HP Laserjet 3015; Win 7; no duplex printing

I just upgraded to a new computer with Windows 7 using my old Laserjet 3015 (3-in-1) printer. Old setup with XP I could print duplex (printing on both sides). Now I cannot with Win 7.. I checked both printer-properties and printer-preferences for duplex printing.,Doesn't do duplex. I downloaded a new (?) driver for PCL5, no change. Called HP Help, after 1/2 hour and checking the same, did not help.
Can anyone suggest what should I do?
Thanks in advance
Peter

Hi Peter,
Please check the Device Settings configuration:
Enter Control Panel > Devices and Printers
Right click the PCL 5 printer icon, then click Printer Properties.
Click the Device Settings tab.
Locate the Two-Sided Printing Accessory option - is it set as installed?
If not, change the value to Installed.
Can you see the Two-Sided printing option under the Printing Shortcuts / Finishing tab?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

HP Laserjet p3005x - jamming during all duplex print jobs

We have recently aquired a used HP Laserjet p3005x printer that jams under the print cartridge during every duplex print job. The message in the printer log is Event 13.05.00 "Fuser output - Paper late jam"

A batch file was created to restart the spooling service when this happens, but as stated earlier this is not a permanent fix.

Laserjet 1020 won't STOP duplex printing

I used to switch from single to double sided printing and back using the printer options / finishing / document option menu.
Now my printer only does duplex printing, even though the print on both sides option is unselected. I have removed and reinstalled printer driver with no change.
How can I get single sided printing back??

Hello,
Thanks for the post. This is an odd one, since you should have the manual duplex ability, but not fully auto. I've included a link below with some information on how to set this up. I might suggest that we try to reverse engineer this one and see we can resolve it that way. Also, another thought here, do you have or have you used another printer on this machine, we may have the incorrect driver selected.
Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00381797&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Laserjet 4L, win 7, will only print test page(s)

When I try to print anything else, I get an error, with no particular message. The documents will just remain in the queue until I delete them. Right after installing, when I would try to print a doc, I would get an error message with options to troubleshoot . That error message said something about the printer being shared. It is not, so I changed that setting. Now when I try to print , the document will remain in the queue with a ! under status. When I try to print manually by pressing the button on the printer, I only get test pages. Also, when I open up printers/devices, there is a ! inside of a yellow caution triangle on the picture of the printer. Any ideas?
Edit: I found a suggestion to hold the button for 5 secs to reset printer. I did it, and the ! in the caution sign is now a green check mark. But, still get an error message in print queue.

Hi I hope you are doing well and very sorry to learn that you are having this issue
If you still having this problem I will do my best to help you.
Please go here and select the operating system to get latest firmware for printer.
GO here
Run this utiliy, http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
Hope I can be of help;
RobertoR
remember ↓↓↓
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How can i print barcodes on a laserjet 3015

replaced a Laserjet 3005 with a Laserjet 3015. Barcodes are not printing on Laserjet 3015. Is this possible on this model? Is there a DIMM that I need to add?
This question was solved.
View Solution.

Hi,
i've met the similar problems before, and i found some important information on
http://www.businessrefinery.com/products/barcode_net_win/upc_a.html
you can got detailed imformation on it. it's really helpful.
Good Luck!

Adobe Reader 8 prints head-to-toe on duplex printer...

I'm working with Adobe Reader 8.1.1 and Windows XP Pro. Using HP Color LaserJet 2605dn, which has automatic duplex printing capability.
I have PDF files that contain several pages. When I set the 2605's "Preferences" to print duplex (print on both sides of the page), it prints the pages "head-to-toe" - page 1 is right side up, page 2 (on the back of page 1) is upside down, page 3 (on the 2nd sheet of paper) is right side up, page 4 (on the back of page 3) is upside down, and so on.
I've experimented with the various settings in Reader's Print dialog box, but nothing makes all the pages print right side up.
I don't know the source of the problem: the multi-page PDFs I'm trying to print were not all created by the same person or software. Duplex printing works correctly when printing multi-page documents from other kinds of software (e.g., Microsoft Word and various databases).
Any suggestions?
Thanks, John

I put this aside. The only thing I can think of, is installing earlier verisons and testing those. I'm not sure Adobe will assist on this issue since Adobe Reader is a free program. I'll post any solutions that come this way.

Manual duplex printing doesn't work for LaserJet 100 color MFP M175a

Hi !
OS Windows 8.1. Printer LaserJet 100 color MFP M175a. Driver version 61.108.8.10073 date 2011 Apr 13th
1. After switching on checkbox "Print on Both Sides (Manually)" on "Finishing" tab of Print Properties Dialog and
start printing, dialog with instruction how to turn paper appears. Then printer must print odd pages, stop for
turning paper and then continue printing of even pages on the back side of paper sheets. But my device prints
all pages sequentually in order 1,2,3,... without any breaks. What is it- my mistake or possible bug in driver ?
2. Windows API function DeviceCapabilities with fwCapability=DC_DUPLEX for this printer returns 0 (duplex printing
impossible). This value for any other HP printer, even without automatic duplexer, always equel to 1.
This question was solved.
View Solution.

Hi @Up205,
I see by your post that you are having issues manually printing two-sided. I can help you with this.
The software for this model on Windows 8.1 is the Basic Solution Software and Driver. This basic software solution provides print and scan functionality only. Did you download and install the newest drivers?
HP LaserJet Pro 100 color MFP M175nw Drivers.
Check to make sure Bidirectional Support is Enabled.
Go to the start up screen, (tiles menu) type in "Devices and Printers", select settings, click on Devices and Printers, right click on the printer, left click Printer Properties, on the Ports tab, put a check beside Enable Bidirectional Support.
You might have to restart the computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one

Low Memory when Printing Excel chart on LaserJet 3015 ll-in-one
When I try to print a chart from Excel 2007 I get a low memory error. All other printing seems to work just fine. I thought it might be because of a color fill in the chart area so I removed the fill but I'm still getting the error.
I've also cleared the fax memory and run through the steps in http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00378226&prodT...
Running: Windows WP pro (SP3)
Printer: LaserJet 3015 all in one
Current driver: HP Lasetjet 3015 PCL 6
Running as a network printer using a D-Link DP301P

When an application is installed to the expansion card, that's the only place where you will see it in the app launcher screen, i.e. by selecting the card. It will not appear in the All category because that only shows apps which are installed to internal memory.
As for the Files application, yes, it only lets you browse contents of the card. For a more robust file management utility which will let you browse your entire phone, you might want to look into a freeware application called FileZ, which I believe is available at www.palmgear.com and other places.
I've never run Documents To Go from a card, but when you open Docs to Go and open the Menu > Options > Manage Applications, there is an option there to move applications to the Card. Never having done that, I'm not sure whether it moves the whole DTG app to a card but, give it a try.
I have oodles of applications and documents stored on my Centro's internal memory, and never have run up against a memory problem. At any time, you can check available memory by going to the application launcher (home) screen, opening the menu, and selecting Info.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

HP LaserJet 1320 Duplex Printing Not working with Windows 7

Hi
I've just bought a new PC with Windows 7 Home Premium. I have an HP LaserJet 1320 printer (Prod no. Q5927A, SN CNGW53RLRY).
I cannot find driver that works the same way as the previous driver HP LaserJet PCL5. If I use this driver and can still get duplex printing but it will only print one copy at a time.
If I upgrade to HP Universal Printing PLC (or PLC v5) I can print multiple copies but not duplex printing. I have searched high and low through the HP site but to no avail.
Any help and advice will be much appreciated.
Thanks
GB

Hello,
I've seen this same issue with my printers (other HP printers) whereby the default setting to support the Duplexing hardware was set to 'off'.
A quick method to check this is look at what the setting is for Duplex hardware in the Device Settings tab, and if it's not set, correct it.
Printer Properties:
From the 'Start' orb -> [Devices & Printers] -> right click on your Printer icon -> select 'Printer Properties' -> click on 'Device Settings' tab.
You should see a dialog similar to the mine (attached): look for the 'Duplex unit (for 2-sided printing)' and see if it's set to "Not Installed":
--> in either case, click on 'Not installed' and from the dropdown box, select 'Installed'... Click 'OK' to accept the changes and close the dialog.
Printing Preferences:
again, right click on your Printer icon -> select 'Printing Preferences' -> click on 'Advanced' tab.
-->Check to see if there is a 'Duplex Hardware' or '2-sided printing' option in here: mine doesn't show one but thougth I'd mention it nonetheless.
Click on the 'Finishing' tab and select 'Print on both sides'...or simply test print a multi-page document and set those preferences on-the-fly.
Let me know if this helps...
HardCopyTed
Regards,
HardCopy (I am employed by HP) [If this was helpful, please mark this 'Solved' or 'Accept as Solution' so others can find this too]
How to Give Kudos | How to mark as Solved
Attachments:
PCL6-DeviceSettingsScreenCap.JPG ‏81 KB

HP Laserjet 3015 won't print after Snow Leopard

Ok, so I upgraded to Snow Leopard, and now I can't print anything on my Laserjet 3015. I've tried uninstalling the printer and then reinstalling it, but still nothing. It seems that any time I try to print it says the printer is "paused". If I press the "resume printer" button while the document is in cue, it doesn't resume the printing. If I delete the document and then press the "resume printer" button it shows that the printer goes back into a ready state. Any suggestions? Thanks!

Both SL and HP have recently updated their software. Have you upgraded to SL 10.6.1 and the latest version of HP drivers?

HP LaserJet Pro M1212nf MFP Printer Duplex Printing Driver

Hello,
I'm consdering about buying HP Laser Jet Pro M1212nf MFP Printer.
I feel like it's the printer that has all the specs that I need.... Except for automatic duplex printing.
Automatic duplex printing is super important to me and I'm sad that the M1212nf does not provide it.
However, I did see that it has duplex printing driver support.
I was wondering what this driver support is (I've been spending hours on the web trying to get a definition but nothing!)
and if it will work on a Mac, I saw couple threads that said that some HP printers don't offer duplex printing driver support for mac computers.
So basilally, I'm wondering how the duplex printing will work if I install the driver support.
Thanks.

Good health! I wanted to download drivers for hp laserjet m1212nf mfp. Does not work, can you help me where to download or buy the drivers, I have lost the native disk driver, now cannot install the printer! thank you! if the error my message I will forgive apologize in advance

Automatic Duplex Printing not working on HP Color LaserJet 3600DN in Windows 7. It worked before.

I have an HP color laserjet 3600 DN on Windows 7. This computer came w/ Windows Vista and a 3600DN driver was installed and the computer was upgraded to Windows 7. The printer did automatic duplex printing.
At one point, my computer indicated that it could no longer find the printer. In an effort to solve this problem, I uninstalled the printer. When I tried to reinstall the printer the computer could not find the driver. At that point I tried to download a windows 7 CLJ 3600 DN driver. Since HP doesn't provide this driver for Windows 7, I tried to download the Windows Vista driver for 3600DN.
However, when I go to the appropriate webpage by following the links, only drivers for Color Laserjet 3600 are listed (no 3600DN drivers).
As far we can tell it only allows Manual Duplex printing (no automatic duplex printing). Clicking the "Two Sided Duplex Printing" option is there but only works when the "print on both sides (Manual)" is set on the Finishing page. If manual is turned off, then it becomes single sided.
Can I get a driver that will allow me to do automatic duplex printing on on my HP CLJ 3600 DN using Windows 7?

How did you replave the duplex belt? How to deassemble the backside of a officejet and click the new belt on? I can't see nor do it y self

Duplex printing doesn't work on HP Laserjet 3055

Hi!
I am a new rMBP user and I need your help with setting up a printer. I want to use my old printer HP LaserJet 3055 for both side printing - using Widnows I didn't have any problem with that. The printer supports manual duplex printing - it means - print odd pages - beep - then I put sheets into the tray and click button - even pages. I use this printer via network.
I was thinking about solution for a few hours. I've tried:
installing printer with PCL, Postscript drivers,
downloaded HP drives from Apple (even app store installed some kind of upgrade but doesn't include 3055)
using HP Laserjet 3052 drivers (it's default choice by OS X)
upgrading remotely printer drives using ltr command in Terminal,
installing printer via USB,
even installing Gutenprint and then hpijs with some sh**
The printer is printing but not on both side My first impression about OS X Yosemite and rMBP is awsome and I know that using so old devices may cause problems but I cannot change my printer.
Help my guys, please!!
PS Sorry for my English

Hi there,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HP Laserjet 1018, Word 2007 on Windows XP - Duplex printing alignment

HP Laserjet 1018, Word 2007 on Windows XP
Want to Print a book on both sides of A4 paper. I am printing one page per
page (not the book mode).
If I print single sided, the top of the page (e.g. header text) on odd and
even pages are aligned. When I print duplex mode, odd pages print fine but
the even pages are shifted down. Thus the header text are not aligned.
I think this is more a problem with the way the printer is managing duplex
printing.While printing in duplex mode, the printer first prints in reverse (with bottom of
the page as ref) to enable placement of the output sheets back into the input
tray without rotation. Is this messing up the alignment?
- Jayawanth

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Lost duplex printing in Win 8.1

Everything printed double-sided on my HP Pro 1106dn using Acrobat Reader XI until i just upgraded to Win 8.1. Now there seems to be no way to get duplex printing anymore from Acrobat. No problems with other programs.
I can look for a Win 8.1 forum to post there too, but it seems to be an Adobe problem. This would never have gotten by me when I was a systems programmer. This is not USA standard quality!

Moved to Adobe Reader

HP Laserjet 3015; Win 7; no duplex printing

Similar Messages

Maybe you are looking for