 and new JetDirect card and DHCP

    We had to replace the JetDirect card in an HP laserjet 2200.  As soon as that was done, the DHCP service will not give it an IP address in our network.  It has an APIPA address 169,254.X.Y.  The printer is in a distant branch office and so before I travel to the office I was hoping for hints on why this might have happened (and if anything can be done remotely).  On the laserjet 2200, there is no LcD panel or display to alter settings, so we must use the web interface, which we cannot get to.  Thanks in advance for anyone's thoughts.
    Marty Franek

    It appears this is for a commercial printer.  It would be best to post in the commercial LaserJet forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I need help printing with HP laserjet 2200 and OS 10.6

    I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

    Hey jeo1951,
    If you haven't already, try running through the recommended steps in the following article:
    Mac 101: Printing (Mac OS X v10.6)
    http://support.apple.com/kb/HT3771
    It should help you set up your printer.
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

Maybe you are looking for

  • Select statement

    Hi all, if i use around 10 select single statement in loop statement...will it affect any performance... actually i m writing loop inside loop and then 10 selct single statements.... thx

  • Mirroring vs Closed Lid Processing Used

    Greetings, Is mirroring to an external display the same as using an external display with the lid closed? I am assuming mirroring takes more graphics processing power. What about with the lid closed? Is that the same as using just the built in displa

  • Reg : Mail step

    hi, I have a user decision with approve reject outcomes. and this user decision step is sent to 3 different users (USERID1, USERID2, USERID3) with help of RULE. when user 1 clicks approve  .......a mail   is sent him(to his userid USERID1) saying tha

  • [SOLVED] Trying to write HLDS systemd service file

    Hey, I want to write a systemd service file for my HLDS AUR package: https://aur.archlinux.org/packages/hlds/ My environment file looks like this: HLDS_USER=root HLDS_WORKINGDIR=/opt/hlds HLDS_PARAMS="-game cstrike" HLDS_LOGFILE=/var/log/hlds_cstrike

  • Launchpad does not display all applications

    Hi, Not a biggie but thought it might show some industrial strife in the background! I've installed ML and now launchpad does not show Microsoft Office (Excel, Word, etc). They are still installed, perfectly usable, and on the dock anyway, but is thi