HP Laserjet 2200 Series PCL5

  Printing not working properly
My printer stop printing with anything coming out -- isn't grabbing the paper from the tray. It sounds like it's going to print (rollers going) and nothing comes out. The red exclamation point light is coming on. I have turned the printer on and off, and done everything else I can think of. Have also checked for paper jams and fine there. Earlier before this, I printed something from a website (totaling 4 pages), telling the printer to print on both sides, then it started struggling, the rollers were sounding bad; slowing down and the printer only printed page 2 of 4, and 4 of 4. It didn't print the other 2 pages. I don't what else to do now. I hope I don't have to take it in to get it fixed. What a bummer if I do!

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

    Dear
    I need
    HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
    can anyone provide me ? no links to read text, direct solution is welcomed
    thanks in all

    Hi.
    You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
    For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
    Please let me know of any issuesm
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Laserjet 2200 dn - won't print with windows 7

    Have just bought a new system with Windows 7 and Office 2010 and don't seem to be able to get my printer to work.
    Printer is a Laserjet 2200dn, connected via a USB. 
    The system recognises the printer as a HP Laserjet 2200 PCL5, however, when I try and print, the print queue shows "print error".  No way of identifying what the print error was.
    Windows has not told me that it couldn't find a driver so I presume that it did.
    Can anybody tell me how to get the printer to Print?

    i have the exact same problem- i've even tried loading all 3 of the recommended drivers and using each-
    even the original driver cd doesnt work- when it tries to install itself, it gets a "severe error" and quits.
    have you gotten this thing to work at all?
    i think the issue has to be with windows 7- the printer works with all of my other computers (of various op systems)

  • How to print on HP LaserJet 2200 over Ethernet?

    Hi,
    I did an upgrade to Snow Leopard and would like to print on a HP LaserJet 2200 over Ethernet. OS X and the HP printer drivers are up to date now.
    The printer has been cold reset and on the configuration print out there's the IP address 0.0.0.0
    Now my question is how to get this printer to work with Snow Leopard over Ethernet? I did not find a tutorial how to assign an IP address to the printer first so I got stuck.
    Could you give me a hint where I should start with the configuration first?

    OK, now the printer works
    I reset the router and checked if DHPC is running.
    I reset the printer (hold down the GO button, turn the printer on and continue to hold the GO button for five to ten seconds).
    Checked at router that the printer is visible as network device.
    At the router I assigned a fixed IP address to the printer.
    At OS X System Preferences > Printer I added a new printer with "HP Jetdirect - Socket", the fixed IP address and the correct printer driver "HP LaserJet 2200".
    Now the printer has been recognized well by the system (Tray 3, Duplex and printer RAM) and printing works.
    THANKS.

  • Printer driver for an HP LaserJet 1000 series for use with Windows 7

    The CD ROM HP LaserJet 1000 series printer driver is not recognized by my new Windows 7 PC. So the printer does not work. I've looked on the HP web site for compatible drives and get the hint that a Vista driver would work. Can someone please confirm if this possible and how this is accomplished? Thanks.

    Where did you find a hint that Vista drivers would work?  This page says:
    Your LaserJet model is not supported in Windows 7.
    For more information regarding upgrade programs and new product information, please visit the HP Trade-In/Trade Up website at www.hp.com/united-states/tradein/home_flash.html or directly from HP at www.hp.com .
    Additionally, this page says the Laserjet 1000 is not supported in Vista.
    If you are using the 32 bit version of Windows 7 it may be possible to download the XP drivers here and install them.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Cannot print with HP Laserjet 2200 on network

    I run software update periodically and downloaded the HP driver update when it was offered.
    I uninstalled the Laserjet 2200 that worked with 10.5.8 in the print and fax system preferences and reinstalled it. It is recognized and I get the correct image for the printer, but when I try to print it pauses, I resume printing and it thinks a little and pauses again.
    I chose the Laserjet 2200 printer driver, but it does the same with a generic printer driver and the offered alternative Gutenprint driver.
    Other users on the network running 10.5.8 have no trouble printing to this printer.
    Thank you

    Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
    I have no experience with Linux, sorry.
    Michael

  • HP Color LaserJet 2550 series

    Hi,
    I installed the HP Printer Driver Pack available on the Apple site for my HP Color LaserJet 2550 series printer. It works, but there are some odd things here.
    First, the driver can't read the printer state. Like how much is left for each colour and things like that. It just says, No information available.
    Second, When I print after I already printed something else the printer will be unavailable according to the driver. I need to turn of the printer and back on for it to print again.
    Third, When there is an image on one of the pages (LibreOffice) it takes forever for that page to be printed.
    Via the App Store I get new versions of the driver pack, so I am up to date.
    Also, when I connect this same printer to my Laptop (Linux) everything works. These are HP drivers for Linux. My laptop can read the printer and ink/toner status. I don't have to turn off the printer after each job and images print a lot faster. Ok, real big high ress photos not, but normal images just roll out. Whilst on my Mac it takes minutes.
    So in my opinion there is something wrong with the driver. I reinstalled the printer, and due to some other issue I reinstalled OS X but the problem remained.
    I hope there is a resolution for this.
    Thanks,
    Ricardo

    I managed to get some success by rebuilding as described in another posting:
    Dominique Simon
    Re: HP Laserjet 2550L prints one job then hangs 
    Jun 15, 2012 2:13 AM (in response to Fami R.)
    I had this issue too with my HP 2550. No more printing after the first printjob possible
    I managed to get the printer working as expected by removing the hp_io_enabler kext.
    sudo -s
    mkdir /Valhalla
    mv /System/Library/Extensions/hp_io_printerclassdriver_enabler.kext /Valhalla
    exit
    Wait for the systemcaches to be rebuilt and reboot. You can see if the caches are being rebuilt by opening the Activity Tool, the process is named kextcache.
    You need to have the Valhalla Folder in root of course.
    Not very mac-like, but it works

  • DRIVERS FOR HP LASERJET 1005 SERIES FOR WINDOWS 8.1 64 BIT

    Hello!
    When I can get drivers for hp laserjet 1005 series for windows 8.1 64 BIT?
    My printer work perfect and i would not chance it!
    Is anny solution there?
    Thank you for your answer.

    Hi, the 1005 Laserjet is not supported in Windows 8/8.1, see this link.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • Hp laserjet 1005 series printer drivers

    hp laserjet 1005 series printer drivers

    This worked for me in windows 7 professional 32bit SP1. Fresh install. I like my printer, I have used it for many years under both linux and windows and I had no intention of throwing it away. I am pleased I have found a way to make it work, I would have surely never bought HP again otherwise.
    How to make a HP LaserJet 1005 series work in windows 7 32bit
    1. download the printer driver HP LaserJet 1005 Host Based Driver v 5.51.2103.0 released 6 Oct 2003
    Right now it can be found here: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?cc=us&prodNameId=214539&prodSerie...
    It is named  lj1005hostbased-en.exe - md5sum 428274e8060e830aeaf1acf06f10a398
    2. Extract the printer driver to a folder. (It is a winzip self-extract executable)
    3. Go to the printers page and "Add a new printer". It will ask you to select a port, but not an USB because USB devices are automatically detected. Scroll down and select "Virtual USB port" (not sure about the naming but you'll find it)
    4. In the installation of this virtual-usb connected printer you can say "I have the driver". Click on the button, point the printer dialog to the driver folder and select the .INF file in the directory (there are two, I used the first one). You will successfully install a second printer named "HP Laserjet 1005 series"
    5. Now right click the real printer, which has the same name but has the warning triangle because it needs "troubleshooting" - it has no associated driver. Select Troubleshoot. It will look for drivers. Skip looking online it is just a waste of time. NOW IT WILL FIND THE DRIVER YOU INSTALLED FOR THE VIRTUAL PRINTER. CLick OK.
    6. The danger triangle disappears, the virtual-usb printer with the same name disappears and you are lef with a printer named HP Laserjet 1005 series which... works!
    Cheers.

  • HP Laserjet 2200 and new JetDirect card and DHCP

    We had to replace the JetDirect card in an HP laserjet 2200.  As soon as that was done, the DHCP service will not give it an IP address in our network.  It has an APIPA address 169,254.X.Y.  The printer is in a distant branch office and so before I travel to the office I was hoping for hints on why this might have happened (and if anything can be done remotely).  On the laserjet 2200, there is no LcD panel or display to alter settings, so we must use the web interface, which we cannot get to.  Thanks in advance for anyone's thoughts.
    Marty Franek

    It appears this is for a commercial printer.  It would be best to post in the commercial LaserJet forums.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP laserjet 1200 series not responding

    I just got an hp laserjet 1200 series printer from a friend that used it on his pc. I can't seem to get my computer to recognize it. I have tried going to the hp page and downloading the driver and the software, which I thought I did, but when I open printer setup utility and look for new drivers, nothing appears. Any ideas?

    Is your printer connected through a hub or directly to the computer?

  • I need help printing with HP laserjet 2200 and OS 10.6

    I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

    Hey jeo1951,
    If you haven't already, try running through the recommended steps in the following article:
    Mac 101: Printing (Mac OS X v10.6)
    http://support.apple.com/kb/HT3771
    It should help you set up your printer.
    Welcome to Apple Support Communities!
    All the best,
    Delgadoh

  • I can't print to my HP laserjet 2200

    After installing Mac OS 10.4.4 Tiger on my Mac G4, Illustrator CS2, version 12.0.1, Adobe Acrobat and InDesign won't allow me to print to my HP LaserJet 2200.The error message says the PPD is wrong. I can use my Epson printer, and the LaserJet works as usual in Word and Mail, and even in Photoshop CS. It was printing fine until OS 10.4.4. It seems to be the Adobe products mentioned that have a problem. The printer uses a USB port, and shows up correctly in the System Profiler and in the Printer Setup Utility. I also repaired permissions. Can anyone tell me how to regain the use of my printer?

    success at last! I somehow found PPD drivers for HP laserjet printers on the Adobe website. http://www.adobe.com/support/downloads/product.jsp?product=44&platform=Macintosh
    Nowhere on the Adobe website do I see any indication that this PPD needs to be added when upgrading to OS 10.4 Tiger. Nor is it on the Apple site.They really should make an effort as there are pages of Forum postings regarding this problem.
    I had to upgrade Stuffit to 10x as well in order to expand the download. Once I did that the old HP2200 printer file had to be deleted from the Setup Utility, and the new printer driver added. After doing all that, my print dialog windows returned to normal and printing was restored. Thanks for your help. It was a nightmare. By the way, I did try the trial version of Fixamc, which didn't work, but cleaned up some files. They were very responsive to my e-mail request for assistance.
    Louis

  • How to define the HP LaserJet 1100 Series(SHARP AR-M550U )?

    Hi,
    Once the SHARP AR-M550U got plugged to my HP laptop on which Windows 7 Home 64BIT is installed, this screen shot showed me.
    I have checked for drivers using Windows Update. But it didn't find any. As this screen shot below.
    I don't have the drivers  disc which came from manufacture.
    This is hardware ID for SHARP AR-M5501UB104
    I have googled for USBPRINT\SHARP AR-M5501UB104, but no results showed.
    Also, What new featuers are there in HP LaserJet 1100 Series(SHARP AR-M550U ) different from other HP LaserJet P2015 PCL6 and HP laserJEt Professional P1102?

    could anyone please reply to me  since I am in an urgent  need for using this this  photocopier.
    By entering my Enter product name/number, which is SHARP AR-M550U and pressing 'serach', these results found:
    Product search resultsSoftware & driver downloads
    Results for "sharp ar-m550u" (22 products)
    HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
    HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
    HP Pavilion t500 Desktop PC series
    HP Pavilion t550m Desktop PC
    HP SFP and Mini-GBIC BX10-U Transceivers
    HP X115 100M SFP LC BX 10-U Transceiver
    HP SFP and Mini-GBIC SX Transceivers
    HP X126 1Gb/s SFP LC SX MM 550m 850nm Transceiver
    HP Networking Switch Redundant Power Cords
    HP X290 500 U 1m RPS Cable
    Micron M550 256GB mSATA-3 Solid State Drive
    Micron M550 256GB mSATA-3 Solid State Drive
    HP Tape Drive SAS Cables
    HP 1U SAS Ext-Min 1x-4m Cable Assembly Kit
    HP 1U SAS TP I-E 3HDDs X 1Tape Drive X4M Server Cable Assembly Kit
    HP SFP and Mini-GBIC BX-U Transceivers
    HP 114 100M SFP LC BX-U Transceiver
    HP X112 100M SFP LC BX-U Transceiver
    HP 3PAR Drive Chassis
    HP M6710 2.5 inch 2U SAS Drive Enclosure
    HP M6720 3.5 inch 4U SAS Drive Enclosure
    HP SecPath Licenses
    HP SecPath U200-M 1 Year Anti-spam Service License
    HP SecPath U200-M 1 Year Anti-virus Update License
    HP SecPath U200-M 1 Year IPS Update License
    HP SecPath U200-M 1 Year Web Content Filter Service License
    HP StoreFabric Premier Flex OM4 Cables
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 4M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 6M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 10M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 25M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 50M Cable
    HP Premier Flex LC/LC LSZH 50/125u OM4 MM 1.6mm Zipcord Short-boot 100M Cable
    I am quite confused which ones should be installed to define the SHARP AR-M550U on my HP laptop on which Windows 7 64bit is installed.

  • Install Failed for HP Laserjet 1200 Series in new Laptop with Windows 8, 64 Bit

    Product Name - HP Laserjet 1200 Series, PCL 6 Driver
    Operating System: Windows 8 Home Edition, 64 bit
    Error Message : Can't find the 1200 Series on the Network. To locate manually click ok ....
    Changes Made - This is an installation on new laptop, running Windows 8, 64 bit
    Description:
    1. Installing to an existing network, that consistedof a desktop and two wireless laptops.
    2. Both Laptops have Windows 7, 64 bit. Above named printer is successfully accessed from the laptops.
    3. Am replacing one of the laptops with the Windows 8 64 bit.
    4. The Series 1200 path is: Wireless Printer to Router, Router to Desktop via ethernet, Desktop to Printer via cable.
    5. The wireless printer configuration is
            Name:  HP Laserjet 1200 Series PCL 5
            Port:     \\Central\HPLaserj
           Printer: HP Laserjet 1200 Series PCL 5
          Driver: HPMCPM25.GPD   5.8.2008
    Problem
    Unable to recreate this path with the Windows 8, 64 bit configuration.
    a. When I attempt to download a current driver always wind up with a file entitled UPD-pcl6-x64-5.6.0.14430
         This appears to be a universal PCL 6 printer driver, Can successfully unzip the file and create a folder
    b. During installation I can see the the desktop printer ICON (name:\\central\HPLaserj); so far, so good
    c. Process fails to locate a driver and instructs to manually locate.
    d. Browsing to the HP Universal Driver Folders fails because a driver cannot be found .
    e. Attempting to manuall enter fails because you cannot input the above address (\\central\HPlaserj). Can only enter HPLaserj for the address, which obviously does not work.
    f. When the installation did show a list of drivers, the only one I found was a universal PCL 6, which is what I thought I was trying to download originally.
    This set up worked successfully with the Windows 7 64 bit. It appears I need help from a lot more expertise than I have to walk me through this set up. 
    This question was solved.
    View Solution.

    Problem Solved.
    This link gives a good insight into the solution
    http://www.sadjad.net/blog/2012/11/28/windows-8-sh​ared-printer-driver/

Maybe you are looking for