HP LaserJet 2300 - "Printer Busy"

I can only print one job on the 2300 without physically switching the printer off & then back on.
If i try to print a second document without doing this i get a "printer busy" message.
I am running OS 10.4.6 but have had this problem with all versions of Tiger. Had no problems when running Panther.
Anyone help??
G4 Mac OS X (10.4.5)

Hey I have found it!
Solution1. Start > Control Panel > Printers
2. Locate the printer > Right Click > Properties.
3. Device Settings > Mopier Mode > Set to Disabled.
4. Apply OK

Similar Messages

HP LaserJet 4300 prints gibberish for one user, but prints OK for all others on a Windows 7 32-bit

HP LaserJet 4300 printer installed via LPT1 using Universal Print Driver v5.2.6.9321 on an HP 8100 desktop running Windows 7 Enterprise SP1 32-bit.
For one particular user, this printer prints gibberish no matter what type of document she attempts to print.
Not sure when the problem began, the user uses a network printer to work around this issue. She can print to any of the other HP printers on our network OK, including another 4300 down the hall.
Anyone else can log on and print the same documents OK on this desktop using this printer.
Have tried rebooting the HP 8100 and power cycled off/on the 4300. Also uninstalled and re-installed the 4300.
I have updated the firmware on this 4300.
Changing the print processor in the printer properties did not help either.
Virus and malware scans have not detected any issues.
Any advice for this issue would be greatly appreciated.
This question was solved.
View Solution.

Hi MDOTd5-247,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP LaserJet P2055dn Printer won't print the last page of documents & envelope problem

My HP LaserJet P2055dn Printer won't print the last page of documents until i send another document, then it will print the last page of the previous document, but omit the last page of the current document. I need to keep printing a blank page or any other page to get my previous documents completely printed. Also, the envelopes print with large rectangular boxes on them and no address (I don't know if this is a result of the previous stated problem or not - it started happening at the same time) I use the envelope feature in Microsoft Word 2010. I never used to have either of these problems - didn't make any changes to the system or add any software to the computer, so I know it's not that. Any help would be greatly appreciated!!

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Windows 7 to Networked LaserJet 2300 (running XP)

I purhased a new laptop running Windows 7. I have an HP LaserJet 2300 running on another computer with Windows XP as the operating system using a USB connection. In addition, there is another laptop running Vista and another desktop running XP. All 4 computers are networked thru a Linksys router/switch. The Vista and XP computers can access the LaserJet 2300 thru the network. However, the Windows 7 machine is a problem.
If I hook up the LaserJet 2300 directly to the Windows 7 machine, it finds a driver and works. However, when I try to add the LaserJet 2300 as a networked printer, I get a message that says the driver can not be found. I can get as far as seeing the LaserJet 2300 in the "shared printer window", but when I click next, I get the message that it can not locate the driver.
I have downloaded the HP generic driver on the Windows 7 machine. And when I "browse" to that file, and try to match the required *.inf file, I get the message that it cannot be found.
Does anyone have a work around?

Hi bilibestimt,
How about if you try to hook the LJ2300 up to the Win 7 machine locally via USB (at this point I am suspecting you are using the inbox Microsoft LJ2300 driver) and verify that it works with the installed plug and play print driver...
Then print a config page from the LJ2300 for the IP address, and go back to the Windows 7 PC and go into the "Devices and Printers" folder, and then right click on the LJ2300 installed USB driver and go to "Properties", and then go to the "Ports Tab", and click on "Add Port"
-choose standard TCP IP port
-Click on New Port
-Type in the LJ2300 printer's IP address
-Click Next and follow the prompts.
-This should allow the USB installed print driver to print over a network port.
Although I am an HP employee, I am speaking for myself and not for HP.

Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports?

My usb port on my Laserjet P4015n no longer works and I am unable to connect this printer to my network router because it's in a different room. Is it possible to connect an HP LaserJet P4015n printer to a computer via the ethernet ports? Of so, how would I go about making this connection? Will I need to install ethernet drivers for this to work?
Thanks,
Greg

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Color LaserJet CP2025 Printing Issue

HP Color LaserJet CP2025 - prints only in B&W - how do I set the printer to print in color?
The latest driver has been installed.

Hi Yahootie,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Laserjet 2300 and Landscape Mode

I have a Laserjet 2300 that I use regularly. When I switched to Leopard, it found the driver and installed it fine, but now it won't recognize printing in landscape mode. Doesn't matter what you are printing from (Word, Pages, Finder, etc.).
Any suggestions?
P

Here are a few:
http://discussions.apple.com/thread.jspa?messageID=5779786&#5779786
http://discussions.apple.com/thread.jspa?messageID=5717640&#5717640
http://discussions.apple.com/thread.jspa?messageID=5745729&#5745729

My HP Color Laserjet CP3525dn printer is only printing parts of my document in colour.

Hi All
I am having a problem with the office HP Color Laserjet CP3525dn printer. I am a novice and the tech guy we use is on holidays! We are using windows 7 with hardwired connection. The problem is that it is only printing some parts of my documents in colour. Some documents are being printed completely in B & W! Any ideas? Thanks

Hi trixie49,
The link below is to the guided troubleshooting utility. Since this is a commercial LaserJet printer you should also post your question to the second link below.
http://h20584.www2.hp.com/hpgt/guides/select?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3690646&lan...
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP LaserJet 8000N 'print' blanks PDF files.

HP LaserJet 8000N 'print' blanks PDF files.
Tried different PDF programs - same result.
PDF files prints OK on my other printer
Any idea why and how to fix?
Thanks
Sam

Hello @samdolev,
Welcome to the HP Forums!
To get your issue more exposure I would suggest posting it in the commercial forums since the HP LaserJet 8000N is a commercial product. You can do this at HP Enterprise Business Community.
The support page for your product may be helpful in the meantime:
HP Support Center.
I hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Laserjet 4P Printing Problems

I am using a Mac G4 with 10.4.7 and printing on a HP Laser Jet 4P using driver HP Laser Jet 4 Series Gimp.
When I first print a page or 20 pages of the job, all works fine. Once I go to print another job, I get the msg "GIMP Printing Page 1, 15% and the printer will not print no matter how long I wait. The only solution is to turn the printer off, re boot the Mac and then it will print one job. To print another job, without a failure, I must turn off the printer again and re boot the Mac. This is really a problem, especially when printing UPS Shipping Labels. Any idea how to correct this problem ?
I do not have the problem with a Epson Printer with standard Mac Drivers. But The HP Laser is so much cheaper to do volume printing, I prefer to use the Laser Jet 4P.
Thank You for your help
Paul

Here is the latest update on the HP LaserJet 4P printing problem.
1. I went to Library>Printers and dragged the Icon (HP Laserjet 4p.app) to the dock. Printer still will not print.
2. Reloaded the driver HP Laser Jet 4Plus v2013.111
Printer will not print. Error mag on printer is (W2-Invalid Pers)
3. Reloaded the driver HP Laser Jet 4 series Gimp Print V5.0.0 Beta.
Printer will print one Job (1 page or 20 pages). Send another job and it will not print.
4. Downloaded the HP Driver for Laser Jet as was instructed in an earlier post
( HPlaserjet v552.dmg) I double click on the .DMG file and it brings up a Icon of a Disk Drive on the desktop HE LaserJet V5.5.2.051. Double click on that icon and a window opens with the same information. There is no place to click to install this driver.
I do not believe the HP Laser Jet 4P has a problem as I can hook it to a PC and it will print one job after the other, never a problem.
How do I get the driver mentioned in #4 to appear in the HP Print drivers list in the printer setup utility so I can select it.
The Parallel to USB converter I am using was the one recommended earlier this year as the one used by a few here on the forum to run their HP Laser Jet 4P.
I could forget the HP Laser Jet and go with my Epson printer. However with amount of business printing and UPS Labels the ink cartridges is very costly. The Laser Jet will run for almost 2 years on a Cartridge. Others have made the Laser 4P work on a Mac. Please scan through my first post and replies to get a flavor of the problem.
Thanks for your continued support. Needless to say, I am lost in this problem.
Paul

Hp laserjet 4m printer, the greatest printer in the world vs 10.5

I have an old HP laserjet 4m printer. This is the best investment I ever made for my business. It has been a great workhorse, always reliable. Now with Leopard it does not work. The print driver sees the printer and allows about 2 seconds of connectivity, then it dis-engages and flushes the print job. Anyone find a work around for this? Every app does the same thing. I am using the LaserJet 4M printer driver supplied by apple.
Also is anyone else haveing trouble saving files to an external hard drive from Adobe products running Leopard?

lilacsrock wrote:
My HP Laserjet 1600 printer will not print on my new OS X 10.8. Macbook Pro laptop. Mac sees the printer in the "Add Printer" window but then gives the message, "Software for this printer isn't available from Apple. Contact the printer's manufacture for the latest software." I did but HP's website says that the software is available from Apple!
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03411613
Products not supported
The following products are not supported in Mac OS X including the Mountain Lion operating system:
HP Color LaserJet 1500 and 1600 Printer series
I recommend you purchase a printer from a company that visibly supports OS X. HP is not among them.

E Print 6500A: Printer busy error?

E Print worked for the first day perfectly. Now it says that the print job is pending because the printer is busy.
Here is the exact message:
Thank you for using HP's ePrint service. Your print job was received. Printing has been delayed because the printer is currently busy printing other jobs.
Anybody know how to fix this. My printer is not busy btw.
Nathan

nathanveirs wrote:
E Print worked for the first day perfectly. Now it says that the print job is pending because the printer is busy.
Here is the exact message:
Thank you for using HP's ePrint service. Your print job was received. Printing has been delayed because the printer is currently busy printing other jobs.
Anybody know how to fix this. My printer is not busy btw.
Nathan
If you haven't already, try rebooting your printer (power off/on).
If that doesn't help, go to www.hpeprintcenter.com and cancel the print job. To do that you'll need to use your personal email address to create an account there, and then add your printer to your account using your printer's email address. If you didn't add your printer to your account when you first set up your printer, you'll need to reprint your web services info sheet...information on that below.
Once you've added your printer you should be able to cancel the print job on ePC.
If that doesn't work - print job won't cancel or you continue to experience this issue w/other ePrints - then the best approach would be to remove and then re-enable web services on your printer. That will clear the printer from your account and remove all print jobs associated with it, and give your printer a new email address that you can use to re-add it to your ePC account.
Hope this helps.
How to Reprint your web services info sheet
You may need to reprint your web services info sheet to enable your printer for adding it to your ePrintCenter account - your printer's email address can only be used to add it to an ePC account for 24 hours after printing the info sheet. Reprinting the info sheet doesn't change your email address, it just re-enables your printer to be added to your ePC account.
The steps to reprting your info sheet vary by product:
Photosmart Printers:
Depending on the printer model, either via the Setup>Wireless>Web Services Settings menu, or on other printers via the ePrint icon on the front panel display – select the ePrint icon and select the “Print Report” button on the Web Services status screen.
eStation -Select the Menu button on the eStation display (to the right of the Home and Back buttons at the top left when the display is docked on the printer); Scroll down to the ePrint section; Select the blue "Web Services" settings link on the right of the ePrint section; Select the Print ePrint Information option
Officejet printers:
Depending on the printer model, either via the Setup > Web Services Setup >Printer Email Address menu, or on other printers via the ePrint icon on the front panel display – select the ePrint icon and select the “Print” button on the ePrint Status screen.
LaserJet printers:
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Click the Print Information Sheet button.
Once you have reprinted your info sheet and added your printer to your account, you will see the "ePrint Settings" button on the Printers tab on ePC.
I am an HP employee.

AEBS (802.11n) and hp laserjet 2300 series

Has anyone had success with wireless printing using hp laserjet 2300 series?
I've installed the 2300 series drivers, but can only print when the printer is attached directly to the computer.

Unfortunately, not all USB printers are compatible with AirPort base stations. A quick look at the iFelix Unofficial AirPort Printer Compatibility List doesn't show this particular model. This doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

HP Laserjet 2300

I'm using a HP Laserjet 2300 with a Windows 7 Laptop. Printer will not print multiple copies (even when requested through software: MS Word, Quickbooks, Quicken, etc.) Receive the message: "Job Storage Status Page" Error: unable to store job at printer. Reason: Printer not configured to collate. HELP!! I DON'T KNOW HOW TO CORRECT THIS PROBLEM!!!

Hey I have found it!
Solution1. Start > Control Panel > Printers
2. Locate the printer > Right Click > Properties.
3. Device Settings > Mopier Mode > Set to Disabled.
4. Apply OK

Laserjet 2300

Hp Laserjet 2300 PCL6 install in window xp and share on nertwork in office. When i try to install on my laptop with window 7via Lan cable on network. becomes a driver error.
Error are:
(window cant finder a driver for hp laserjet2300 series PCL6 on the network.To locate on manually.click ok oterwise click cancel and consult your Network administrator or the printer Manufactures website)
please reply me with solution as soon as possible.

@mazhar321
The only drivers available for the Laserjet 2300 and windows 7 operating system are a Universal Print Driver (UPD) and the drivers available with the windows 7 operating system. Please refer to the document below for help on how to install the drivers that come with the windows 7 operating system.
Install a driver included in the windows 7 OS
If you prefer to use the Universal Print Driver (UPD), that driver is downloadable at the product home page or from the UPD site: www.hp.com/go/upd
Please let me know if you have any additional questions.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

HP LaserJet 2300 - "Printer Busy"

Similar Messages

Maybe you are looking for