HP Laserjet 2605dn / HP Laserjet 2055dn on Windows 7: sorted printing fails

Hi,
I'm using the printers HP Laserjet 2605 dn and HP Laserjet 2055 dn on Windows 7 Ultimate 64bit, german edition.
I've installed the newest printer driver HP Universal Print Driver for Windows PostScript x64 Version 5.0.3.
On both printers I'm not able to do a sorted printing. This must be a driver problem because before the new install of Windows 7 I used a Vista 64bit system and sorted printing worked on both printers.
Is there anything I can change in Configuration (printing processor in driver or anything other) to get sorted printing working?
I have installed the latest firmware on the printers.
I've also tested the printing with the HP Universal Print Driver for Windows PCL5 x64 and the HP Universal Print Driver for Windows PCL6 x64 . Both these drivers even have more problems on windows 7: resolution over 600dpi is not available, sorted printing doesn't work, printing of more than one copy doesn't work.
Thanks for any help.
Greetings
Juergen

Juergen,
I have the same problem with a Laserjet 2605. Duplex printing just does not work in Windows 7.
Now November 2010 and still no solution.

Similar Messages

HP LaserJet 2055dn in Terminal 2003

Hello,
I need help with printer HP LaserJet 2055dn. I Installed this printer on Terminal Server 2003 with standard TCP/IP port. When user printing this printer is Administrator (user in group Administrator) printing is OK.
When user is not admin, printer is printing many many pages with nonsence. I have to stop printing and restart printer.
All admins are OK, other users cannot print.
I modified permissions and give common users full access permission with no effect. User must be admin to print with sucess.
Thank you very much for any help.
Jan

Juergen,
I have the same problem with a Laserjet 2605. Duplex printing just does not work in Windows 7.
Now November 2010 and still no solution.

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Laserjet 6P and Windows 8.1 Driver

The Laserjet 6P is not in the Printer list in Windows 8.1 and I don't see it as a supported OS at HP.com. Does anyone know a driver in Windows 8.1 that I can use for my old, but sturdy Laserjet 6P?

My Windows 8.1 Pro 64-bit system has built-in drivers for this printer model:
I don't know whether the drivers are present on a fresh Windows install; they may only have appeared in the list after the Windows Update button was clicked on the above Add Printers dialogue, then waiting (perhaps for several minutes) whilst additional drivers were downloaded, and the list repopulated.

LaserJet M1120 MFP + Windows 8.1 64bit - cannot find drivers for scanner

I have a new notebook with Windows 8.1 64bit and a LaserJet M1120 MFP multifunctional. For printing is OK, it found plug and play driver and I am able to print. For scanning, I couldnt find drivers. Please help! Thanks...

Hello Gabitza,
Welcome to the HP Forums!
I understand you're unable to find a scanning driver for the Laserjet M1120 MFP. I will do my best to assist you! There isn't a full feature software available, just a plug and play driver. As a workaround, you can use another program to scan a document.
Please follow this HP document on How to Scan: Windows 8. Click on how to scan without HP software and there is four programs to try. Let me know if you are able to scan a document.
Have a great a night!
I worked on behalf of HP.

HP Color LaserJet 1500L add windows 8.1

I can't find the driver for my printer (HP Color LaserJet 1500L) for windows 8.1.

Hi,
I afraid a such is not available, the printer is not compatible with Windows 8.1:
http://h71016.www7.hp.com/dstore/MiddleFrame.asp?page=config&ProductLineId=565&FamilyId=3294&BaseID=...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Drivers for HP Laserjet 4000t in Windows 7

I need Drivers for HP Laserjet 4000t in Windows 7. Do they exist? Where do I get them? I hate to lose my reliable old printer

Hi:
Try the W7 32 bit drivers and software from the HP Probook 450 G2.
Your model uses the Intel HD graphics driver.
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6943827&swLangOid=8&swEnvOid=4053

Drivers for hp laserjet 1200 for windows 7 64 bit

Nothing seems to work to get printer working.

Hey @Jskol ,
Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
I understand you are having some issue making your HP Laserjet 1200 on windows 7 64 bit work.
Can you please elaborate on what it is that you are experiencing so that I am able to assist you properly? Is it new and not connecting right? Has it lost communication and is now not working? How is it connected to the computer?
Have a great day and a wonderful new year. Get back to me.
I worked for HP.

LaserJet 1022 on Windows 8 64-bit driver problem

Hello!
After I've upgraded my computer and installed Windows 8 my printer LaserJet 1022 won't work - the drivers fail to install.
Operating system: Windows 8 64-bit
Printer: HP LaserJet 1022 connected via USB
I 'm trying to install latest drivers for 64-bit system (driver version 2012.918.1.57980 [18.09.2012]) and getting an error message that the driver cannot be installed because of a policy blocking NT4.0 drivers.
In the device manager the printer is listed in the 'Other devices'.
I have read forum topics on Windows 8 drivers installation but none of the solutions worked for me.
Any suggestions will be appreciated.
Pavel.

Hi @debblong ,
I see that you are having issues installing the printer on Windows 8. I would like to help you resolve this issue.
To access the Start in Windows 8 to do the steps provided in the previous post, in desktop mode, press the Windows key and R at the same time, to show the run command line. Then you can type in %temp% to access the files to delete them.
For the printer not being detected, we can try a few things.
Make sure the printer is connected directly to a wall outlet and turned on, and the USB cable is connected directly to one of the back USB ports on the computer if using a Desktop, if you are using a Laptop try another USB port.
The USB cable shouldn't be longer then 6 feet.
Is the cable a 2.0 or 3.0 cable? How to determine whether a USB 3.0 device is operating at SuperSpeed?
Is the USB port on the computer 2.0 or 3.0?
Follow these steps in this document to get to the device manager to check for any printer entries.
How do I get into Windows Device Manager?
Then click on Identifying problems in Windows Device Manager.
In the list click on Universal Serial Bus controllers and look for USB printing support, (make sure any other printers are turned off or disconnected) right click and uninstall it. If you have any others with exclamation mark or other devices in the list, delete them also.
Let me know what it showed in the device manager.
Then click on Action, across the top of the window and scan for new hardware.
If the printer wasn't listed at all in the Device Manager, try another USB port on the computer and another USB cable.
Restart the computer and the printer also to see if the printer will be detected.
If the printer still isn't recognized, if you have another computer, connect the printer to it to see if it is recognized.
Just to rule out a USB port on the computer, USB cable or hardware issue with the USB port on the printer.
Here is the link to the driver page, if you need it. HP LaserJet Full Feature Software and Driver.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Connecting 32 bit XP machine across network to HP Laserjet 2200d on Windows 7 64 bit machine

I am trying to connect a 32bit machine running Windows XP across the network to an HP 2200d Laserjet Series PLC 5 printer installed on a 64 bit machine running Windows 7 - The printer can be seen by the XP machine across the network but when I tried installing printer drivers I kept getting incorrect driver errors. (The HP printer had previously been connected directly. i.e., no network - to the XP machine before I bought the new computer and it worked fine.)
So I went to HP website and found two links on how to connect a 32 bit XP machine to the HP printer installed on 64 bit Windows 7, by setting up an x86 option on the host Windows 7 machine. These web pages are as follows:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskI...
and
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02030517
I carefully followed the instruction and downloaded and tried ALL drivers I could fine on the following HP LaserJet 2200 driver download page - but non of them worked http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=28862&pr...
I keep getting the error message "The specified location does not contain the driver HP LaserJet Series PCL 5 for the requested processor architecture." I even downloaded and tried to install the universal printer driver via the Setup.exe file that was downloaded but I received the error: 0x800f0214.
Any suggestions would be greatly appreciated.
Thanks,
Dan

I am trying to connect a 32bit machine running Windows XP across the network to an HP 2200d Laserjet Series PLC 5 printer installed on a 64 bit machine running Windows 7 - The printer can be seen by the XP machine across the network but when I tried installing printer drivers I kept getting incorrect driver errors. (The HP printer had previously been connected directly. i.e., no network - to the XP machine before I bought the new computer and it worked fine.)
So I went to HP website and found two links on how to connect a 32 bit XP machine to the HP printer installed on 64 bit Windows 7, by setting up an x86 option on the host Windows 7 machine. These web pages are as follows:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskI...
and
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02030517
I carefully followed the instruction and downloaded and tried ALL drivers I could fine on the following HP LaserJet 2200 driver download page - but non of them worked http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=28862&pr...
I keep getting the error message "The specified location does not contain the driver HP LaserJet Series PCL 5 for the requested processor architecture." I even downloaded and tried to install the universal printer driver via the Setup.exe file that was downloaded but I received the error: 0x800f0214.
Any suggestions would be greatly appreciated.
Thanks,
Dan

Printer Drivers for HP LaserJet CP1515N using Windows 7 64 bit

I am repeating the message as it is shown as solve below and this is not correct.
I am trying to find drivers for the HP LaserJet CP1515N that work for network printing. The HP site shows drivers are available but when you try to load them it shows a N/A message. The universal driver offered works for the printer via a usb cable but nor though a local network.

Hi:
The HP support pages are not working which is part of the problem.
These ethernet and usb 3 drivers should work for you...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_143277_1&swEnvOid=405...
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943827&swItemId=ob_141715_1&swEnvOid=405...
Wireless...I don't know what model WLAN card your model has, so please do the following steps so I can figure that out and I will then post the link to the driver you need...
Go to the device manager and there should be a device labeled Network Controller if the wireless driver is not installed.
Click on the Network Controller device and then click on the Details tab at the top of the Network Controller window.
Now you should see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

HP LaserJet 1018 and Windows 8.1

Hello,
I was trying to select the "Print directly to the Printer" option under my 1018's printer properties, but I keep getting the following:
"Printer Properties
Printer settings could not be saved
The specified datatype is invalid"
Can anyone instruct me as to how to fix this? Please let me know ASAP. Thanks!

Hello Candi_970,
Welcome to the HP Support Forums!
I see that when you try to set the printer setting "Print directly to the Printer" for the Laserjet 1018 on Windows 8.1, but it will not allow it.
You could try running the Print and Scan Dr on the computer. This will not allow you to set the "Print directly to the Printer" setting, but it could fix a driver or software issue the is preventing it.
Let me know if this has helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to install Printer HP LaserJet P2015 in Windows 7!

Dear all!
I am luck using windows 7-32bit. I would like to install Printer HP LaserJet P2015 in Windows 7, but I can't install it because when installing, I get it failed. In fact, I can install it in Windows XP without any obstacles, but now I upgrade to Windows 7 32-bit. Would you mind telling me what to do to solve it?
Thanks a lot and I am looking forward to hearing from all.
My best regards,
LUCK
This question was solved.
View Solution.

Hi LUCK,
The printing functionality for your driver is prodided by the HP Universal Print Driver.
You may download the driver by clicking the Download button from the link below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
If you may find it hard to understand any of the installation steps, you may find the full details below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Please let me know of any needed clarification.
Sincerly,
Shlomi
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536202#A6
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Laserjet 2055D and Windows 8.1 - 49 ERR 3D90A44

Hello
I have a brand new Laserjet Printer, the installed driver is a PCL6 - and when I want to print via USB, a blank paper is coming out and then I see this error message on the display:
49 ERR 3D90A44
I have already tried to install the newest firmware, resinstall all drivers etc. - but no effect. Do you have any idea?
Regards from Switzerland
mbg_ch

Hello Candi_970,
Welcome to the HP Support Forums!
I see that when you try to set the printer setting "Print directly to the Printer" for the Laserjet 1018 on Windows 8.1, but it will not allow it.
You could try running the Print and Scan Dr on the computer. This will not allow you to set the "Print directly to the Printer" setting, but it could fix a driver or software issue the is preventing it.
Let me know if this has helped.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Problem installing Laserjet 4050 in Windows 7 x64, No driver in Universal Print Driver v5.0.3

I have just installed Windows 7 64Bit operating system. I have be successful in installing several other more recent HP printers in the office. However, my main "workhorse" printer is a HP Laserjet 4050 and I have downloaded the Universal Printer Driver v5.0.3 for Windows x64 - PCL 5 and PCL 6, and in both cases it does not find a suitable driver. The HP download site states these Universal Drivers will work, but I cannot get it to install.
Is there a driver that will work on the 4050 in Windows 7 X64? Thanks everyone.

You're probably getting the "Windows cannot locate a suitable printer driver" error if you're trying to add the driver while adding a printer that is shared over the network. You see, HP's Universal Printer Driver (UPD) doesn't contain the PnpIDs of every printers it supports, so when you specify HP's UPD as the drivers for the network printer, if Windows can't find a match for the printer's PnpID it spits out the driver isn't compatible.
The way to overcome this is to install a "generic" printer locally, using HP's UP driver, and change the port afterwards to point to the shared printer. So, first, add a local printer (that will be using the LPT1 port - make sure no printer is attached!), and click on "Have disk(s)" to browse to and select HP's UPD. Going through the remaining steps should install a locally-attached printer named something like "HP Universal Printing PCL 5" (or "[..] PCL 6"). You'll then go in the new printer's properties, on the "Ports" tab, and click on "Add Port...". If you're installing a shared printer, you'll select "Local Port", click on "New Port..." and specify the path to the printer (e.g. \\myserver\hplaserj) as the port name. Those steps should do the trick.
Last thing: beware, though, as HP's UPD PCL 6 might not be compatible (anymore) with your LaserJet 4050, as they use a PCL XL class number/revision (class 2.1; sort of a version number of the protocol) that is higher than what your printer's firmware might support for PCL6 (should be class 2.0) I know the latest versions of HP's UPD PCL 6 doesn't work with our LJ 4000 & 4050 printers, so you might have to use the PCL5e driver for those 64-bit workstations.
Background info:
PCL XL error on Laserjet 4550n with PCL 6 driver [IT Resource Center Forums]
Universal Print Driver PCL6 broken on LaserJet 4000 [IT Resource Center Forums]
Printer Command Language [Wikipedia]
Let us know if it works.

HP Laserjet 2605dn / HP Laserjet 2055dn on Windows 7: sorted printing fails

Similar Messages

Maybe you are looking for